| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 7.1 | Muncie 4 speed | RANGER::BONAZZOLI | | Mon Apr 22 1991 11:54 | 11 |
| Muncie M22 "stonecrusher" 4-speed for sale
Fine spline input, large dia. output.
$550. or b.o.
Send mail to Ranger::Bonazzoli if interested.
Tranny is located in Hudson, Ma.
Rich
|
| 7.2 | AMC 4sale | AKOCOA::DENINE | | Wed May 08 1991 06:08 | 6 |
| I no it doesn't belong here Dave but I am going to try to sneak it
in as I didn't see a file for All Most a Car (amc).
For Sale 1970 Javlen sst rebuilt 360 new brakes good rubber
all original must sell I WANT BIG BLOCK VETTE!!!!! $3000 orbo
call 368-7586 or 928-5498
|
| 7.3 | | AKOCOA::DENINE | | Fri May 10 1991 05:28 | 4 |
|
|
| 7.4 | TOYS MUST GO | AKOCOA::DENINE | | Fri May 10 1991 05:47 | 8 |
| 350crank turned 10/10 25.00
350 heads 70 mod year 250 hp heads 50.00
4 SPD tranny out of 80 z28 125.00
turbo 350 short tail out of early 70's camaro with shift kit 100.00
remmington xt120 p225 60 series new 70 miles on them came off z28
300.00 call 928-5498 or send mail to Val Denine @WMO
|
| 7.6 | Looking to sell a few toys..... | NEST::POLLIER | | Thu Jun 06 1991 15:33 | 12 |
|
My husband is a longtime collector of old classic cars and is interested
in sellig these listed items which are fully restored and in mint conditon.
The cars all orginate from down South:
If interested contact me at Nest::Pollier
1967 Chevelle (includes 1967 Chevelle parts car)
1967 Barracuda
Boat (6 seater, inboard motor, early 70's motor,
new trailer)
|
| 7.8 | WantAd | ASABET::HAMEL | | Fri Jul 12 1991 12:07 | 9 |
| Am I missing something or does the WantAd no longer carry Auto Parts&
Accessorys. Was looking through someones WantAd this morning and
couldn't find this section. This used to be only reason I used to
buy this rag. ??????????????????
Mark
|
| 7.9 | | BARUBA::REARWIN | the quality of mercy is not strained | Fri Jul 12 1991 16:20 | 1 |
| look under Vehicle Parts and Accessories.
|
| 7.10 | motor $50.00 | GIAMEM::IRWIN | | Mon Jul 15 1991 11:43 | 10 |
| I have a 1978 Olds 350cu w/ tranny TH350.
$50.00 and its yours.
Need out of yard.
dtn 297-4037
giamem::irwin
|
| 7.11 | tranmissions 4sale | WMOIS::DENINE_V | | Tue Jul 30 1991 21:25 | 5 |
| turbo 350 tranny rebuilt 100.00
4 spd tranny 100.00 both for 74 to 81 camaro/firebird.
send mail to wmois::Denine
|
| 7.13 | AMC for sale | DNEAST::RUSSO_JIM | | Wed Aug 07 1991 08:47 | 4 |
| for sale for brother
19?? amc ,401ci,ready to go just turn key,asking
$6500 .It lives up in Maine not driven in winter. Send mail to above
address.
|
| 7.14 | 1967 Olds 425cu for sale | GIAMEM::IRWIN | | Thu Aug 15 1991 15:07 | 8 |
| 1967 Olds 425cu w/TH350
$200.00 for both
Art Irwin
dtn 297-4037
giamem::irwin
|
| 7.15 | Need a taillight assembly? | FROSTY::FISHER | | Tue Sep 03 1991 13:56 | 29 |
|
Does anyone have a need for any of the following used taillight
assemblies?
1968 Charger
1969 Charger
1970 Challenger (Complete including centerpiece)
1969 Mustang
1970 Mustang
1967 Chevelle
1969 Chevelle
1966 Caprice/Impala
1968 Impala
1959 Impala
1968 Cougar
1969 Cougar
1969 Torino
1968 Torino
195? Dodge D-500
Misc Falcon
Misc Big Ford
And MANY, MANY others!
If so, send mail to AKOV13::TFISHER and let me know what you need.
Tom
|
| 7.16 | Maybe a sale at the FF afterall. | WFOV11::KOEHLER | Fantasy Factory frensy | Wed Sep 04 1991 09:57 | 4 |
| Geesch Tom, when you come down to pick up your 289 long block you can
bring along the Falcon parts to see if I can use any of them...:-)
The Mad Weldor....Jim
|
| 7.17 | | FROSTY::FISHER | | Wed Sep 04 1991 10:20 | 10 |
|
Jim,
Wow, busted! I promise that someday, repeat someday, I will buy that
289 of yours. Also, I have a line on a bunch of decent Falcon
sheetmetal. Are you looking for any? I know of half a dozen or so
64-65 Hoods, and a decent 60-63 front end clip. Shoot me a line
on AKOV13::TFISHER if you have any interest.
Tom
|
| 7.18 | torch turkey-tow away | COMET::CARTERJ | Long-legged H_M Queen | Thu Sep 05 1991 11:25 | 6 |
|
78' Firebird,four speed,needs engine rebuilt.
$ 300.00
Send mail to above address...
jaz
|
| 7.19 | engines for sale | WMOIS::DENINE_V | | Sat Sep 21 1991 23:54 | 3 |
| I have some engines for sale 327chevies comlete for 250.00
Big blocks for 500.00 send mail to Denine_V@wmois
or call 508 632-7209
|
| 7.20 | HOLLEY Carburetor for sale | MR4DEC::CWHITE | | Mon Sep 23 1991 09:43 | 12 |
| For Sale:
Almost brand new Holley 650cfm four barrel (Spread bore) Dual feed
with Vaccum Secondaries......This is the new two piece aluminum
version.
Paid almost $300 will sell for $150.
Will throw in a spring kit (never used)
chet.....297-7930
MR4DEC::CWHITE
|
| 7.21 | Holley 600cfm DP 4-SALE | WLDWST::MARTIN_T | Too Smooth | Wed Sep 25 1991 11:41 | 17 |
|
Performance 4-Barrel Carburator
Holley 600cfm Double Pumper (mechanical secondaries)
extra squirters, accl pumps, power valves, jets etc. Also have a
duel (chrome braided) fuel line. NEW electric choke. REBUILT
ASKING: $90.00 OBO send inquiries to WLDWST::MARTIN_T
|
| 7.23 | Cleaned up a bit by the Mod. Let's keep to the subjext | CUJO::BROWN | Dave Brown | Tue Oct 08 1991 19:50 | 110 |
| <<< CUJO::SYS$SYSDEVICE:[NOTES$LIBRARY]MUSCLECARS.NOTE;1 >>>
-< Musclecars >-
================================================================================
Note 7.23 General For Sale 23 of 23
PIPPER::GEORGE 116 lines 8-OCT-1991 11:09
-< List of Car Magazines >-
--------------------------------------------------------------------------------
Finally got a chance to go thru the magazines listed in the last
note (7.22).......and this be them!!! Let me know if you're
interested.
Steve George DTN 232-2247 or at the above node!
Old Car Magazines
HOT ROD - Aug.'60, April '61, July '61, Sept.'61, July '63, June '66, June '68
July '68, Oct. '68, Dec. '68, May '69, June '69, July '69, Aug. '69
MOTOR TREND - Mar. 61, April 61, July 61, Sept. 61, Oct. 61, Nov. 61, Dec. 61
June 62, Feb. 65, May 65, Oct. 68, April 69, June 69, June 69, July 69
Aug. 69
SUPER STOCK - Nov. 64, June 68, July 68, Aug. 68, Sept. 68, Oct. 68, Aug. 69
CAR LIFE - Feb. 61, Jan. 62, Mar. 62, May 68, June 68, July 68, Aug. 68,
Sept. 68, Nov. 68, April 69
CAR CRAFT - Nov. 61, July 65, May 68, Aug. 68, Sept. 69
CARS - Aug. 60, Oct. 60, Jan. 62, Mar. 65, Oct. 66, Feb. 67, Aug. 68, Sept. 69
CAR & DRIVER - May 68, June 68, July 68
POPULAR HOT ROD. - Oct. 63, June 69, Sept. 69
MOTOR LIFE - Mar. 60, April 60, June 60, June 61, Sept. 61, Nov. 61
ROAD & TRACK - Mar. 63, Aug. 63, June 68, July 68, Sept. 68, June 69
SPORTS CAR Graphic - Mar. 63, May 68, Feb. 69, June 69, Mar. 70
ROAD TEST - June 68, Oct. 68, Aug. 69
MOTORCADE - Nov/Dec 64, May 68
AUTO YEARBOOK True Mag. - 1960
1961 AUTOSHOW Mag. -1961
SPEED MECHANICS - May 63
CUSTOM CRAFT - June 65
DRAG CARTOONS - Sept. 65
SPEED & SUPERCAR - June 68
AUTOPICS - Oct. 68
HI-PERF. STOCKERS - Sept. 68
DRAG NEWS - July 6 & 13 '68
|
| 7.24 | For Sale Car lifts | BOLT::CAMPBELL | | Mon Oct 14 1991 14:33 | 19 |
| For Sale:
1: Mechanical Car lift, powered by a 110/220V Electric motor.
$600
********************************************************************************
2: Hydraulic car lifts 2:8' long x approx 12" dia pistons(heavy duty)
2: sets of valve controls for above
1: Hydraulic tank full of oil approx 5' high x 24" dia.
All Hydraulic stuff $600
********************************************************************************
Contact:
Steve Campbell
223-0759
BOLT::CAMPBELL
|
| 7.25 | MIG Welders for sale | BOLT::CAMPBELL | | Mon Oct 14 1991 15:04 | 22 |
| For Sale:Welders and Acc.
1: Linde SVI 500 DC power supply with spot welding timer and
automated voltage adjuster.
1: 25lb spool MIG wire feeder(linde)
4: MIG torches of different configurations for above
3: Airco spool guns in a basket
1: beam welder(Linde)
-10' I beam
-Control box
-torch
-25lb wire feeder
IF interested contact:
Steve Campbell
223-0759
BOLT::CAMPBELL
|
| 7.26 | Rebuilt Ford 429CID | VCSESU::D_SMITH | | Tue Oct 29 1991 07:02 | 24 |
| David Smith
DTN:297-1290 (don't call)
VCSESU::D_SMITH
*** FORD 429 CID ENGINE FOR SALE ***
All machine work, parts and assembly performed by Competition Enterprises.
Balanced and blueprinterd 429CID bored .030, forged 9.8:1 pistons.
Crank machined .010/.010 & stroke corrected. Rods, crank end resized
w/ moly bolts...small end floated to pistons w/ moly rings. Solid
lifter 270/.540" camshaft w/ roller rockers, hardened pushrods.
Cyl. heads surfaced, bronze guides, oversized intake/exhaust valves, HI-
PO three angle valve job. Dual springs w/ moly retainers and teflon seals.
High volume oil pump with deep sump chrome pan. Double roller timing chain.
Aluminum intake with 780 CFM vacumm 2ndaries. Dual point distributor.
Engine has never been started. Strong 4 x 4 engine or dragger w/ cam
change. Can be seen in Marlboro, MA.
$4500 or BO. (508)481-7981 after 6:00PM.
|
| 7.27 | Interested in 1970 Mach 1 | COMET::TAYLORB | | Sat Nov 23 1991 13:32 | 6 |
| I would be interested in some of the magazines if they include
literatue on 1970 Mach 1's. Look through them and see if there
is any sections on test reports, options, price listings, and
performance resuslts. I have no idea on what they are worth
but if the price is right we will work something out. Send mail
to COMET::TAYLORB
|
| 7.28 | another man's junk... | TILTS::VANDERPOT | | Tue Dec 17 1991 17:19 | 9 |
|
there is a 67 ranchero on the side of the
road here in Phoenix. no rot. 390 with an automatic.
asking 2000
looks extremely original, and extremely unrestored :-)
|
| 7.29 | come and get em or I'll trash em! | WMOIS::DENINE_V | | Sat Jan 04 1992 17:38 | 17 |
| All of the folowing items MUST GO!So if you are in the area and are
interested make me an offer.I would like to see it all go as a package
but you know how well that works.
1970 350 small block and crank(these I will only sell together)
492 casting# heads I have 875.00 in these heads I have the reciept
make an offer.
Edelbrock torker intake and torkerII camshaft both still in box.
comp cams roller rockers and push rods still in box.This combo with
10.25 to 1 pistons is supposed to be able to produce 400 to 420hp
so if you want to build a cheap little sling shot don't miss out
on this.Also have a rebuilt 4 gear out of a 1980 Z-28.Again If you are
interested dont be affraid to make an offer. I have to many projects
going this must go.I need the cash. I can be reached by calling me at
(508-632-7209)or send mail to wmois_Denine.
I also have two sets of big block chevy heads 454 I will sell them for
$40.00 if you come and get them.
|
| 7.36 | Chev hubs for sale | JUNCO::DBARTON | | Mon Jan 20 1992 08:58 | 7 |
| Chev hubs for 14" or 15" rim
These are the Chev rally hubs (old style) aluminum rather than plastic
They go for $43 a piece new
Asking $100 for the four
Dave Barton
dtn 225-5319
scoman::dbarton
|
| 7.30 | GM parts for sale | ESKIMO::MANUELE | | Mon Mar 30 1992 02:41 | 63 |
| John Manuele
ESKIMO::MANUELE
DTN 568-5216 (3rd shift)
My cousin was going to restore the following Grand Prix but is
currently undergoing a messy divorce. As the parts are stored in my
garage and I need the space for my project, they have to go. The car is
in Saugus Ma, parts in Malden Ma. Help me clean my garage!
1970 Pontiac Grand Prix model J. 400 cid 4bbl, turbo 400, 10 bolt posi.
Car is in OK condition, needs body work, no frame rot but some body
rust/dents. The car is complete and did run when taken off the road 2
years ago. In addition, the following parts were purchased for the
restoration, mostly from a rust free southern car...
Part Condition
Hood, 69-70 GP (2) Very Good
L and R front fenders, 69-72 Very Good
Front bumper and grills 69-72 Very Good
Headlight panels 2 left 2 right 69-70 Good
Left door, complete 69-72 Good
Right door skin 69-72 New
Trunk Lid 69-70 Very Good
Rear valance panel 69-70 Very Good
Black bucket seats 69-72 fit other GM cars Very Good
L and R quarter panel extensions w side markers, 69-70 Very Good
3 wheel well chromes 69-72 Very Good
1 rocker panel chrome 69-72 Very Good
2 fender louver chrome pieces 70 Very Good
L and R door window seals 69-72 New
Center consoles, 1 blue, 1 green 69-72 Very Good
1 floor shifter 69-72 Fair
other assorted parts.
Price for the car alone, $700.00/BO for the car and all parts,
$1400.00/BO will sell parts seperate.
In addition the following parts are also for sale seperate
Chevy 12-bolt posi rear, out of a 70 Monte Carlo SS, will fit..
70-72 Monte Carlo
69-72 Grand Prix
68-72 Chevelle
68-72 Skylark/GS
68-72 Cutlass/442
68-72 Lemans/GTO
Rear end is complete with sway bar and heavy duty boxed lower control
arms, I think its a 3.55, but am not sure. Great condition. $400.00 BO
2 14"x6" Rally 2 rims fair condition, $20.00 each, $35.00 pair
4 Pontiac Motor Division Spinner center caps, for Rally 1 mags,
excellent condition. Rare $100.00 BO
3 14" trim rings $5.00 each
1 Lemans air cleaner (Pontiac) $25.00
1 Rochester Q-Jet carb for a Pontiac 400, needs rebuild $35.00
1 heavy duty four core radiator from a Pontiac Lemans w auto trans,
good cond. $50.00
1 pair heavy duty rear coil springs, fit GP and many others, new,
$50.00
1 Edelbrock Performer intake for a Pontiac 350, 400 455, recently bead
blasted. $75.00
1 Lemans instrument panel w guages and tach, fits 70-72 Lemans and GTO,
wood grain. Good cond. $50.00
All prices are negot, send me e-mail with any questions.
|
| 7.32 | | SOLVIT::THOMS | Ross 285-3151 | Tue May 26 1992 07:41 | 17 |
| <<< Note 7.31 by SOLVIT::THOMS "Ross 285-3151" >>>
-< Car & Driver magazine set, 1965-1972 >-
Ross Thoms
Solvit::Thoms
285-3151
1965-1972 Car & Driver set. Great reviews and head to head competitions,
excellent muscle car color ads, etc. Read about the 1966 426 hemi Charger
or a comparison review of 428 Ford/Merc, 400 Pontiac, 401 Buick, and 442 Olds.
A lit of excellent reading material and pictures. Will sell the set of 80+ for
$2/issue or if no interest, will sell on an individual basis.
*******************************************************************************
* Since no interest in entire collection, I will sell individual issues. Lots
of muscle car tests and reviews, (426 hemi, 428 Fords, 400 Pontiac), plus
a few head to head comparisons. Write for individual pricing.
|
| 7.34 | 1978 Mustang Cobra II | VICKI::REED | | Fri Jun 05 1992 10:00 | 21 |
| John F. Reed
DTN - 285-2973
Email - vicki::reed
Location NIO Salem NH
For Sale
1978 Mustang Cobra II
This car is being prepared for SCCA competition. It has
a small block (302 cid) engine, top loader four speed
transmission, heavy duty 9" rear end with factory disc
brakes, aluminum slotted mags, new radial tires and new
exhaust. The interior has been modified for competition
with factory tachometer and gauges. The body is rust
free. This car runs and drives and is road worthy as it
sits. Additional spare parts include a 1972 302 cid
engine, C-6 automatic transmission with drive shaft and
some body and interior parts. $1500 or best offer.
|
| 7.35 | Big weenies for sale | MVDS02::READIO | A Smith & Wesson beats four aces, Tow trucks beat Chapman Locks | Fri Jun 19 1992 10:40 | 19 |
| Skip Readio
264-5118
MVDS02::Readio
I have a pair of 60 series 15" Dunlop GT Qualifiers I pulled off the back
of my '34 when I had the rear axle tube straightened.
One of the tires has the inside tread half worn (because of the bent axle
tube) but the rest of the tire, as well as the other tire, are nearly new.
They were mounted on 8 1/2" rims so the centers aren't all worn away.
They're the equivalent of L-60 so what's that? 265 or 275? They're
buried in the back of the garage. Anyone interested in them? I'll let
'em go pretty cheap.
skip
|
| 7.37 | Quick little GMC | SOLVIT::THOMS | Ross 285-3151 | Thu Jul 09 1992 09:17 | 11 |
| Ross Thoms
Solvit::Thoms
285-3151
1984 GMC S-15 powered by a Chevy 350, turbo 350 transmission, B&M floor shifter.
Corvette rally wheels, headers, dual exhaust. Nice setup, sharp looking truck!
Needs: has bent front bumper, a limited amount of surface rust and it looks like
bad rings in one cylinder.
Great project vehicle $1500
|
| 7.38 | Holley carb and Stubstack | ASABET::HAMEL | | Thu Jul 23 1992 07:27 | 14 |
|
Holley 600 cfm, vacuum secondary, single feed, universal carb.
Was running when taken off car. May need power valve. $50.
K&N Stubstack fits Holley carb. Sells for $25. new. Will let
go for $10.
Mark Hamel
dtn 223-6336
ASABET::HAMEL
|
| 7.39 | 66 BUICK 340 ENGINE/PARTS | CSLALL::BSKINNER | | Mon Aug 17 1992 14:54 | 18 |
| For Sale:
1966 Buick Skylark 340 engine complete, some parts new, needs new
pistons and boring out.. For sale whole or for parts.
340 4 barrel intake manifold
300 or 340 rebuilt heads complete with exhaust manifolds.
New crank .010 under
2 Speed switch pitch tranny (needs to be rebuilt)
A few other misc parts. Make me an offer...
Brian Skinner
275-2562
CSLALL::BSKINNER
|
| 7.40 | 1980 Z28 BBC | MIMS::MACIOLEK_M | I went to UCLA - for Lunch | Wed Sep 02 1992 19:26 | 15 |
| For Sale: (hold onto your hat Phil :*()
1980 Chevy Z28
'79 454
Comp Cam 280 cam, edlebrock performer manifold, chrome accessories,
Hooker Supercomp Headers, full 2 1/2 exhaust from collector to
tail pipes, holley electric fuel pump, mallory firebox/hei distributor,
4.11 rear, TCI TH-350 trans, holley 780.
Custom laquer paint, pearl blue, red, purple fogged in, T-Tops,
P/W P/L, Tilt, AM/FM Cass (can barly hear when car is running :*))
Garaged 8 years, 10K miles in past 4 (not on this motor though).
Aluminu wheels w/goodyear VR60 15X7. Nice car. $7000 OBO
Mike in Atlanta
DTN 343-0317
|
| 7.43 | 1990 Ford 5.0 HO Engine For Sale | LV2FSH::ADDEO | Rocco Addeo | Mon Sep 28 1992 08:11 | 28 |
|
Rocco Addeo
DTN 297-9869
LV2FSH::ADDEO
*** FOR SALE *** FOR SALE *** FOR SALE *** FOR SALE
1990 Ford 5.0 HO Fuel Injected engine.
This engine is a complete "pull-out" including computer and harness.
It has exactly 17,105 miles on it and was purchased in Texas.
It came out of a 1990 Mustang GT which was rear ended (I have a picture)
has had a 3 angle valve job and the heads have been ported.
I was going to put it into a Cobra kit car for show purposes but I relocated
and plans fell apart. The engine is in show condition and has been painted
gloss black and pollished where possible.
It's located in Upton, Mass.
PRICE = $1975.00 or BRO
|
| 7.44 | TH400 Speedometer Parts | CUJO::BROWN | Dave Brown | Mon Nov 30 1992 20:46 | 14 |
|
I've just completed re-gearing my speedometer in my Firebird (not a
job I'd want to do every day...) and have the following TH400 speedometer
parts available for anyone else who would want to tackle a job like this
and would need gears such as these:
- 20 tooth drive gear
- 36 tooth driven gear
- 36-39 tooth driven gear sleeve
Dave
|
| 7.45 | SM chevy Roller rockers | DESERT::WOYAK | | Thu Jan 14 1993 08:30 | 6 |
| Have a set of Crane 1.6 roller rockers..These are new and never used.
(to close clearance issues so I went with 1.5's) for small chevy.
Asking 170$
Reply to DESERT::WOYAK
|
| 7.46 | Some misc. stuff for sale... | LUNER::YOUNG | where is this place in space??? | Mon Jan 25 1993 11:11 | 13 |
|
FOR SALE
Engine stand in mint condition. 750LB capacity. Roll around casters
and rotating fixture plate. Perfect for building any motor. $75
'Year One' Spoiler for 67-69 Camaro/Firebird. Heavy duty fiberglass
construction with built in mounting hardware. Quality contruction from
Year One. $75
Drop a note to LUNER::YOUNG...i work at MLO and live near Worcester.
|
| 7.47 | Crossposted in Carbuffs and Classifieds | ESKIMO::MANUELE | | Wed Mar 03 1993 14:50 | 27 |
| <<< IESE::IESE$DUA0:[NOTES$LIBRARY]CLASSIFIED_ADS.NOTE;10109 >>>
-< Welcome to C_A, Please READ THE RULES in Note 2.* >-
================================================================================
Note 5.341 The Official VEHICLE Topic 341 of 341
ESKIMO::MANUELE 20 lines 3-MAR-1993 16:33
-< '69 T-bird and '70 Grand Prix parts. >-
--------------------------------------------------------------------------------
John Manuele
ESKIMO::Manuele
DTN 225-5215
Home (617) 324-0478 best to call between 9:00am and 1:30pm.
Car/parts are located in Malden Ma, 10 minutes north of Boston.
1969 Ford Thunderbird parts car. No motor or transmission. Many good
parts for sale. 4-door. Excellent black interior. Good doors, chrome
grill, tailights, trunk lid, fenders, hood etc. Will sell complete or
part out.
Also 1970 Pontiac Grand Prix parts for sale. Good hoods (2) doors,
front and rear bumpers, grill, valance panel, black bucket seats and 2
center consoles, new rear coil springs, Edelbrock Performer intake
manifold. Many small trim parts.
All parts are best offer, I need to clean my garage ASAP to work on my
project car. Call at home for more details, or send E-mail.
John M.
|
| 7.48 | '69 Camaro Assem/Wiring Specs | STRATA::BERNIER | | Wed Apr 07 1993 08:39 | 13 |
|
Andy Bernier
HLO1-1/R06
DTN: 225-7076
SCOMAN::BERNIER
Assembly manual and wiring diagrams for 1969
Camaro including RS and SS. This is a lot of
information in a 2" binder. A real necessity
for restoration.
$25.00
|
| 7.49 | Last chance for T-Bird and Gran Prix parts. | ESKIMO::MANUELE | | Wed May 12 1993 15:53 | 28 |
|
--------------------------------------------------------------------------------
John Manuele
ESKIMO::Manuele
DTN 225-5215
Home (617) 324-0478 best to call between 9:00am and 1:30pm.
Last chance for any of these parts. Anything left by Memorial Day
goes to the junkyard.
Car/parts are located in Malden Ma, 10 minutes north of Boston.
1969 Ford Thunderbird parts car. No motor or transmission. Many good
parts for sale. 4-door. Excellent black interior. Good doors, chrome
grill, tailights, trunk lid, fenders, hood, 4 P215-75R15 Michelin X
white-wall radials, glass, original radio etc.
Will sell complete or part out.
Also 1970 Pontiac Grand Prix parts for sale. Good hoods (2) doors,
front and rear bumpers, grill, valance panel, black bucket seats and 2
center consoles, new rear coil springs, Edelbrock Performer intake
manifold, exhaust manifolds, 2 14" x 6" Rally II rims with old
bias-belted thin white-walls. Many small trim parts.
All parts are best offer, I need to clean my garage ASAP to work on my
project car. Call at home for more details, or send E-mail.
John M.
|
| 7.50 | Vette wheels and tires | SWAM2::WOYAK_JI | | Mon May 17 1993 16:42 | 11 |
| for sale,,tires amd wheels...for 1993 vette..set of 4 "Chromed factory
rims" with 285/40zr-17 GSC tires..These are new...asking 800$ the set
and you pay shipping...
contact
SWAM2::woyak_JI
Thanks
Jim
|
| 7.51 | | WMOIS::DENINE_V | | Tue Jul 06 1993 16:53 | 3 |
| FOR SALE OLD MASS LIC PLATES MOST ARE MATCHING SETS AND IN GREAT
CONDITION.HAVE MANY,MUCHO MANY FROM 1920'S TO 1966
|
| 7.53 | Ford Intake | COMET::RENVILLE | | Wed Jan 19 1994 20:23 | 17 |
| Jason Renville
Dtn: 548-3152
Home: (719)390-7486<------ I work second shift so feel free to call my home
Comet::Renville<----- Or just drop me a line.
CXO1***Colorado Springs
Weiand single plane Intake Manifold Non-EGR
Fits 289-302 Ford V-8 Accepts Holley square 4bbl or equiv.
Approx $135 new. Asking....$65 +shiping if needed.
Just don't have a 302 anymore.
|
| 7.54 | Goodyear 255/50/16 tires | SOLVIT::THOMS | Ross 285-3151 | Tue Mar 29 1994 14:11 | 8 |
| Ross thoms
solvit::thoms
285-3151
(2) Goodyear 255/50/16 non-gatorback tires, worn, but legal tread.
Make offer!
|
| 7.57 | Magnum 500s | MYCUDA::COE | 440 Rotates the Earth | Mon Apr 11 1994 06:43 | 12 |
| Steve Coe
DTN 293-5408
MYCUDA::COE
Complete set of 14" Magnum 500 Wheels with
4 P245/R14 Road Hugger Radials (RWL).
Set includes lugnuts (10 Right hand thread and 10 Left hand thread).
$200 or best offer.
/steve
|
| 7.60 | 383 mopar / 455 buick tunnel ram w/2-600 holley carbs | BSS::BOREN | | Mon May 09 1994 11:57 | 20 |
| Subj: tunnel ram and twin 600 holley's (383Mopar) or (455 Buick)
I have made a few changes and have decided not to use the tunnel ram on
the challenger (this is a tall Weiand) - so if someone out there is
looking and has a 383 or 455(buick)..... [There is an adapter that
allows this unit to go on the buick 455, and w/o the plate mates to the
383]. I know it sounds strange, but Weiand made a special adapter that
allows the tunnel to bolt onto the 455.
It comes with two holley 600's, I one rebuilt already, the other needs
a kit, and the package includes the linkage bars that drop off the
carb's.
$325 - obro
rich boren
--dtn -592-4689
--bss::boren <---------
|
| 7.61 | Camaro and T/A parts. | STRATA::MANUELE | | Tue Jun 07 1994 21:27 | 22 |
| Crossposted in Carbuffs and Classifieds.
--------------------------------------------------------------------------------
John Manuele Parts are in Malden Ma, or I can
SCOMAN::MANUELE bring them to Hudson (HLO) if
DTN 568-5215 (2nd Shift) so desired.
Home (617) 324-0478
4 1986 Chevrolet IROC-Z mag wheels. 16" 5-spoke factory rims, Gold and
aluminum color scheme, great condition. Front rims have 245-45-ZR16
Dunlop D-40's and rears have 245-50-VR16, in good condition. $400.00/BO
for the whole set.
1978 Trans Am steering wheel, black three spoke design. Also used on
70-81 T/A's and Firebirds, as well as some GTO's and other Pontiac
performance cars. Good condition, with the steering column and horn
extentions. Has the screaming Pheonix horn button. $50.00/BO
1986 Camaro GM Shop Manual $10.00
K & N air filters for 85-92 Chevy Camaro IROC or Z-28 with the TPI 305
or 350 engine. Great condition, $20:00/BO.
|
| 7.62 | Misc Items For Sale | ELWOOD::JOHNSON | | Thu Jun 09 1994 19:27 | 21 |
| Tim Johnson
Elwood::Johnson (Preferred)
SHR1-4/D26
DTN: 237-3336 (Do not use)
Small Block Mopar (318-360) Cast Iron Intake $20.00
with Thermoquad in unknown condition.
Miscellaneous 40 Ford Parts
Pickup Running Board, quite solid. $60.00
Front Spring, new. $50.00
NOS Front Axle Bolts (pair) $25.00
Truck Hood, has surface rust. $30.00
NOS Hood Release Handle. $15.00
|
| 7.63 | Misc Parts | MUZICK::MAGERS | Nancy Magers, TAY2 System Management | Fri Jun 24 1994 09:52 | 23 |
| Nancy Magers
MUZICK::MAGERS
227-3512
Parts for 70-72 Chevelle
2 New Fiberglas fenders (left and right) $200
(My husband decided to use patch panels on the existing
fenders rather than switching to the Fiberglas ones.)
Left and right door windows for hardtop $20
Passenger side headlight assembly (eyebrow panel) $20
New Coil Springs for ElCamino (heavy duty) $50
Front interior pillar posts $10
Miscellaneous Parts
4 14x8 Aluminum Mag Wheels for Ford or Dodge turban style. $175
|
| 7.64 | FLEX FAN!! | CXCAD::C_WILLIAMS | Hammer | Tue Jul 05 1994 09:13 | 16 |
|
FLEX-A-LITE 1300 Series Flex Fan
Part Number FLX-1319
Safety rated to 10,000 rpm
19" diameter
6 blades
with: 2" spacer kit, fits 5/8" and 3/4" fan pilot
Both were used for ~100 miles
$30 + shipping from Colorado
Carl Williams
CXO1-1E
DTN: 522-3019
|
| 7.65 | V rated Tires Cheap | ELWOOD::DIMASCIO | | Wed Jul 06 1994 12:28 | 12 |
| 2 used 245/50-VR16 Remington Tires(Made by Dunlop)
Still good tread left(I guestimate 10k worth)
$50.00 for the pair,
contact:
Rich DiMascio
home 508-537-8390
days dtn 237-3387
elwood::dimascio
|
| 7.66 | 1992 GMC TYPHOON Jimmy | STOWOA::MARCOCCIO | | Sat Aug 13 1994 13:39 | 50 |
|
Lou Marcoccio
DTN 276-9717
STOWOA::MARCOCCIO or Lou Marcoccio @OGO
May Be Seen By Appointment
Stow, MA (2.5 miles from RT 117 and 495)
1992 GMC TYPHOON JIMMY FOR SALE
This is an every-day use Blazer-like vehicle that provides alot of carrying
capacity, ultra enthusiast performance, and is built and serviced by GMC (your
local GMC truck dealer). It has been hailed by Motor Trend and Car and Driver
as "the Porsche of Sport Utilities" and "the Sport Utility that outperforms
the new Corvette". It provides exceptional enthusiast performance in dry, wet,
and snow conditions, provides all the utility of a great sport utility (e.g.
large cargo carrying, room for 4-5 adults, fold-down tailgate, carries 3-4 bi-
cycles inside), plus exceptional traction in 18 inches of snow. This is the
first vehicle sold anywhere in the world that provides:
1) Exceptional Corvette-beating performance
2) Performs fearlessly in ice/snow
3) Provides family room/space
4) Ultra luxury appointments
5) Small size (easy to park, drive, and has very small turning radius)
6) Provides higher-up view and high safety of a full frame structure
The DuPont Registry has identified this model as one of the 10 best U.S.
built collectables. The vehicle is entirely stock (as purchased from GMC
dealer), and only has 38K Miles. It looks and runs like new (needs nothing),
and is regularly serviced at a GMC dealer (documentation). Adult Owned.
Features:
- 285 HP High Performance Engine (high torque at all rpm levels)
- High Performance Automatic (w/overdrive) Transmission (same as Corvette)
- High Performance ALL-WHEEL DRIVE (full time)
- Positraction w/Viscous Couplings to Wheels and Front/Rear Axles
- Deluxe Leather Interior
- All Power (windows, doors, mirrors, steering)
- Deluxe Sun Roof
- Air Conditioning
- High Performance Suspension, Wheels, and Tires
- Oil Cooler
- Fog Lights and Ground Effects
- Stereo w/Cassette
Price New: $30,860
Asking: $18,900 (well below current retail - "Ward Used Car Prices")
|
| 7.67 | Automobile sunroof 4-sale | JUPITR::JCROSBIE | | Sat Aug 20 1994 21:03 | 10 |
| Automobile sunroof for sale.
Black frame with tinted glass.
Asking $50.00
Please send mail to make arrangements to meet.
JUPITR::JCROSBIE
DTN 237-2653
|
| 7.69 | 9x28.5x15 Firestone SLICKS | BSS::BOREN | | Mon Aug 29 1994 12:45 | 11 |
| rich boren
cxo3
dtn:592-4689
bss::boren <----
2ea 9.00 x 28.5 x Firestone slicks w/50% life left....includes tubes
$150.00 plus shipping if required
|
| 7.70 | VW Musclecar: '88 Scirocco | SOLVIT::TTHOMPSON | | Wed Sep 14 1994 08:13 | 19 |
| Tad Thompson
DTN: 264-6253
SOLVIT::TTHOMPSON
1988 VW Scirocco - Last Issue of the VW Musclecar
=================================================
A real head-turner: bright red, aluminum sport wheels,
spoiler, sun roof. Inside: black leather and power
everything - PS/PB/PW/PDL, AM/FM cassette, A/C, etc.
16V-4cyl high-output engine, 5-speed, new low profile
performance tires. Only 59K miles, and in overall
excellent mechanical condition.
This very sporty car is priced to sell quickly at: $5,800.
Car can be seen at my home in Milford, NH, by appointment.
|
| 7.71 | updated | TAPE::LKL | Void where prohibited | Thu Sep 29 1994 09:42 | 29 |
|
Contact me at home: 508-779-0282
Set of four -- 4 lug/ 14" Crager SS wheels with blue center caps
Stuff from my 67 mustang convertible parts car.....
=====================================================
Front Fenders
Grill w/horse and corral
Blue steering wheel
Black back bench sear (deluxe)
Instrument bezel
Gas cap
door handles
hood
AM/FM radio with cassette
black glove box
black ashtray
Stuff from my 68 mustang convertible....
=====================================================
Blue interior rear quarter trim
Repro gas cap (I found an original)
blue arm pads (one is in decnet shape, one has a rip)
front bumper guards
that's all I can think of now. My list is at home.
|
| 7.72 | Mustang parts 4 sale | JUPITR::JCROSBIE | | Sat Oct 01 1994 18:17 | 13 |
| The following are parts that I bought for my '88 Mustang GT, I am
selling the car in the spring, but these parts are not going with
the car.
K & N Air Filter (with the cleaning kit) $35.00
Accel Super Coil $35.00
Hypertech Power Module (stage 3 chip) $140.00
Hypertech Power Pulleys (underdrive pulleys) $70.00
GTS Blackout Covers (for headlights,taillights, and foglights) $75.00
I live in Oxford and work at SHR, I am willing to drive to meet you.
Home phone ----> (508)987-0493 please leave a message.
DTN ----> 237-2653
|
| 7.73 | 1990 Ford 5.0L High Output Engine | BUSY::CLEMENT | Smells like Nirvana | Fri Nov 04 1994 10:15 | 28 |
| Mark Clement
DTN 297-8489 (MRO1)
BUSY::Clement <-- preferred
For Sale: 1990 Ford 5.0L High Output Engine
- This engine is in showroom condition. It was to be put in a show car. It
has had a 3 angle valve job. The entire engine is gloss black and the
accessories have been polished. Real nice engine....Located in Upton
MA.
- Complete Pullout (from Texas Mustang GT) includes...
- Computer
- Harness
- Air filter housing and tubes
- Stock headers
- Engine mounts
- All accessories (P/S, air pump, alternator, fan)
- All screws and bolts
- Service manual
- Price: $1750.00/bo
For more info send mail to Rocco Addeo @
US4RMC::"[email protected]"
|
| 7.74 | HOLLEY 600 CFM carb. for sale | HOTLNE::MALESKY | | Wed Feb 01 1995 06:03 | 14 |
| John Malesky
HOTLNE::MALESKY
DTN 225-5110
HOME (508)832-2984
Auburn,Mass.
FOR SALE:
600 CFM
HOLLEY # 84012 dual feed double pump carb.
Mechanical secondaries, hand choke assy.
New style, like new, works perfect....
$150.00 or swap for a HOLLEY or EDELBROCK
Performer 600 CFM carb w/vacuum secondaries.
|
| 7.75 | 67 Camaro nose | 5590::HIGGINS | | Wed Feb 01 1995 10:55 | 10 |
|
67 Camaro nose
Texas car - very good condition except drivers fender has small dent
Price - $450 or best offer
Also have a fiberglass hood for same with an L-88 style scoop
$50
Contact Mark Higgins
evenings in Maynard, MA 508-897-8754
|
| 7.76 | '69 Camaro Convertible | RANGER::PALMER | | Tue Mar 28 1995 08:42 | 17 |
|
NAME: Dick Palmer
DTN: 226-6875
NODE: RANGER::PALMER
'69 Camaro Convertible
- New motor
- New tires
- New top
Needs finish work. This would make a great project car.
Located in Framingham, Ma.
Asking $3000 or best offer.
Please don't contact me directly. Call my brother Bruce
at 508-879-9536
|
| 7.77 | 327" Chevy Motor | RANGER::PALMER | | Tue Mar 28 1995 08:43 | 16 |
|
NAME: Dick Palmer
DTN: 226-6875
NODE: RANGER::PALMER
327 cu. in Chevy engine
Totally rebuilt with oversize pistons
Zero miles
Short block 2 bolt main motor
Located in Framingham, Ma.
Asking $1000 or best offer.
Please don't contact me directly. Call my brother Bruce
at 508-879-9536
|
| 7.79 | `63 Plymouth w/ 440 and posi | STRATA::WILCOX | | Fri Apr 14 1995 08:48 | 5 |
| I own a `63 Plymouth Belvedere with a Chrysler 440 and torque-flite
tranny. The car is very solid and for sale, or I'll part it out.
The rear-end is a 3.73 (?),smooth (baby moon) pumpkin, I know it's
posi.
Peter The car is in Maine, I'm in Mass.
|
| 7.80 | Parts for sale | PULMAN::BERGER_P | | Mon Apr 24 1995 11:20 | 24 |
|
Holley #4781, 850 double pumper with 2" spacer and chrome fuel line.
Very good condition.
$175.
Barry Grant Fuel System, BG400 pump with BG fuel filter. Includes
pump to filter adapter and mounting bracket. Pump is used in good
condition. Filter, adapter and bracket are all new.
$250.
ACD Air shifter box for a magneto. Box only! New never used.
$125.
Phil Berger
DTN 223-2626
Railrd::berger_p
|
| 7.81 | For Sale Stuff | MTWASH::GRAY_T | | Thu May 25 1995 17:20 | 20 |
| 5.0 fuel injected Mustang parts
These are not my parts. Call Harry, home (603)335-3319 business
(603)358-6930 he lives and works in Keene,N.H.
70hp nitrous kit with remote valve bottle opener $300
Hartman intake $??.??
he also is selling a fiberglass hood, turbo style
stock ported heads $350
B303 cam $??.??
1:6 rocker arms, blue aluminum motorsports.
I have a stock GT spoiler $50 (603)485-4092
There should be more used items going up for sale over the summer, so
if you live near Keene,N.H. you might want to keep in touch with Stan
Pearson at Modern Performance (603)835-2512
Travis
|
| 7.82 | 72 Buick Skylark | NOKNOK::HIGGINS | | Thu Jun 01 1995 11:22 | 16 |
| Mark Higgins
DTN 223-2761 <-don't use
email NOKNOK::HIGGINS <-use
home 508-897-8754
FOR SALE -
72 Buick Skylark 350 model - 350 with factory 4bbl, console auto,
buckets, ac, ps, pb. This is from North Carolina 2 years ago - not
your typical rusty northern auto! Has 124k miles on it but don't let
that scare you because I have another one with 165k miles and it just
won't quit. The car is brown (new paint) with a black vinyl top and
brown interior. I didn't drive it all of last year (that happens when
you have 10 cars!). It has the sport wheels but could use new rubber.
Looking to get $2400 - will trade for interesting pre-73 car of equal/
less value.
|
| 7.83 | Quarter Jr. Drag Racing Software | VMSNET::M_MACIOLEK | Four54 Camaro/Only way to fly | Wed Jun 21 1995 09:56 | 12 |
| Mike Maciolek
(706) 216-1589
VMSNET::M_MACIOLEK
For Sale:
Quarter Jr. Drag Racing software. ET prediction.
Version 2.02, manual
$40.00
Regards,
MadMike
|
| 7.84 | Chevy Test Pilot | POLAR::GROSE | | Tue Jul 18 1995 19:50 | 8 |
|
Jason Grose
(613) 591-4242
Olds Turbo 400 with shift kit for sale. No stall.
Asking $125
Will trade for SBC parts
|
| 7.86 | 91 mustang ang perf.parts | MTWASH::GRAY_T | | Wed Aug 02 1995 16:35 | 32 |
| Travis Gray
Home Phone(603)485-4092
Selling Mustang and Parts
Vortech supercharger recently upgraded to a B-Trim, two sets of pulleys
$2100
Ram Air, kind of rough, sells for $170 new, I'll take $65, comes with
the scoop that mounts under your mustang, hose and reusable cone shaped
filter.
MSD 6AL ignition with a never used Blaster 3 coil $140
91 Mustang LX 5.0, Emerald Green, AC,PW,PL,Airbag,Factory sunroof,power
lumbar,cruise,automatic with O.D. and a B&M shift kit,trans cooler,3:73
gears in the rear with an Auburn diff.,155 liter fuel pump, new 245\45
BF Goodrich VR rated tires mounted on factory 16" five star rims. This
car is very clean throughout, super shape, selling for $8390, 0r 10,500
with everything listed above. Ohh yeahh....it also has a full 2 1/2"
exhaust,including an H-Pipe, Dynomax mufflers, and mandrel bent
tailpipes with a stainless steel coating on the ends.
I also forgot to add in my never used subframe connectors, the kind
that are like this:
I
I
I
IIIIIII
I
I
I To support under your seats as well,$80.
I
|
| 7.87 | aaarrrrrgggggeeee | MTWASH::GRAY_T | | Wed Aug 02 1995 16:38 | 4 |
| add to note .86 fuel and boost gauges by AutoMeter,not liquid filled,
$30 each or both for $55
Travis
|
| 7.88 | dodge charger generaql parts for sale | USOPS::CHALIFOUX | | Mon Aug 07 1995 11:51 | 10 |
| I am putting my adds everywhere. If I bum you out with this.,..sorry, I
am however trying to get my old Charger out of my wifes flower bed. I
am selling my 66 dodge charger (parts of complete)....a song and a
dance will take the whole thing...or part me to death...your choice. I
have lots of parts....so come and get em...
Gary Chalifoux dtn 297-5781 or usops::chalifoux.
Home (508)987-5946
|
| 7.90 | eh? | VMSNET::M_MACIOLEK | Four54 Camaro/Only way to fly | Tue Aug 29 1995 10:58 | 14 |
| What year car? Are they factory or aftermarket? I'm just wondering.
Chevrolet sells the style I have for $1000/pair (supposedly).
I have a 1980, factory installed T-Tops. My pop priced the glass at
the local chevy dealer once and told me the above price. Fortunantly
I don't need a pair.
Have you called a "parts recycler"? (aka junk yard) and asked if they
could use them? They sound like they'd be a hot item to someone who
deals parts. Your market in here is probably REAL limited (buncha
dam ford owners in here I'll tell ya).
Regards,
MadMike
|
| 7.91 | Unique car for sale | JUMP4::JOY | Perception is reality | Mon Mar 25 1996 10:54 | 21 |
| For Sale:
1977 Camaro Z-28 Arizona car, never driven in the snow. 90% original,
looks like new. Recently painted. No rust. New headliner, front seat
covers, all else original. A limited number of these cars were built
and very few exist with this much original content. 350 cu.in., V-8, 4
barrel standard engine. Automatic trans. AC. Silver with white/black
interior. No extra chrome. Looks like when I drove it off the lot.
Definitely a show car, runs like new. ~80K miles.
Unique opportunity for the right buyer. I can't maintain it in the way
it should be maintained so I am hoping to sell to someone who will
"pamper" it.
$9000. Can be seen in Littleton, MA.
Debbie
home phone: 508-486-3435 or send mail, JUMP4::JOY
work dtn: 276-8629 (don't call)
|
| 7.92 | 1966 DODGE CHARGER | AIMHI::FREGEAU | | Tue Apr 09 1996 09:26 | 14 |
|
Tina Fregeau
DTN: 264-3493
MKOTS3::FREGEAU
1966 DODGE CHARGER
Auto 4:10 sure grip. Virginia car, no rust. Code E Blue laquer, black
interior in execellent condition. Beautiful car. Too many details to
list.
Appraised at $14,000. Must sell - $7,500.
|
| 7.93 | MISC. ITEMS FOR SALE | BIGQ::WELLS | | Tue Jun 04 1996 15:08 | 23 |
| Scott Wells
BIGQ::WELLS
225-5553
HOME: 508-460-6072
MISCELLANEOUS FOR SALE
Technalon car cover by Covercraft (tan) for a 1988 - 1993 Ford
Mustang. 4-layer polypropylene all-weather cover in excellant
condition. $60
Smoke headlight covers for a 1988 - 1993 Ford Mustang. 3 for
passenger side and 1 for drivers side. $20 for pair. $30 for all 4.
Tailight black-out kit for a 1988 - 1993 Ford Mustang in excellant
condition. $40
Sony Car Discman - Model #D-824K - comes with all hookups for car. $100
Pair of chrome valve covers for a 1966 GTO. These are reproductions
in excellant condition that were never used. $50
Can be brought to HLO or seen 2 minutes away at my home.
|
| 7.94 | fiberglass cloth | WECARE::ROBERTS | climb a ladder to the stars | Tue Jul 16 1996 10:58 | 14 |
|
Carol Roberts
381-1759
[email protected] <---- please use
Fiberglass cloth for sale. This is the type used to repair boats/cars/boards
etc. Two rolls - the cloth measures 44 inches wide there is more than 60
yards on each roll. Wilton NH or can be brought to ZKO.
$75 each roll or BRO
|
| 7.95 | BBC Valve covers | VMSNET::M_MACIOLEK | Four54 Camaro/Only way to fly | Wed Sep 18 1996 08:28 | 11 |
| 7.95 | | KDX200::COOPER | There is no TRY - DO or DO NOT! | Fri Feb 07 1997 09:23 | 11 |
| Wheels - n - tires
I've got four BRAND NEW Saleen 16" 5-star mustang wheels with Firestone
SZ50 225-ZR-50/16's on 'em. I just bought 'em for my '87 stang when the
wife said I could buy a '96 for Xmas. In the trade, I got to keep the
wheels/tires. 4-lug pattern.
Less than 500 miles on the tires and not a scratch on the wheels. $850
for the whole set. Balanced, mounted, ready to bolt on.
Send mail!
|