Conference napalm::musclecars

    wmois:: Denine_v
    508 632-7209
     
    I have some FOrd motors for sale 289's ,302,351clevlands and 390,460
    engines .if interested contact me at above phone or send via mail.
    
          

    Wow..looks like wmois::Denine_v has a bigger parts yard than I do.
    He also ads in Mopar and GM.
    
    The Mad Weldor....Jim...:-)

re. last

  You know, I was thinkin the same thing.  Sounds like a business to me, or alot
of cars out back...

    
    Attention Ford heads (Jim Koehler, A.J. Sanclemente, et al)
    
    I have just picked up on a valuable resource for Ford restorations.
    It's the hardcopy equivalent of Ford's parts microfiche for all Ford
    passenger vehicles (Bronco included) from 1965-1972.  I also have the
    exploded diagram book, showing all major sub-assemblies.  The parts
    book covers everything, including;
    
    1. A complete Shelby Mustang (GT-350/GT-500) parts listing from 65-70
    2. A listing of all Ford off-highway and over the counter "Muscle parts"
    3. Identification tables for things such as Differentials, transmissions,
       and suspension pieces.
    4. Lots of valuable restoration information, including color and location
       of component paint daubs and identification stripes.  For example,
       if you want a listing of all Hi-po intake manifold casting and part
       numbers for the 351c, I can give it to you.  Might be nice the next
       time you visit a large swap meet or junkyard.
    
    I've found that a lot of parts are still available through Ford for
    popular makes from the sixties.  Problem is, unless you have a part
    number, most counter guys can't be bothered to look through the
    microfiche (that is, providing they have the fiche for older cars)
    If you tell me what you need, I can probably get you a part number
    which you can bring to the parts counter - if it doesn't appear in the
    current parts listing, don't despair.  Ford is frequently known to
    supercede old part numbers with new ones.  Have the parts man look in
    the O.S.I. book (a listing of all obsolete, superceded part numbers and
    their current status)  He'll probably give you a lot of grief for it,
    but hey, it's worth it!
    
    Hope I can help you guys out.
    
    Tom                    
    
    
    

    Dean Hawke
    225-4631
    Juran::Hawke
       
     				For Sale
    
         I have a 3/4 inch rear sway bar with all poly bushings for sale.
    I it will fit 71-73 Mustangs and other similar sub framed Fords. I also
    have the original mounting intructions. $50 takes it please send mail
    
            Dean

Holley 650 Vacumn secondary carb and Weian Aluminum dual plane manifold for Ford
302 for sale.  Came off the engine I put in my pick up.

Don't know, someone give me $150.00 for the whole thing, iti's yers.

Ed Keltz
293-5217 (DTN, yea, you can call me)
Home 603-595-9455
MSBNET::KELTZ

Hi all:

I need a '66 Mustang 6000RPM Low-Profile Rally Pac.  
I have a '65 Hi-Profile Rally Pac that needs some tach repair.

I'd like to buy the '66 version outright, or include the '65 as a partial trade.

Also need a '66 Mustang radio antenna....


Call me @ DTN 473-2240 or at DEOVAX::MEHRL.


Thanks,

Gary

      I have a complete dual exhaust setup for a 69 mustang fastback. It
    consists of a head pipe, 2 intermediate pipes w/resonators, transverse
    muffler, and tailpipes. They are exactly the same as is on my 69 GT350
    except that they are of a smaller diameter. I picked up the whole setup
    years ago and could not use it. It is all in practically unused cond
    with perhap a few hundred miles of use and absolutely no rust or scale.
      I believe that it should fit a 302 Mustang. Asking $200 but willing
    to talk. Will deliver within a reasonable area.(Central to Southeastern
    Mass)  Ron Duclos @Freebe::Duclos
    
    
    

For Sale:  Complete(cats back) MAC Exhaust system with Dynomax mufflers 2 1/2"
	  - fits all late model mustangs from 87 on...
	  - all industrial plated for corrosion resistance
	  - used for about 8k mi (about one year, no winter driving)

asking $125.00 or B.O.

just switched back to original system this a.m....this system is fine except its
a bit too loud for my street weenie mobile sensitive ears:-)

send mail to elwood::dimascio or call dtn237-3387 or eve 508-537-8390


Rich

For Free - a stock Ford air cleaner that fits 289-equipped cars 1965-6-7?  I
bought it thinking it was for a Mustang, but it is not.  Hard to describe - 
it is shaped like a torque converter, and has a lid only slightly larger than
the air filter element (the lid is much smaller than the body of the air 
cleaner).  Missing the snorkle, but any Ford snorkle of the era can be modified 
to fit.  

It's in Ford lt. blue, with the orig. 289 sticker and a couple very small dents.
Easily restorable; really only needs paint.  Fits Falcons?  Fairlanes?  Fits 
something with a 289, in any case ;-)

Free, but you pay the shipping if out of state.


Steve
WEPUBS::HELMREICH

Ed Keltz
msbnet::keltz
293-5217
(603) 595-9455


Weian Dual Plane maniflod and Holly 650 4 bbl, Vacumn secondary's, for 
sale.  Came off a 302.


Someone give a $100.00 and there yours.  The Carb will need a rebuild kit
as it's been sitting for a while and Holly's ar notorious for dryin out.

Ed Keltz

    
    It's garage clean out time.
    
    The following Ford/Cougar items are offered for sale:
    
    1 Pair Late `68 (Casting date 12/4/68) 428 Cobrajet Heads
      Bare heads (no springs, retainers, rockers) valves included
      though the intake valves will need replacement
    
      $200
    
    1 Pair `65 289 Heads with cast in pushrod slots.  These are NOT 
      271 horse heads with screwed in studs.  Complete.
    
      $50
    
    1 Black 1969-70 Cougar dashpad.  Standard Cougar (not XR-7) in 
      excellent shape.  No dimples or tears.  For a non-A/C car, though
      I can supply parts needed to convert to an A/C dash at no charge.
    
      $100
    
    1 Big Block Mustang/Cougar battery heat shield, part number 
      C70Z-10A682-B.  Not a reproduction.  Uncut and in excellent shape.
      Very scarce restoration item.  
    
      $75
    
    1 1969 Cougar XR-7 dash clock.  Working condition
    
      $25
    
    Please send/author, no calls please
    
    Tom  
     
    
    

    
    1969 Mustang Grille.
    New in box, though one small crack.
    $75 OBO
    
    Repro grilles go for $140

    Rich Bonazzoli
    5onflr::Bonazzoli
    226-6092
    
    FREE  Ford 9" rear diff chuck. 3.50 gears.  Set up for 31 spline axles.
    The pinion is shot, but the whole unit must be good for parts
    for someone.  It is located in Fitchburg, Ma., but I can bring
    it to Littleton where I work.
    
    Rich         

Steve Helmreich
CXO2-1/7B
DTN 522-3382    
Hm. 593-7013

    FREE Ford 8" rear diff chuck. 2.80 gears.  Stock spline arrangement (28?)
    The ring/pinion have wierd wear patterns, and the rear end was noisy - but
    the rest of the parts seem good.  I'm guessing the backlash was not to spec.
    No drain plug on the housing.  Appears to have been OEM on a '66 Mustang 
    289.

    It goes to the scrap pile next week.

    Dean Hawke         
    225-4631
    Bigq::Hawke
    
    
    	Accel dual point distributor with just about new points, 
    condensor, cap and rotor.  The periphrals all have less 1k on 
    them.  This unit was replaced with an electronic one.  Very
    good condition $50 obo...please send mail
    
                   Dean

    	John Richardson 
    	226-7778 
    	dcsjcr::john
    	
    	
    	(Entered for my brother-in-law, call him not me)
    	
    	351C4v & 4-spd from a 71 Mustang Fastback. (Dont know the miles).  
    	He was going to drop it into his Fairlane (see CARS-4-SALE/FORD)
    	but lost interest in both projects.
    
    	Engine: Carb, heads, intake, manifold, bellhousing,
    	4-Spd has linkage 
    
    	Will separate or both.  I'm not sure what he was asking for a price, 
    	you'll have to work it out with him.  (I know he wasnt "giving the
    	stuff away") 	Parts are located in Charlton, Mass
    
    	Call him Mon-Fri 8am-4pm 508-798-8519  Ask for Chris (in Parts Dept)
    
    

    The following are parts that I bought for my '88 Mustang GT, I am 
    selling the car in the spring, but these parts are not going with 
    the car.
    
    K & N  Air Filter     (with the cleaning kit)         $35.00
    Accel Super Coil                                      $35.00
    Hypertech Power Pulleys  (underdrive pulleys)         $70.00
    Hypertech Power Module   (stage 3 chip)              $140.00
    GTS Blackout Covers (for headlights,taillights, and foglights) $75.00
    
    I live in Oxford and work at SHR, I am willing to drive to meet you.
    Home phone  ----> (508)987-0493    please leave a message.
    DTN ---->  237-2653

    I have the following part for sale
    1 2.5 in. MAC comp. H-Pipe chrome finish very clean 
    has been on the car only once. Has instructions for installation
    Call at (202)622-2938 or E-Mail Larry Collins @COP
    I am in the Washington D.C. area
    
    Price $75.00

    Well its 3 years later..I'm still here and the exhaust system in 29.8
    is still available..same price-same comments.

    
     Wow....I had to check the dates to verify the 3 years.  :-)
    
       I own a '69 mustang coupe, 302 4v....has single exhaust at the
    moment and was recently checking into prices for a dual exhaust setup
     debating whether or not to get duals now or wait until the old system 
    dies.
    
      at the rate I use the car ( shows only) my old system may  not die
    for many many years..So, I may change it now and put some cheery bombs
    on for the Muffler Rap Contest !
    
    /Bob
    

    
    
    	Bob, from what I hear you can take the exhaust off of your Pacer
	and just bolt it right on, or, sell your car to a girl. ;-)
    

    
    
    :')   DOE !
    
    
       I did sell the car to a Girl....didn't you see my Mustang photo's
    in my Office....
    
      Check her out....then Cry because she's with me Pal and Not you ! 
    .....of course the car looks good too.
    
    ;')   /Bob