| Title: | CMP |
| Notice: | Welcome to the CMP notesfile |
| Moderator: | FABSIX::B_TOWER LLE |
| Created: | Tue Oct 31 1995 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 94 |
| Total number of notes: | 6381 |
This note is designated for WESTECH procedures, issues,
recipes and system information for reference.
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 39.1 | ACCESS CODES | SUBPAC::BJUBINVILLE | CMP-6 Equipment Engineering | Tue Oct 15 1996 23:36 | 6 |
SCOMAN::TDYER 35 lines 6-AUG-1993 16:27
-< SYSTEM PROBLEM HINTS!!! >-
--------------------------------------------------------------------------------
The access code is 456. The MFG access code is 222.
| |||||
| 39.2 | leak h/e | FABSIX::B_FINN | Wed Dec 04 1996 19:21 | 13 | |
Reinstalled air/water knife. Tried to boot system, to check for leaks, but system would not power up. Traced main power circuit and found it faulting for leak detection. Found a least a gallon of water/glycol in bottom heat exchanger cabinet. This was leaking from a stripped and crooked pvc bushing at the pump. Replaced fittings and recharged the heat exchanger A shift | |||||