Conference noted::woodworking_and_tools

    anybody have a used compressor they have been thinking of parting
    with, drop me some mail.
    
    thanks, jim

 Now you can build your own subwoofers.....
    I took these out of a pair of subwoofers I bought, I actually
    only wanted the amplifier. These are the raw drivers so you can
    design and build your own set of subwoofers for you home theater
    or stereo system. 
    
    I have 2 Peavey Scorpion Plus 15" speakers. 
    
    According to Peavey,
    
    * They are low frequency sound reinforcement speakers and are 
      flat down to about 40hz.
    * Rated for 200watt continuous.
    * Have Kevlar impregnated cones.
    * Die Cast Al frames
    * 8ohms.
    
    According to Daddy's Junky Music Stores, $109.00 ea
    
    Asking $50.00ea shipping extra
    Contact:
    Ray Tadry
    DTN 225-5691
    SUBPAC::TADRY

                      
    

In the Nashua, NH area...

Reliant 1HP single stage dust collector, 650CFM, plus 5 micron high density bag

Purchased shortly before Christmas.  Used about 30 minutes.  Perfect condition. 

Retails (with the high density bag) for $210.00

Yours for $175.00

Features:
	- mobile base, easy to move from machine to machine
	- quiet, especially compared to a shop-vac
	- wired for 110v, but can be wired for 220v.
	- great dust collection for planer, jointer, table saw etc.

call Meg @ DTN 381-2066 

             or

     e-mail (preferred) TLE::GARRISON or [email protected]

Dan Daddieco
DTN-381-0743 or 508-692-9318 
GROOVE::DADDIECO or [email protected]

Dura Last Air Boosters  (four of them!)
Model DB-7
Dimensions: 7 1/4" X 6"
Weight: 2 lbs.
Fan:6 blade, 5 1/2" 215 CFM
Motor: 120v 60hz 28watts - 0.4 Amps Maximum
Motor Lubrication: Permanent
Electrical Components: UL listed

"Put more hot or cold air in any room - solves the problem of hard to heat or 
cold rooms"  (this is copied from the owner's manual)

Basically these are motorized fans enclosed in galvanized pipe readied to 
interface with heating or air-conditioning duct-work. I bought them new about 
15 years ago to move air around a coal stove for better heat distribution - 
used two of these units for one season then converted to gas heat. So two are 
brand new still in the original boxes. The other two are also just like new.

I think I paid $33 for each one.  You can have all four for $10.00. If they 
don't sell the trashman gets them!

thanx ... d.

All of the following equipment is little used and in excellent condition except
where noted. All prices except for the jointer are negotiable. Im submitting
this list for a friend, Glen Karam (6034855967), so please contact him directly.

	Delta 12" portable planer with dust collector
	hook up $350

	Reliant 6" jointer $300

	Reliant 1hp dust collector $125

	Delta bandsaw ?", very old needs some work  $100
	

Jim,

    Did you convert someone else to the Nirvana of hand tool wooodworking?
    :-)

George

    Ed Yee
    DTN 223-5280 
    Danger::YEE <-- preferred
    
    Wanted:    Delta 12 surface Planer Manual
    
    I just bought a used Delta 12 Planer which did not include the manual.
    I would like to borrow the manual or make a copy of it.
    
    Thx,
    
    Ed

    Ed Yee
    DTN 223-5280 
    Danger::YEE <-- preferred
    
    For Sale:	
    
    Orbital Sander
    	Ryobi Orbial Sander - Model 115
    	Variable Speed
    	4.5 inch pad (hooked pad-not PAS)
    	Dust Collector
    
    	Includes 5 sanding disks (hooked type)
    
    	$30/BO  Can be seen in PK3 (retails for $60 new)
    
    Scroll Saw
    	Delta 15 in Scroll Saw (Model ??? - 4-5 years old)
    	Good condition/Little use
    	Cast Iron table
    	
    	Includes saw blades (5)
    
    	$85/BO  (was $125 new)
        	
    

    Ed Yee
    DTN 223-5280 
    Danger::YEE <-- preferred
    
    For Sale:	
    
    Scroll Saw
    	Delta 15 inch Scroll Saw (Model ???)
    	Good condition/Little use
    	Cast Iron table
    	
    	Includes saw blades (5)
    
    	$75/BO (price reduced $10)  (was $125 new)
        	
    /Ed

    Jeff Green
    dtn 264-0707
    birdie::jgreen 
         or
    [email protected]
    
    Porter Cable 3" x 21" belt sander. Bought 5-6 years ago to
    repair/finish a hardwood floor in last house. It was cheaper to buy
    this slighlty used then pay rental charges. 
    
    Asking $80. Can be seen in Hampstead NH or Nashua NH.
                                                         

Paul Balich
CSCMA::BALICH
Dtn 237-7028

I got the following pair of window SASH's available to anybody that can use 
them ...This is the second batch.

Great for Sheds, Cabins, need to replace a single window, etc.
Can be picked up in Chelmsford, MA

They *are* NEW  TOP-OF-THE-LINE *WHITE* sash's with white tic-tac-toe grids 
in between the glass.

Will break up for individual selections.
    
- BRAND new - Never used!
- Double hung 
- Vinyl 
- 2 latch bolts to each sash
- Low E glass
- Very well constructed - MUST see to appreciate!

Reason for selling:  Salesman orderd wrong size - He didn't want to take them 
We have the correct sized ones currently on our newly built house to view.

Here they are:

6 pairs (top and botom SASH)  31 1/2 (W) x 27 1/2 (H)
1 pair  ( "       "     "  )  23 1/2 (W) x 38 1/2 (H)
2 paris ( "       "     "  )  30 3/4 (W) x 20     (H)

For sale on first come first serve basis. Can be seen at my
home (east of Manchester, NH) or ZKO. All tools are in excellent
condition except where noted.

	1) Nova scroll chuck (3/4"-16) w/ all parts and......$70
		accessories

	2) gray Craftsman tool box w/ removable metal........$15
       tray, box is about 18w x 8d x 9h

	3) red Craftsman tool box w/ removable tray and......$25
       three drawers, box is about 20.5w x 8.5d x 9h

	4) Ryobi 10" compound chop saw, angle setting........$50
       mechanism is broken but still locks at preset
       angles. Also has carbide blade.

	5) Assorted Craftsman wrenches, drivers & sockets

		1" combo wrench..................................$5

		1/4", 3/8" & 1/2" tear drop socket drivers.......$30

		1/2" round head socket driver....................$5

		6 pt. 1/4" standard sockets......................$10
		1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2

		6 pt. 1/4" metric sockets........................$10
		4mm, 5, 6, 7, 8, 9, 10, 11, 12

		12 pt. 3/8 metric socket.........................$1
		13mm

		12 pt. 3/8 standard sockets......................$10
		3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4				

Peter Neil
Bump::pneil ([email protected] preferred)
dtn 276-8893
home 508-372-6507

Tools for sale:

Sears Craftsman 1.5hp Router - $50
	2 months new, new Craftsman design this year, Worked great
	Includes nice carry case
	Built-in work light
	25000 rpm
	2 additional bases I made for accurate cutting (they're good !)
	2 bits
  Just got into more serious woodworking and decided I needed that really
  neat new Dewalt Router instead.

Sears Craftsman Router Table - $20
	Never used, retails now for $39.99
	18"x13" aluminum table top
	Includes everything except the original box

Makita Multi-tool Stand - $40
	Cheapest mailorder price I could find is $55
	Brand new still in box
	Got it for the Makita 2708 benchtop table saw but I ended up
	getting a Delta instead.
	Very heavy duty.

I am interested in making the transition from "carpenter" to "woodworker,"
and that needs some finer tools beyond what I have.

First off, I'm looking for a THICKNESS PLANER.

I want to start used, and relatively cheap.

Does anybody have one of those under-$400 Delta or Ryobi 10" or 12"
or similar planers that he'd like to get rid of to upgrade to a better tool?

I live in Sudbury and work in Marlboro.
Travel between Shrewsbury and Nashua is not out of the question.

Send e-mail to REGENT::POWERS.

- tom powers]

re: .908

Peter Neil
Bump::pneil ([email protected] preferred)
dtn 276-8893
home 508-372-6507

Tools for sale:

Sears Craftsman 1.5hp Router - Sold
Sears Craftsman Router Table - Sold

Makita Multi-tool Stand - $40
        Cheapest mailorder price I could find is $55
        Brand new still in box
        Got it for the Makita 2708 benchtop table saw but I ended up
        getting a Delta instead.
        Very heavy duty.

    Ed Yee
    Danger::yee ([email protected] preferred)
    dtn 223-5280
    
    Wanted: 1. Manual for Ryobi Portable 6" Variable Speed Jointer
    	    2. Accessories for Ryobi BT3000 table saw (router kit or 
    		extension table)
    
    I need a copy of the manual for the Ryobi 6 inch variable speed 
    jointer.  Call me if you have a copy.  This jointer is like the 
    6 inch Delta variable speed jointer.
    
    Thx inadvance,
    
    Ed
    

    
    Sue Baust 
    [email protected]
    dtn 223-6215
    
    For Sale
    
    15 15foot old pine floor boards from my attic - they are 1" by 12"
    There are alos a abunch of shorter pieces.
    
    Thought someone might like to clean them up and cut off the flooring
    edges and use for cabinets, ala Norm Abrams.
    
    Asking 225 or best offer
    
    Theyare in Southboro, MA
    

Peter Neil
BUMP::PNEIL ([email protected] preferred)
dtn 276-8893
home 508-372-6507

For Sale:  1/4" Shank CMT Router Bits (I was told they were the best when I 
bought them)

Just upgraded my 1/4" shank router to a 1/2" shank model and am starting
to replace some of my bits (also CMT btw).  The Chamfer, Rabbet and
Straight bits have been used only for a few test runs.  The rest have
never even been chucked.

	o Roman Ogee 1" dia., 1/2" length		- $20 (CMT $33.70)
	o Chamfer (45 deg) 1 5/8" dia., 9/16" length	- $20 (CMT $33.90)
	o Rabbeting 1 1/4" dia., 1/2" length		- $20 (CMT $30.00)
	o Roundover 1 1/4" dia., 9/16" length		- $20 (CMT $32.40)
	o Cove 1 3/8" dia., 5/8" length			- $25 (CMT $35.90)
	o Straight 1/2" dia., 3/4" length		- $12 (CMT $20.00)
	o Straight 3/4" dia., 3/4" length		- $12 (CMT $18.70)

Will talk on a package deal...

I work in Stow MA and live in Haverhill MA - will deliver/show anywhere
within reasonable distance of Rt 495 near/between those points.

Regards,

Peter Neil
BUMP::PNEIL ([email protected] preferred)
dtn 276-8893
home 508-372-6507

For Sale:  1/4" Shank CMT Router Bits - Reduced prices  (any lower and it's not worth it
for me to sell them).

Just upgraded my 1/4" shank router to a 1/2" shank model and am starting
to replace some of my bits (also CMT btw).  The Chamfer, Rabbet and
Straight bits have been used only for a few test runs.  The rest have
never even been chucked.

        o Roman Ogee 1" dia., 1/2" length		 - $15 (CMT $33.70)
        o Chamfer (45 deg) 1 5/8" dia., 9/16" length	 - $15 (CMT $33.90)
        o Rabbeting 1 1/4" dia., 1/2" length		 - $15 (CMT $30.00)
        o Roundover 1 1/4" dia., 9/16" length		 - $15 (CMT $32.40)
        o Cove 1 3/8" dia., 5/8" length		 - $20 (CMT $35.90)
        o Straight 1/2" dia., 3/4" length		 - $12 (CMT $20.00)
        o Straight 3/4" dia., 3/4" length		 - $12 (CMT $18.70)

I work in Stow MA and live in Haverhill MA - will deliver/show anywhere
within reasonable distance of Rt 495 near/between those points.

Regards,