| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 26.2 | Corvette Rear End....68 to 79 | MR4DEC::CWHITE | | Tue Apr 30 1991 11:32 | 13 |
| Chevy Corvette REAR END for sale
I believe the gear ratio is 348....but don't quote me. It also
works......bolt in, drive away!
$275 or best offer.
chet white @297-7930 or mail to MR4DEC::Cwhite
|
| 26.3 | Stock Corvette Rims....off 68 roadster | MR4DEC::CWHITE | | Tue Apr 30 1991 11:35 | 7 |
| Set of four stock Corvette Rally wheels.....off a 68 roadster.
I believe that the covers and dream rings are there too.......
$400 or best offer.
chet white @297-7930 or MR4DEC::Cwhite
|
| 26.4 | Complete Chevy 350 Engine | CUJO::BROWN | Dave Brown | Wed May 01 1991 21:22 | 12 |
|
Complete 350. Block casting #3970010. Includes your choice of a GM
dual plane or an Edlebrock dual plane intake manifold. Currently in my
'68 Firebird and runs but needs a rebuild.
Also includes bell housing and clutch assy.
Price is negotiable but what I'd really like is to trade for a
Pontiac 428 or 455 builder; part or full trade that is.
Dave
|
| 26.5 | vet rear? | SWAM2::KLINE_ST | | Thu May 02 1991 18:44 | 5 |
| re:.2
what year vet is the rear end out of? is it irs?
steve kline @fvo
|
| 26.6 | Title | WFOV11::KOEHLER | I'll turn out the lights | Fri May 03 1991 12:49 | 4 |
| The answer is in the title ....68-79
The Mad Weldor....Jim
|
| 26.7 | Camaro Parts | POWDML::SPENCER_L | | Mon May 06 1991 07:43 | 3 |
| 78 Camaro nose - complete - perfect $500 obo. Also other misc. 78 parts
Send mail only POWDML::SPENCER_L
|
| 26.8 | YEAR AND QUESTION | MR4DEC::CWHITE | | Thu May 30 1991 13:34 | 3 |
| out of a 68........whats 'irs'?
chet
|
| 26.9 | It's not very taxing!?!? | STEREO::BEAUDET | | Fri May 31 1991 08:46 | 3 |
| irs = independent rear suspension?
/tb/
|
| 26.10 | misc stuff 4 sale | AKOCOA::DENINE | | Mon Jun 03 1991 01:31 | 8 |
| for sale 1971 350 chevy block .new cam bearings,frez plugs stand bore.
set of sm block heads cast#492 off of 68 327 camaro complete rebuilt
1.94's manley stainless super flow 3 angle cut .bronze wall guides
350 crank turned .10/.10 asking 75.00 for the block 500.00 for
the heads and 75.00 for the crank.also have rebuilt turbo 350
tranny with shift kit this is a short tail tranny out of 70
camaro . 200.00 or b.o. tranny has 30 day garantee. 4spd tranny
out of 78 Z28 175.00 or b.o.also has 30 day garantee
|
| 26.12 | many chevy parts | SMARTT::REARWIN | the quality of mercy is not strained | Sun Jul 21 1991 12:11 | 23 |
| CNTROL::REARWIN
dtn 225-5448
HLO1-1/q10
Matt
1970-81 GM F-CAR PARTS: 10-Bolt non-posi differential 2.56:1 gear ratio, $150,
Driveshaft w/U-joints for automatic tranny equipped F-car, $10. 1970-81 F-car
control arms, front disks, and spindles, $50.
GM PARTS: Chevy Small block heads: 1.72" intake valves, $10. 1970 350V8 PS
pump, $10.
CHEVY PERFORMANCE PARTS: Brand new, Never used, still in box General Kinetics
hydraulic camshaft. 292 degree duration, .460" lift, 114 degree lobe centers.
Asking $85.
76 Camaro rally rims with center caps, $80.
65 Chevy 396, taken apart, never rebuilt, $300.
74-77 Camaro taillights, $20 per pair
70-81 Camaro door glass, $50.
|
| 26.13 | misc parts | WMOIS::DENINE_V | | Tue Jul 30 1991 21:38 | 8 |
| WMOIS::DENINE
1970/71 454 big block heads both sets need to be rebuilt 50.00ea
1970 454 factory alum intake 50.00 71 454 cast intake 20.00
1970 small block crank 40.00
1970 350 block 75.00 all machine completed.
torker intake still in box never used. 50.00
|
| 26.14 | `58-61 Corvette nose | EXPRES::JMALESKY | | Mon Aug 12 1991 07:15 | 9 |
| For Sale
1-piece `glass nose for 1958-1961 Corvette
It's an after-market, don't know manufacturer.
Asking $350.00 or best offer.....
Call John @ DTN 289-1315 or 289-1883 and leave message
Home (Auburn,Ma.) 508/832-2984
|
| 26.15 | 355 for sale | WMOIS::DENINE_V | | Mon Aug 12 1991 22:57 | 6 |
| 425 hp small block chevy 4 sale
1971 350 2 bolt main with main studds bored .030 parelell decked
492 casting 1.94 heads cc'd and have had mild porting(super stock
heads).490 .490 308 duration cam / comp cams roller rockers
750 holley carb GM hei ignition With hy fire coil
must sell 1800 or best offer
|
| 26.16 | | FROSTY::FISHER | | Mon Sep 16 1991 09:13 | 9 |
|
I have the following Chevy parts available for sale:
2 sets of 1969 Chevelle quarter extensions with taillights
1 set 1966 Belair/Biscayne/Impala taillights
Best offer
send mail to AKOV13::TFISHER
|
| 26.17 | 1978 Vette rally wheels, caps, rings 4-sale | ROYALT::JEWETT | | Tue Sep 17 1991 14:38 | 14 |
| Contact: Bill Jewett
Dtn: 235-8244
VAXmail: ROYALT::JEWETT
Set of (4) factory rally wheels off a 1978 Corvette. Complete
with center caps and trim rings - very good condition - purchased
from the owner of the car back in 1982 and stored since then.
Silver in color - size 15x8"
$300.00
These are located in Clinton, Ma. and can be seen there or at DSG1
in Westford, Ma.
|
| 26.18 | smallblock 400 for sale | WMOIS::DENINE_V | | Sun Sep 22 1991 00:11 | 4 |
| wmois::Denine_v
632-7209
I have a 400 4 bolt main block .I am asking 50.00 for it.
Also 400 heads asking 50.00 for them also.
|
| 26.21 | Clean out time | POWDML::SPENCER_L | | Mon Jan 06 1992 09:19 | 12 |
| 78' Camaro nose complete. No rot. $500 obo.
70-81' Camaro 12 bolt posi rearend $350 obo
87' TPI setup complete less harness $500
70-81' T top weather strips $50/side obo
Some other misc. Camaro items,
send mail to POWDML::SPENCER_L
|
| 26.23 | Clutch Set-up w/bellhousing | PIPPER::GEORGE | | Tue Feb 11 1992 13:01 | 11 |
| Used 10 1/2" clutch set up, less than 1K miles; steel wheel (14")
for 2 piece rear main, diaphragm pressure plate, disk, throwout
bearing. Also have aluminum bellhousing, but has small piece "chewed"
from bottom (road clearance problem, it appears).
Make an offer, or swap for 11" flywheel for same application.
Steve George
Druid::george
dtn 232-2247
|
| 26.24 | 4-speed shifter, corvette | MILKWY::STEVENS | Barney? | Mon Apr 13 1992 11:51 | 7 |
| '68-'76 4-speed shifter, new in GM box. $150/obo
Jim Stevens
FXO1/27
DTN: 296-5698
MILKWY::STEVENS
|
| 26.25 | Muncie 4-speed For Sale | STOKES::JMALESKY | | Wed Apr 29 1992 13:39 | 8 |
| Muncie M-20 wide ratio 4 speed
1963-65
Excellent condition
$275 firm
Call John @ DTN 223-3262 or home @ 508/832-2984
KELVIN::JMALESKY
|
| 26.26 | Tilt Column | CRISTA::ROCHE | | Wed Apr 29 1992 14:40 | 7 |
| Tilt column, auto on column. Will fit 70-72 Monte Carlo and
'68-72 Chevelle/Malibu/El Camino. May fit other 68-72 GM
A-bodies (any with indicator in dash).
$100
Call Chris @dtn 285-3809 or home @603-437-2117
|
| 26.28 | parting out 74 v8 monza | CSLALL::PERRICO | | Mon Jul 27 1992 11:17 | 16 |
| <<< CUJO::SYS$SYSDEVICE:[NOTES$LIBRARY]MUSCLECARS.NOTE;1 >>>
-< Musclecars >-
================================================================================
Note 94.0 parting out 74 v8 monza No replies
CSLALL::PERRICO 10 lines 27-JUL-1992 09:23
--------------------------------------------------------------------------------
PAUL ERRICO
DTN;275-3176 (PLEASE DO NOT USE)
CSLALL::PERRICO (PLEASE USE)
Parting out one 1974 chevy v8 monza orig. from texas
All parts in great condition have everything except
motor and trans but I do still have the motor mounts
no reasonable offer refused on any item
home # (603)890-6680ask for my brother steve
|
| 26.30 | 454 Chevy | MIMS::MACIOLEK_M | I went to UCLA - for Lunch | Thu Aug 13 1992 15:22 | 19 |
| Mike Maciolek
Mims::maciolek_m
DTN 343-0317
Atlanta, GA.
454 CID Chevy Engine, professionally rebuilt.
Cam: Comp Cams 270, Comp Cams roller tipped rockers
Carb: Holly 650 Double Pumper
Hooker 2�" headers
Edlbrock Torquer manifold
Moroso gold anodized valve covers, air cleaner.
Engine has approx. 500 miles on it. I have all reciepts and
documentation. OEM parts (I had to provide the pieces) were all
purchased from Chevy Dealer. Performance parts from Summit Racing.
Engine is in a 1974 Chevelle which comes with the engine. The body's
ok. $4000 invested (pi$$ed away?), will take reasonable offer.
Mike
|
| 26.32 | | WMOIS::DENINE_V | | Wed Oct 14 1992 18:35 | 25 |
| WMOIS::DENINE_V
HOME(508)632-7209
492 small block chevy heads BRAND NEW 600.00 or b.o.
1970 010 block complete machined 75.00 or b.o.
1970 crank turned 10/10 50.00
edelbrock manifold new in box 50.00
matching torker cam new in box 50.00
comp cams roller rocker and push rod set new in box 120.00
2 set of bare 454 heads open chamber 50.00
turbo 350 tranny w shift kit 150.00(rebuilt)
|
| 26.33 | moving sale | WMOIS::DENINE_V | | Fri Oct 16 1992 14:28 | 16 |
|
1974-81 nos right rear quarter 50.00
1970 AMC-AMX driver and passenger doors 50.00
1970 AMX trunk lids 25.00 ea
1970 AMX side exhaust 500.00
door glass fact tint 20.00 ea
rear windshield (tinted 20.00)
1970 right rear quater for javlin NOS 200.00
1967 chevelle super sport emblems and ss 396 emblem 30.00 ea
1970 ss nova hood emblems 30.00
1970 ss nova interior comlpete black leather and wood grain
door panels 500.00
1970 nova ss 12 bolt posi 7:73 posi 400.00
|
| 26.34 | 350 ENGINE REDUCED AGAIN! | WMOIS::WAITT_D | | Mon Nov 30 1992 05:14 | 37 |
|
DAVID WAITT
WMOIS::WAITT_D
DTN 241-4439
WESTMINSTER
HOME (508)537-7225
LEOMINSTER
For Sale:
Newly built never started 350 cu inch Chevy engine. 4-bolt mains, hot
tanked, bored .030 over decked, and honed for moly rings.
Heads - late model hardened valve seats, mild port and polish, 3-angle
valve job. New springs, retainers, ect.. All Comp Cams. Magnum Roller
tip rockers.
Cam - Comp Cams 268 magnum, Comp cams lifters, pusrods, and double
roller timing chain.
Pistons and rods - Pistons are Trw forged 10-1 with chrome moly rings,
rods are resized, and there are Clevite 77 bearings throughout the eng.
Edelbrock performer 2101 manifold, Holley new 2 pc alum. carb 600 cfm
vac secondaries.
New water pump, Trw hi-vol oil pump, Chrome Holley fuel pump,Chrome
Moroso tall valve covers, chrome timing cover, chrome oil pan,chrome
nuts and bolts.
Complete Accel hei intensifier kit, 11" flywheel resurfaced, and many
other goodies.
This engine was built to be streetable. I have over $4000.00 invested
I'm asking $2000.00 FIRM. I also have an engine crane for sale in
new cond. I will only sell the crane with the engine or after the engine
is sold.
|
| 26.38 | 79 COR/REAREND COMPLETE | STRATA::PEROTTI | | Wed Feb 10 1993 13:27 | 11 |
|
1979 CORVETTE REAR END. COMPLETED REAR WITH 1/2 SHAFTS, SPINDLES AND
ROTORS. CALIPERS ARE THERE BUT ARE PROBABLY JUNK. THE WHOLE UNIT HAS
BEEN SITTING IN MY GARAGE FOR 10 YEARS....
WHOLE UNIT BELIEVE IT OR NOT ONLY HAS APP.12K ON IT...
BEST OFFER.....
PAUL PEROTTI
SCOMAN::PEROTTI
DTN 568-5958
|
| 26.39 | Corvette/Chevy parts | SANTEE::AUGENSTEIN | | Tue Jul 13 1993 12:14 | 67 |
| Bruce Augenstein
DTN: 297-7387
MR4DEC::AUGENSTEIN, or Bruce Augenstein @MRO
Home: (508)263-3568
- Two (2) Michelin XGT+ tires, size 315/40ZR16, worn about 30% (meaning they
have around 70% of original tread depth). They fit the rear of any 16" wheeled
Corvette ('84-'88), or the rear of any Porsche Turbo (Note: May fit non-turbo
911s, but *must* have at least an 8 1/2 inch rim width). Will also fit late
IROC/Z28 Camaros (I am told) with 8 1/2" rims (rear only). These are *not* the
XGTs you're familiar with, but the ultra-high performance "pluses", which are a
completely different tire. Far superior in every way to the Goodyear Gatorbacks
they replaced on my car. 10 inch treadwidth. Excellent condition. $150.00 for
the pair. (around $520 new)
- Modified air filter lid and K&N air filter element. Fits any '84-'89 Vette,
and the combo is good for 10-12 HP over stock (not quite 2 car lengths in the
quarter mile). Plus, your engine gets to breathe *cleaner* air than with the
stock filter. As-new condition. $40.00. Note: The modified lid is precisely like
the one in the Mid-America or Eckler's catalog (I forget which) selling for
around $125.00. Ridiculous.
- Two (2) Hypertech engine control computer chips (Stage I and Stage II) for
1985 4+3 Corvette. Smog Legal. Stage 1 gets about 1.5 car lengths in the quarter
mile, while Stage II (designed to be run with a 160 degree thermostat) is good
for around 3 car lengths. These chips do not affect part-throttle operation.
$45.00 each. Both for $75.00.
- Underdrive crank pulley. Runs accessories 22% slower than stock. Fits '84-'91
Vettes, and (I am told) late Camaros with serpentine belts. Includes the belt
for '84-'86 Vettes (different belt length for later models). Good for a
car-length in the quarter. $25.00.
- Stock 4+3 shift linkage and lever for all '84-'88 stick Vettes. As new. $50.00.
- Stock '84-'86 Corvette "Ram's Horn" stainless steel exhaust headers. Will fit
any small-block Chevy, and will flow better than any other stock header.
Includes air injection pipes and some accessory bracketry. Excellent condition.
$50.00.
- Stock '82 (and maybe earlier) thru '85 Corvette stainless steel 2 1/2 inch "Y"
pipe. Will fit '86-'91 Corvettes, but the square flange at the rear will need to
be cut off in order to match the slip-fit connection on the later models. The
advantage is that this Y pipe does not have the pre-cats as the later ones do,
so you pick up 5-7 HP. $30.00
- Two (2) stock '84-'85 (meaning they have a black center section) 16 x 8 1/2
inch left side wheels. Will fit any 16" wheeled Vette, and, I am told, late
Camaros as well. Cosmetically marred (black marks in the clearcoat), but
struturally straight and solid. $100.00 for the pair, including the wheel
touch-up kit, or $180.00 for the pair if I do the resto to your satisfaction.
- Three (2) Fram PH30 Extra guard oil filters. Fit screw-on-filter small blocks
from around 3000 B.C. thru now, excluding LT1s. $2.00 each.
- Eight (8) Bosch Platinum Spark plugs, for iron-headed late small blocks, and
all '87-up 5.0 Mustangs. New, in packages. $12.00.
- '85 Corvette shop manual, including electrical supplement. $15.00.
- '85 Corvette valve springs, pushrods, and rockers, packaged as they were
originally mated (I.E. - #1 intake set, #1 exhaust set, etc.) in excellent
condition. 16 of everything. $25.00.
The (sigh) end of an era for me.
Bruce
|
| 26.40 | mucho parts | WMOIS::DENINE_V | | Thu Jul 15 1993 20:00 | 25 |
| VAL DENINE
DTN 874-3343
WMOIS::DENINE_V
508-632-7209
Have lots of stuff that needs to go.
1-1971 lt-1 350 330hp motor has bad blow by. 800.00
1968 327 3 bbl motor 250 needs to be rebuilt
1 1970 350 4 bolt motor complete 350.00
have a set of angle plugged turbo casting heads 202 valves
new castings have been ported polished and cc'd .price is neg
1 set of bare browfield aluminum heads.
2 sets of power pack heads cant remember the casting # 75.00 a pair
1 set of 492 casting straight plug heads all high performance
machined super/stock heads. 900 or best offer.
quite a few edelbrock manifolds price ranges as some are new and
some are used.
new roller rockers and push rods (comp cams)125.00
Also a back to the blocks.1 010 casting block standard bore
freeze pulgs and cam bearings all done relieved for a 400 crank
(stroker)100.00 for the block.
400 crank 5.7 ratio rods and custom pistons flex plate and harmonic
balancer 400.00 or best offer.
4 350 cranks all turned .10/.10 with bearings 100.00 ea.
That's it for now.
|
| 26.42 | Camaro Spoiler for SALE... | CARROL::YOUNG | where is this place in space??? | Wed Jul 28 1993 12:42 | 4 |
|
FOR SALE - 67' THRU 69' Fiberglass Repro Trunk Lid Mount Spoiler for a
Camaro still in the Box from Year One. $50
|
| 26.44 | Chevy 350 pistons for sale | WFOV12::SCHRAFT | Peter C. Schraft 242-2235 | Fri Sep 24 1993 14:27 | 7 |
| Peter C. Schraft
dtn 242-2235
WFOOFF::SCHRAFT
Brand new set of chevy .030 over 350 ci TRW cast pistons,
part number of L3026F. They pistons have a .065" deep dish.
The price $75.
|
| 26.45 | 350 bullet | WMOIS::DENINE_V | | Fri Nov 19 1993 06:29 | 18 |
| wmois::Denine_v
DTN 241-3343
Hi Performance small block 350 chevy 450 horse power
No expense has been spared.Dyno sheet available
292 tubro catings(angle plugged heads)with 2.02" manley super flow
stainless steel valves .cc'd also ported and flow bench tested
standard bore 4 bolt main block clevite bearings chrome moly rings
10.5to 1 compression the crank did not need turning balanced pink
rods heavy duty rod bolts and main stud kit .510 lift cam comp cams
roller rockers and push rods with guide plates.reworked GM hei
distributor edelbrock torker manifold 750 holley carb vara water
injection .Also have tunnel ram set up drilled and set for NOS
fogger system.Will sell tunnel ram and Nos fogger system separetley.
Motor is currently in my truck .and can be seen and heard.
|
| 26.47 | `67-8 Camaro SS hood | HOTLNE::MALESKY | | Tue Mar 15 1994 10:18 | 11 |
| John Malesky Contact owner: Richie (Shrewsbury)
DTN 225-5110 (508)791-0542
HOTLNE::MALESKY
FOR SALE --
1967-68 Camaro factory SS hood.
Has `67 chrome louvers mounted in it.
Hood is primered and in good shape.
$ 275 obo...
|
| 26.49 | BUCKET SEATS FOR 68-79 CORVETTE | MPGS::BUJA | | Fri Aug 05 1994 09:49 | 8 |
| JOHN BUJA
DTN 237-2383
MPGS::BUJA
HOME # 508 537-6097
FOR SALE...........TAN BUCKET SEATS FOR 68-79 CORVETTE
COMPLETE SET JUST NEEDS TO BE BOLTED TO FLOOR.
BEST OFFER
|
| 26.50 | HOOD FOR 63/64 CORVETTE | MPGS::BUJA | | Fri Aug 05 1994 09:54 | 7 |
| JOHN BUJA
DTN 237-2383
MPGS::BUJA
HOME # 508 537-6097
FOR SALE........FIBERGLASS HOOD FOR A 63/64 CORVETTE
BEST OFFER
|
| 26.51 | Race Motor for sale | PULMAN::BERGER_P | | Fri Aug 26 1994 15:19 | 31 |
| Phil Berger
DTN 223-2626
Railrd::berger_p
540 C.I. BBC
Complete Bill Mitchell motor, 900+ HP
Bowtie block, 4.50 bore
BRC crank (4.25 stroke), pistons (14 to 1) and steel rods
Dart aluminium 360 heads, ported with jesel rockers
Comp cams roller cam
Jesel belt drive
Dart intake
Bary Grant dominator
Fluidamper
MSD crank trigger and distributor
Every other part in this motor is the best you can buy!
Just freshened up, new valve springs. Has run 8.60 @163 in 2500 lb
cammaro. Last saturday it went 8.50 @151 in 1700 lb dragster set
to 3/4 throttle in high gear!
Runs like a charm. I drive it around the pits, to the line and back
to the trailer after each run.
Reason for selling. To much motor! I plan to run super comp and
the car is already .40 to quick with much more to follow.
This motor new cost over 20k. Will sell for 10k firm.
|
| 26.52 | Chevy TH350 Auto $350 | CXCAD::FRASER | | Tue Nov 01 1994 14:44 | 24 |
| Brian H. Fraser
8630 Avens Circle
Colorado Springs
Colorado 80920
Home 260-9356
DTN 548-3568
CXCAD::FRASER
Chevy TH350 automatic transmission $350
Freshly rebuilt. Manual and auto valve body. (Can be put in drive
it will shift buy itself, or when you bump the shifter it shifts, instantly.)
Was built for a street/strip car. (drag race) This tranny had about 1500 miles
on it after the first rebuild and I thought it was slipping, so I had it
gone through and freshened up again. Put this transmission back in the car and
found out the problem was really a bad torque converter. Sold the race motor
and put the stock motor back in with a new converter, drove it around the block
a couple times and parked it... Now I am about to put the stock tranny back in
and therefor I have an unneeded really nice TH350 transmission. The car can
be driven to check out the tranny before it is sold. The tranny does not shift
harshly. In drive it is perfectly normal, and shifted manually it is just nice
and crisp. If the numbers matched the rest of the car I would be perfectly
happy to leave it in...
Installation negotiable...
|
| 26.53 | 400 sbc blocks etc for sale | CXCAD::FRASER | | Mon Jan 09 1995 10:29 | 21 |
| Hi,
I'm doing some garage cleaning and have some 400 sbc parts for sale.
1971 4 bolt 400 block
197? 2 bolt 400 block
1 head, cleaned/manafluxed,box of springs/keepers and a few good valves
2 sets of piston/rod assemblies
harmonic balancer/flexplate (400 external balance)
1 crankshaft, needs to be turned
Make me a reasonable offer on the balancer/flexplate and the 4 bolt block, and
any unreasonable offer on everything else....
Brian Fraser
8630 Avens Circle
Colorado Springs
Colorado 80920
Home 260-9356
work 548-3568 <- use
dtn cxcad::fraser <- use
|
| 26.54 | Check casting #'s | ASABET::HAMEL | | Mon Jan 09 1995 11:16 | 7 |
| Re -1
Correct me if I'm wrong, but I thought Chevy never made a 4 bolt
400.???
Mark
|
| 26.55 | foot in mouth | ASABET::HAMEL | | Mon Jan 09 1995 11:20 | 4 |
| I'm sorry, my mistake they did indeed make them in 70-72.
mh
|
| 26.56 | Yup 71-72 | CXCAD::FRASER | | Mon Jan 09 1995 12:16 | 4 |
| I though it was only 71 and 72 but could be 70 also. Thats why they are fairly
rare....
Brian...
|
| 26.58 | 69 Chevelle parts for sale | IAGO::D_HURLEY | | Wed Sep 06 1995 14:11 | 25 |
| I have some 69 Chevelle parts that I've been holding on to forever
that I'd like to get rid of. I haven't a clue what there worth. I'll
put them up here first, if noone is interested I'll put them in the
Want Ad. So, if anyone could tell me a ballpark price on what they'd
be worth I'd appreciate it.
All parts are in excellent shape.
Drivers door
Rear deck lid
Rear bumber
Rear light assembly (tail lights)
As you can tell I took this car out in the front! :-(
Thanks,
Dan dtn 226-2204
|
| 26.59 | TRICK 454 w/Blower | BSS::BOREN | | Fri Jan 26 1996 06:55 | 20 |
| 26.60 | can you see over it? | TROOA::GILES | | Wed Feb 14 1996 09:31 | 4 |
| This would be an interesting sight! Is the blower on top of the
tunnelram or what ????
Stan
|
| 26.61 | | BSS::BOREN | | Thu Feb 15 1996 05:12 | 2 |
| 26.63 | SBC Camshafts For Sale | HOTLNE::MALESKY | | Wed Mar 06 1996 12:28 | 29 |
| John Malesky
HOTLNE::MALESKY
DTN 225-5110
Home (508)832-2984
FOR SALE
Small block Chevrolet camshafts:
1) CRANE hydraulic grind #SSH310 $150.00
Valve lift @ Intake - .485"
Valve lift @ Exhaust - .485"
Adv. duration 310 Int. 310 Exh.
RPM range 3200-6700
2) REED roller grind #T292-302R9A3 $200.00
Valve lift @ Intake - .551"
Valve lift @ Exhaust - .560"
Adv. duration 292 Int. 302 Exh.
RPM range 2800-6500
3) CHET HERBERT roller grind #C6K $250.00
Valve lift @ Intake - .575"
Valve lift @ Exhaust - .600"
Adv. duration 285 Int. 295 Exh.
RPM range 2500-6800
All three are complete with lifters and matching springs
and are like new.
|
| 26.64 | 2.8 MPFI engine and transmiss | DANGER::HARTWELL | | Thu Mar 07 1996 06:37 | 20 |
| Dave Hartwell
236 Sawyer Rd.
Bolton, MA. 01740
NEW GM 2.8 V6 MPFI engine with 3-spd auto transaxle for sale. All
new with 2K miles, not rebuilt. Engine alone sells for over $3000
new.
Includes all sensors, computer, wiring harness, AC, PS pump, CV
shafts, etc.
Need money, selling at a loss for $1150.00
Days:(508)493-4109, Nites/Wknds:(508)779-0338
|
| 26.65 | 2step,HEI dist, soft touch | BSS::BOREN | | Wed Apr 24 1996 07:04 | 21 |
| <<< VMSNET::DSA120:[NOTESFILES]DRAG_RACING.NOTE;2 >>>
-< DRAG_RACING >-
================================================================================
Note 58.13 --> FOR SALE <-- 13 of 13
BSS::BOREN 13 lines 24-APR-1996 08:01
-< 2step,HEI dist, soft touch >-
--------------------------------------------------------------------------------
rich boren
bss::boren <---------
home/work 901.371.9507
FOR SALE:
MSD soft touch (for HEI ign systems) $35.00
MSD 2-step $25.00
HEI (for sbc) w/o cap $50.00
|
| 26.66 | 283(1957), BBC 2-4's, '57 bumpers | BSS::BOREN | | Sun Jul 07 1996 07:57 | 23 |
| rich boren
bss::boren <----
(901)371-9507
$500 Original 1957 casting #'d SBC 283 w/2bbl. It's in a recent addition to
my corral of rides ;^), it runs great, no smoke and the seller
indicated it was rebuilt 9 years ago when the car had 99K, it shows
128K now. Complete pan to carb. Shipping could be arranged. I plan to
remove it in september. I've got a very fresh HP327 to replace it with.
$650 BBC (454/427) Tunnel ram, w/linkage, (2) 650 center squirters ready
to go. The carbs and linkage would cost more than the asking price :^)
$175 Glass hood, 1957 Chevy
$500 Front and rear 5 piece bumpers: 1957 BelAir (they need rechromed)
|
| 26.67 | | BSS::BOREN | | Wed Jul 10 1996 12:48 | 2 |
| re: .66 -- everything is gone....
rich
|
| 26.68 | misc for sale | BSS::BOREN | | Fri Jul 12 1996 05:51 | 26 |
|
rich boren
bss::boren <----
(901)371-9507
I'm starting to get the '57 210 setup and converted to a 'tow vehicle
for the '57 BelAir (gone Pro Street)...in the process I've done some
trading and have a few extra parts:
set of 30 over 283 13:1 dome top vanolia pistons w/pins $300.00
(2) 1955 Chevy rear bumpers.... need rechromed - make offer
(have push bars (3) piece
(4) 1981 Camero rally wheels w/beauty rings 7x14 with nearly new
14x225 70 GoodYear Eagle ST's $300
(2) RCI Racing (Baja) Highback) seats w/covers and padding, black,
(no rails) in JEGS for $62.99each MAKE OFFER
|
| 26.69 | 1966 Chevelle BB motor $600 | LUDWIG::MALESKY | | Tue Apr 15 1997 15:26 | 12 |
| John Malesky
DTN 225-5307 (home) (508)832-2984
SCOMAN::MALESKY
For Sale
Big Block Chevrolet engine from a
1966 Chevelle 396/325 hp.(by casting #'s)
Complete: heads,Q-jet intake,carb.,dist.,etc.
Has not been run in last 10 yrs.
$600.00 Can be seen in Auburn,Mass.
|