| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 1452.1 | It works fine. | EMDS::SNOW | | Tue Sep 08 1992 12:51 | 4 |
|
Airtronics Rx's work fine with JR Tx's. You will have to experiment as
the channel outputs are a bit different.
|
| 1452.2 | FM only (I think) | SNAX::SMITH | I FEEL THE NEED | Tue Sep 08 1992 14:14 | 3 |
| Also, I believe JR will drive an Airtronics FM but not the PCM.
Steve
|
| 1452.3 | thanks | RANGER::PITONIAK | | Tue Sep 08 1992 15:19 | 10 |
| Thanks,
I finally got through to Airtonics Tech support, and they informed
me of what you have said. The servo outputs are in a different order
so you need to switch servo's around, but they work fine.
thanks again
mike
|
| 1452.4 | X-347 is Compatible with Airtronics FM Rx's | SELL3::MARRONE | | Mon Sep 28 1992 13:21 | 7 |
| I have been using an Airtronics 6 channel FM Rx on my Gremlin and
flying with the JR X-347. Never had a problem other than the channel
assignments mentioned previously. Apparently, they are compatible, and
work fine. Don't know about PCM though.
Regards,
Joe
|
| 1452.5 | Futaba in Germany works with JR FM | ITHIL::CHAD | Hi | Wed Oct 21 1992 13:08 | 9 |
| Just a quick note of interest.
In Germany on 35mhz the Futaba and JR/Graupner FM receivers are
compatible. I am using an American X347 and JR/Graupner 35mhz tx module
and a Futaba FP-115xx FM micro rx (5 channel) with no problems.
THIS IS FOR GERMANY, NOT USA
Chad
I also have a C-16 8 channel JR/Graupner rx
|