TOPIC | 1032.0 | AT Serial port to DECconnect wiring |
| 1032.11 | Wed Nov 29 1989 17:18 | Pictures of what's inside would help. | 12 lines |
TOPIC | 1609.0 | GIF from USENET - anybody? |
| 1609.65 | Tue Jul 31 1990 00:15 | Some, try ... | 20 lines |
TOPIC | 1693.0 | WordPerfect V5.0 |
| 1693.18 | Tue Mar 21 1989 23:51 | Definitionof .DXF,.DWG files | 39 lines |
TOPIC | 1953.0 | The Official Items For Sale Note |
| 1953.1421 | Thu Jun 27 1991 17:53 | Need memory | 8 lines |
| 1953.1425 | Sat Jun 29 1991 00:16 | I need more memory for an old IBM 5/50. | 19 lines |
TOPIC | 2791.0 | Mice or Digitizers, which is better? |
| 2791.3 | Fri Mar 17 1989 23:36 | TABLETS (digitizers) YES, MOUSE menus NO | 26 lines |
| 2791.6 | Tue Mar 21 1989 23:57 | PLEASE get at least 4-button puck | 18 lines |
TOPIC | 2792.0 | Speaking of Digitizers |
| 2792.1 | Fri Mar 17 1989 23:40 | I'll check AutoCAD | 9 lines |
TOPIC | 3832.0 | VSXX-AB TABLET ON PC ? |
| 3832.14 | Sat Jun 01 1991 00:22 | Hitachi is fine but need correct cable layout | 10 lines |
| 3832.17 | Wed Jun 05 1991 22:04 | I'll check | 6 lines |
TOPIC | 3883.0 | Paintbrush and Logitech mouse |
| 3883.11 | Thu Jan 25 1990 14:16 | Here it is | 10 lines |
| 3883.13 | Fri Feb 02 1990 11:55 | I would say YES | 9 lines |
| 3883.16 | Thu Feb 08 1990 22:40 | PC-PaintBrush-IV-Plus is what I'd suggest | 42 lines |
| 3883.18 | Thu Feb 15 1990 12:15 | I love my copy of PCPBIV+ | 21 lines |
TOPIC | 4101.0 | MS-DOS MUMPS (PD) available? |
| 4101.11 | Thu Feb 08 1990 22:52 | Specific calls are a problem | 28 lines |
TOPIC | 4249.0 | Kermit question, perhaps.... |
| 4249.7 | Sun Feb 25 1990 08:50 | Used to be TOGGLE 7-8-bit key | 8 lines |
TOPIC | 4256.0 | DEC Mouse question |
| 4256.12 | Tue Mar 13 1990 21:39 | Driver for the VSxxx-AB (PAD) | 16 lines |
TOPIC | 4275.0 | Adaptec SCSI controller problem |
| 4275.31 | Tue Oct 29 1991 22:38 | Talk to the local folks first | 17 lines |
TOPIC | 4316.0 | Advice on MS Works |
| 4316.8 | Thu Mar 15 1990 22:02 | MS-Works sounds ok to me | 18 lines |
TOPIC | 4345.0 | New Species of Mouse... |
| 4345.6 | Fri Mar 16 1990 13:10 | Does this also apply to the NEW ds-316 | 6 lines |
TOPIC | 4346.0 | Generic CSCMAS:: Note |
| 4346.2 | Fri Mar 16 1990 13:15 | How about ??? | 9 lines |
| 4346.108 | Tue May 08 1990 09:50 | CSCMAS one-way notes file. | 24 lines |
| 4346.118 | Wed May 09 1990 22:20 | Just to re-state | 33 lines |
TOPIC | 4358.0 | VCR Backup card |
| 4358.15 | Tue Mar 27 1990 17:43 | How about doing it on 2 tapes | 39 lines |
TOPIC | 4372.0 | PC assembler to MACRO translator? |
| 4372.4 | Thu Apr 05 1990 23:24 | Can't get LaserTwin to work | 7 lines |
TOPIC | 4403.0 | Summagraphics Mouse Emulator available? |
| 4403.3 | Tue Apr 03 1990 14:03 | How much $$$ for the software | 21 lines |
TOPIC | 4466.0 | L&W in Nashua - Opinions? |
| 4466.10 | Wed Apr 18 1990 22:45 | Give them a chance to fix it | 17 lines |
TOPIC | 4472.0 | Proposal: PC Toolshed (shareware pointers) |
| 4472.7 | Wed Apr 11 1990 23:08 | I don't think security would buy it either | 20 lines |
TOPIC | 4488.0 | looking for GIF PROGRAM for tandy 1000 |
| 4488.3 | Tue May 01 1990 22:56 | CSCMAS due soon 4346.89 | 10 lines |
TOPIC | 4490.0 | DECMOUSE.COM question |
| 4490.5 | Thu Apr 12 1990 22:44 | And then there were 3. | 17 lines |
TOPIC | 4578.0 | Official Bernie Day |
| 4578.5 | Tue May 08 1990 10:11 | Where would Bernie Day be ? | 13 lines |
TOPIC | 4615.0 | Laptop PC's
|
| 4615.8 | Wed May 09 1990 22:54 | Look in to service contract also | 34 lines |
TOPIC | 4658.0 | LA75, XONXOFF, and COM3 |
| 4658.4 | Fri May 11 1990 14:16 | Parallel solves problem and not too expensive. | 12 lines |
TOPIC | 4710.0 | Color Printers - What Can you Use Them For? |
| 4710.6 | Thu May 24 1990 00:22 | HP Paint Jet | 10 lines |
TOPIC | 4713.0 | Windows 3.0 |
| 4713.144 | Sun Jul 08 1990 10:33 | It's in the manual | 9 lines |
| 4713.146 | Sun Jul 08 1990 22:34 | How about ?? | 15 lines |
| 4713.220 | Sun Apr 28 1991 10:40 | Others only offer 30 days for a small fee | 36 lines |
TOPIC | 4851.0 | DOS SOFTWARE ???? |
| 4851.7 | Mon Jun 18 1990 22:54 | The envelope please.... | 15 lines |
| 4851.9 | Wed Jun 27 1990 20:06 | Price increase for internal DEC | 10 lines |
TOPIC | 4901.0 | Geneology |
| 4901.5 | Wed Jun 27 1990 19:39 | See VIXVAX::GENEALOGY notesfile | 27 lines |
| 4901.9 | Fri Jun 29 1990 07:25 | Programming help is always appreciated | 12 lines |
TOPIC | 4905.0 | EXCEL support for LN03? |
| 4905.3 | Fri Jun 29 1990 07:32 | Win V3 does NOT have the driver | 11 lines |
| 4905.6 | Mon Jul 02 1990 23:20 | Thanks... | 6 lines |
| 4905.18 | Mon Oct 29 1990 21:13 | Does it require WIN/R | 14 lines |
TOPIC | 4906.0 | Frustration over 3.3 vs 4.01 |
| 4906.22 | Sun Jul 08 1990 22:26 | One disk nice, but S L O W directories | 34 lines |
TOPIC | 4928.0 | How much for a 386 clone plus laser printer etc. |
| 4928.4 | Mon Jul 16 1990 21:46 | Check out the magazines | 7 lines |
TOPIC | 4974.0 | Super VGA Question? |
| 4974.2 | Sun Jul 15 1990 00:18 | I wasn't impressed | 18 lines |
TOPIC | 5021.0 | Maybe my Memory fails me ?? |
| 5021.1 | Wed Jul 25 1990 11:05 | You need the special loader calls | 40 lines |
TOPIC | 5121.0 | Does Anyone Have ANIMATOR Shareware? |
| 5121.1 | Tue Aug 14 1990 11:10 | See note 3933.8 in IBMPC | 7 lines |
| 5121.4 | Tue Aug 14 1990 15:57 | Try this...... | 16 lines |
TOPIC | 5156.0 | .GIF to .GEM ??? |
| 5156.1 | Tue Aug 21 1990 12:11 | # that really shine but cost is there too. | 21 lines |
TOPIC | 5161.0 | 120 meg and only can use 32 meg |
| 5161.5 | Thu Aug 23 1990 09:06 | On everything ? | 5 lines |
TOPIC | 5162.0 | Installing COM3 & COM4 on AT with mailorder board |
| 5162.20 | Sat Aug 17 1991 23:31 | You must specify the address for KERMIT | 13 lines |
TOPIC | 5195.0 | How to move QEMM's Page Frame? |
| 5195.1 | Wed Aug 29 1990 14:30 | Maybe you're out of 360Kb free mem | 22 lines |
TOPIC | 5201.0 | MS project for windows help |
| 5201.11 | Sun Sep 09 1990 22:14 | Use the 2-button mouse on the DS333c | 16 lines |
TOPIC | 5223.0 | PC & WS-Monitor |
| 5223.9 | Sun Sep 09 1990 21:48 | Compu-ADD has one that we have tried | 13 lines |
TOPIC | 5254.0 | Mon Sep 10 1990 17:27 | What is the LN05 printer ? | 10 lines |
| 5254.3 | Tue Sep 11 1990 23:17 | That's what I was really after | 9 lines |
| 5254.5 | Wed Sep 12 1990 15:58 | How do I do PS | 17 lines |
| 5254.9 | Sat Sep 15 1990 23:38 | Thanks | 11 lines |
| 5254.11 | Fri Aug 16 1991 00:15 | Generic text but you really should get the PS upgrade | 10 lines |
| 5254.13 | Sat Aug 17 1991 23:23 | LT might work but CAPSL or PS would be better. | 27 lines |
TOPIC | 5318.0 | New Prodigy Release |
| 5318.45 | Tue Feb 19 1991 15:23 | Free mail to the troops | 19 lines |
TOPIC | 5396.0 | Himem.sys problems? |
| 5396.1 | Wed Oct 10 1990 00:15 | Try the Microsoft hotline | 14 lines |
TOPIC | 5561.0 | Software Rentals. Where to TRY it cheap! |
| 5561.1 | Tue Nov 13 1990 22:24 | Check for virus first | 7 lines |
TOPIC | 5691.0 | Help please: LJ250 Printer, MS-Windows 3.0, Color Graphs. |
| 5691.4 | Mon Dec 17 1990 23:03 | Did you select HP PAINTJET and set OTHER mode? | 11 lines |
TOPIC | 5697.0 | Kermit on Ethernet ??? |
| 5697.2 | Wed Dec 12 1990 21:16 | Kermit V3 | 9 lines |
TOPIC | 5777.0 | LJ250 and Wordperfect doesn't match... |
| 5777.1 | Wed Jan 02 1991 22:09 | Set it to HP Paintjet mode | 9 lines |
TOPIC | 5883.0 | IMG from Digital scanner to PCX ?? |
| 5883.4 | Mon Jan 21 1991 23:15 | Can the MD300 be used on the PC with the right interface module ? | 9 lines |
TOPIC | 6540.0 | Still more scanner questions |
| 6540.16 | Fri May 31 1991 23:48 | Calera and Complete Page scanner | 41 lines |
TOPIC | 6621.0 | Heartache with PC Paintbrush IV |
| 6621.3 | Sat Jun 01 1991 00:33 | Publishers paintbrush for windows V3 | 8 lines |
TOPIC | 6774.0 | Questions on DECstation 320 inheritance |
| 6774.19 | Wed Jul 31 1991 23:09 | Where is ARNOLD located ? | 9 lines |
TOPIC | 6988.0 | Help!! DECstation 333/SCSI fails with mem errors? |
| 6988.9 | Thu Aug 08 1991 23:34 | Check the cable also | 23 lines |
TOPIC | 7117.0 | RZxx (RZ55) disk on a DECstation PC with Adaptec (new) controller ? |
| 7117.2 | Mon Sep 02 1991 11:37 | More info on the DECSTATION notes file | 7 lines |
TOPIC | 7132.0 | LJ252 Help Needed |
| 7132.1 | Mon Sep 02 1991 21:53 | Printer set up for A4 NOT 8-1/2x11 ?? | 8 lines |
TOPIC | 7147.0 | Spreadsheets |
| 7147.9 | Mon Sep 09 1991 23:48 | General reading is good also. | 20 lines |
TOPIC | 7170.0 | How much disk space? (It's never enough) |
| 7170.5 | Tue Sep 10 1991 00:16 | Balance disk space and backup capability. | 34 lines |
TOPIC | 7215.0 | Drive Letter <-> SCSI id |
| 7215.2 | Mon Sep 16 1991 21:55 | I'd call ADAPTEC and ask. | 31 lines |
TOPIC | 7283.0 | DECstation 320+ and Windows 3.0
|
| 7283.1 | Tue Oct 01 1991 01:56 | You must remove all 3 drivers first | 17 lines |
TOPIC | 7870.0 | IDE Disk Install Story and .... |
| 7870.4 | Wed Jan 22 1992 23:34 | IDE before SCSI except after brain surgery | 12 lines |
TOPIC | 8048.0 | Need help to get color for my screen... |
| 8048.1 | Mon Feb 10 1992 21:42 | I use a similar sequence | 12 lines |
| 8048.7 | Wed Feb 12 1992 22:09 | EDLIN is always there | 14 lines |
TOPIC | 8057.0 | Need someone with Ultrix to spinup RZ56 Drive |
| 8057.1 | Wed Feb 12 1992 22:02 | Available from SSB | 66 lines |
TOPIC | 8177.0 | LK450 keyboard available for PC clones yet? |
| 8177.20 | Tue Mar 10 1992 22:51 | I just got one that is PS/2 compatible | 10 lines |
TOPIC | 8226.0 | Kermit VT300 Keymap--how to get escape? |
| 8226.6 | Sun Mar 15 1992 21:54 | How about LK450 version | 12 lines |
TOPIC | 335.0 | Tue Mar 27 1990 12:58 | Why does VT320.EXE take so much memory | 33 lines |
TOPIC | 339.0 | WINDOWS V3.0 |
| 339.26 | Thu Jun 14 1990 00:04 | MS-NET or which one ? | 23 lines |
| 339.28 | Thu Jun 14 1990 22:41 | Ok | 5 lines |
| 339.39 | Fri Jun 29 1990 07:12 | I saw it in PCSA notes | 8 lines |
| 339.42 | Wed Aug 08 1990 23:48 | Hints and what I've managed to find out. | 138 lines |
TOPIC | 356.0 | Mon Jun 04 1990 15:42 | Windows V3.0 from DDD | 22 lines |
| 356.2 | Wed Jun 06 1990 22:56 | I'm going to wait til June 12. | 11 lines |
| 356.4 | Thu Jun 14 1990 16:13 | The part numbers are ??? | 13 lines |
| 356.6 | Tue Jun 19 1990 22:29 | Sorry. DEC employees lose | 17 lines |
TOPIC | 357.0 | Windows 3.0/DEPCA conflict |
| 357.5 | Tue Jun 19 1990 22:24 | Many others have been disappointed | 18 lines |
TOPIC | 365.0 | Windows 3.0 icon generator available? |
| 365.15 | Wed Jul 25 1990 14:45 | WOW what ICONS | 14 lines |
| 365.33 | Wed Aug 22 1990 23:33 | Worked for me | 4 lines |
TOPIC | 369.0 | Terminal Questions |
| 369.5 | Sun Jul 01 1990 10:18 | Mine came with its own pif | 8 lines |
TOPIC | 375.0 | Thu Jul 12 1990 08:02 | LK250 and Win V3. I need help with keypad and keys | 31 lines |
| 375.3 | Thu Jul 12 1990 17:37 | OK I'll give it a shot | 13 lines |
TOPIC | 378.0 | VT320.EXE problem in Windows 3.0 |
| 378.3 | Thu Jul 19 1990 23:47 | I got it to change fonts | 35 lines |
TOPIC | 380.0 | Pagemaker/Designer problems |
| 380.1 | Tue Jul 17 1990 22:31 | Check the printer setup | 5 lines |
TOPIC | 382.0 | VT320 emulator doesn't like EVE |
| 382.1 | Sat Jul 21 1990 22:21 | Font selection helped me out. | 25 lines |
TOPIC | 383.0 | Paradise VGA drivers for 3.0 |
| 383.3 | Mon Jul 23 1990 21:55 | PLease upload it | 30 lines |
TOPIC | 385.0 | Printing to LA50 from Win 3.0 |
| 385.1 | Sun Jul 29 1990 22:04 | Maybe an IRQ conflict | 15 lines |
| 385.3 | Wed Aug 01 1990 02:40 | Try teh EPSON printer choices | 12 lines |
TOPIC | 386.0 | Windows and AutoCAD . . . |
| 386.2 | Sun Jul 29 1990 22:17 | LA50 is graphcs. | 28 lines |
TOPIC | 387.0 | Can't Print ! |
| 387.1 | Sun Jul 29 1990 22:27 | HAve you tried SPooler=no | 19 lines |
TOPIC | 426.0 | Info on writing Window ApplicationS |
| 426.5 | Mon Oct 01 1990 22:26 | Use DECdirect | 11 lines |
TOPIC | 428.0 | V3 -> LJ250 on COM2 Problem |
| 428.1 | Thu Sep 27 1990 22:25 | Maybe IRQ conflict | 10 lines |
TOPIC | 431.0 | VAXMATE DISPLAY DRIVER ??? |
| 431.3 | Fri Dec 14 1990 10:09 | I tried all that and still no luck | 23 lines |
| 431.4 | Wed Jan 09 1991 21:03 | Is there a newer mouse driver ? | 9 lines |
TOPIC | 444.0 | win 3.0/kermit unusable |
| 444.2 | Tue Oct 23 1990 22:08 | Serial port ok, net crashes | 13 lines |
TOPIC | 447.0 | |
| 447.4 | Wed Oct 31 1990 23:01 | It does NOT run under Win V3. | 21 lines |
TOPIC | 471.0 | MS WINDOWS POSTSCRIPT TO LPS40 PROBLEM |
| 471.7 | Tue Dec 11 1990 22:12 | Use SETUP and watch your font selection | 19 lines |
TOPIC | 500.0 | window icons library builder |
| 500.6 | Wed Jan 23 1991 21:56 | EGGhead | 5 lines |
TOPIC | 513.0 | Prog manger shuffles icons |
| 513.14 | Sun Feb 10 1991 21:23 | Click and Cascade will do it. | 26 lines |
TOPIC | 521.0 | digital logo? |
| 521.3 | Wed Feb 20 1991 22:29 | Paint creates .BMP wallpaper files. | 16 lines |
| 521.5 | Sun Feb 24 1991 10:40 | A challenge... so I did it. | 7 lines |
| 521.6 | Mon Feb 25 1991 22:22 | And the location is .... | 32 lines |
| 521.8 | Fri Mar 08 1991 22:46 | Glad you like it | 12 lines |
TOPIC | 528.0 | MS Window's 3.1 ???? |
| 528.18 | Mon Mar 02 1992 01:13 | April 6 is the big day I heard | 6 lines |
TOPIC | 542.0 | Printer driver for Windows |
| 542.4 | Wed Feb 27 1991 23:20 | I'd use MS C | 12 lines |
TOPIC | 560.0 | Accessory Default Startup Directories? |
| 560.2 | Thu Mar 21 1991 01:02 | Try microSoft hotline | 9 lines |
TOPIC | 583.0 | VT341 emulation |
| 583.3 | Wed Apr 03 1991 00:17 | How about our VT320 or SetHost products | 7 lines |
TOPIC | 588.0 | QEMM, PCSAV4, MS-Win |
| 588.8 | Wed Apr 17 1991 13:04 | The /B- Removes Double buffering | 10 lines |
TOPIC | 622.0 | Gold key emulation |
| 622.8 | Sun Apr 28 1991 11:43 | How about DEC's VT320 emulator for PC's in PATHWORKS V4 | 14 lines |
TOPIC | 629.0 | win 3 screen blank? |
| 629.11 | Fri May 03 1991 00:22 | IDLEWILD makes for SLOW printing | 24 lines |
TOPIC | 636.0 | QEMM (5.11 and 5.12) and Windows (3.0 and 3.0a) |
| 636.10 | Wed May 22 1991 11:45 | call them and see | 9 lines |
TOPIC | 658.0 | VT320 font |
| 658.2 | Thu May 16 1991 22:04 | SMALL fonts | 16 lines |
TOPIC | 718.0 | Why 3 decterm font files for ms windows |
| 718.4 | Tue Jun 18 1991 00:33 | 8514/a ??? | 11 lines |
TOPIC | 813.0 | Wed Aug 14 1991 22:17 | The Windows/OS2 trade show at the World trade center 8/14-16/91 | 16 lines |
TOPIC | 815.0 | presentation tools... |
| 815.5 | Sat Aug 17 1991 23:47 | Stay in Windows V3 on the PC platform | 28 lines |
TOPIC | 874.0 | Bigger DECTERM.FON fonts ? |
| 874.4 | Fri Sep 20 1991 01:03 | I asked about 8514 support and never received any answers | 11 lines |
TOPIC | 900.0 | "Pause or Lock" function with MS-windows ? |
| 900.4 | Wed Oct 02 1991 14:56 | | 10 lines |
TOPIC | 904.0 | Cursor shape in a DOS Window |
| 904.1 | Thu Oct 03 1991 17:39 | Me too. | 6 lines |
TOPIC | 961.0 | MSWINDOWS 3.0 PROBLEM |
| 961.7 | Sun Nov 17 1991 12:34 | Try EMMexclude | 12 lines |
TOPIC | 968.0 | Word for Windows 2.0 upgrade? |
| 968.6 | Wed Nov 13 1991 18:55 | and DDD will ahve it in about 3 months | 17 lines |
TOPIC | 969.0 | Printing from application |
| 969.13 | Mon Dec 23 1991 20:28 | Some info please | 13 lines |
TOPIC | 1064.0 | Window to run DOS commands? |
| 1064.3 | Mon Dec 16 1991 14:07 | Command.PIF | 6 lines |
| 1064.5 | Mon Dec 16 1991 17:45 | OOOps | 5 lines |
TOPIC | 1072.0 | SMARTDRIVE and memory |
| 1072.13 | Tue Jan 28 1992 23:57 | Be careful you do not run out of 'disk' | 6 lines |
| 1072.16 | Wed Jan 29 1992 23:45 | Soft RIP ??? | 9 lines |
TOPIC | 1128.0 | Mouse pointer icons |
| 1128.4 | Fri Jan 17 1992 14:02 | Icon Creator | 5 lines |
TOPIC | 1130.0 | Slick trick with Word for Windows 2.0 |
| 1130.11 | Sat Jan 25 1992 22:21 | NO on the 8514/A from DEC | 6 lines |
TOPIC | 1142.0 | Thu Jan 23 1992 15:49 | Word for Windows V2 and HP Paintjet do not work | 26 lines |
| 1142.1 | Thu Jan 23 1992 16:16 | FLASH update LJ250.DRV from DEC works fine | 12 lines |
| 1142.4 | Sat Jan 25 1992 22:18 | This is a windows V2 problem. | 22 lines |
| 1142.7 | Tue Jan 28 1992 23:55 | You have to do SETUP I believe | 12 lines |
TOPIC | 1159.0 | MSwindows vs PCDECwindows |
| 1159.8 | Fri Jan 31 1992 22:38 | Not released yet from DEC but soon | 25 lines |
TOPIC | 1169.0 | Modifying Windows setup |
| 1169.4 | Tue Feb 04 1992 23:18 | Use SETUP.EXE in Windows | 8 lines |
TOPIC | 1175.0 | Display a 256 color bit map (.BMP) file in Windows ??? |
| 1175.1 | Mon Feb 03 1992 23:03 | WINGIF.ZIP ??? | 7 lines |
TOPIC | 1179.0 | WINDOWS AUTO SETUP
|
| 1179.2 | Wed Feb 05 1992 21:48 | Similar but a little different | 7 lines |
TOPIC | 1216.0 | WINDOWS & LA324 |
| 1216.1 | Tue Feb 18 1992 23:13 | You need the DEC printer drivers | 5 lines |
TOPIC | 1226.0 | How to change the default directory in Windows? |
| 1226.2 | Sun Feb 23 1992 00:11 | It need to be in your PATH statement, I think | 9 lines |
TOPIC | 1239.0 | Windows CAD Packages? |
| 1239.17 | Sat Jul 11 1992 22:30 | Comparing UGII to ACAD on a PC is not a true comparison | 24 lines |
TOPIC | 1285.0 | vt320/pcxag-ad/port/help |
| 1285.1 | Wed Mar 11 1992 23:55 | Some hints | 39 lines |
| 1285.3 | Sat Mar 14 1992 21:48 | Glad it helped | 4 lines |
TOPIC | 1304.0 | DEClaser2200 and EXCEL |
| 1304.3 | Fri Mar 20 1992 22:32 | Raise the printer timeouts ?? | 11 lines |
TOPIC | 1320.0 | HELP - WINDOWS V 3.0A HANGS IN ENHANCED MODE |
| 1320.1 | Tue Mar 24 1992 00:19 | Here's a few possibilities | 39 lines |
TOPIC | 1328.0 | Hanging DOS 5.0,Win 3.0, DECstation 316??? |
| 1328.6 | Sat Mar 28 1992 22:05 | | 8 lines |
TOPIC | 1347.0 | MS Windows V3.1 - From DEC!! (or, Why Do a Store a Favor??) |
| 1347.4 | Thu Apr 02 1992 01:23 | But I can buy DOS 5.0 Upgrade from them | 7 lines |
TOPIC | 1372.0 | 'Cannot run Windows because of video device conflict' |
| 1372.10 | Thu Apr 16 1992 23:32 | How about. | 30 lines |
TOPIC | 1380.0 | VAXMATE and WIN 3.1 |
| 1380.2 | Wed Apr 08 1992 22:49 | Only on a 386 or better I thought | 8 lines |
| 1380.8 | Fri Apr 10 1992 00:17 | Well 286 is ok too. | 13 lines |
TOPIC | 1399.0 | 3.1 Resource Kit |
| 1399.6 | Fri Apr 10 1992 23:56 | Credit card and FED-EX will get it for you | 6 lines |
TOPIC | 1463.0 | Win3.1 digital printer drivers on net |
| 1463.9 | Sun Apr 26 1992 23:45 | Problem with Win3.1, W4W 2.0 and DEC printer drivers | 40 lines |
| 1463.10 | Wed May 20 1992 00:18 | New PostScript driver solved the problem | 20 lines |
TOPIC | 1562.0 | Win 3.1 LJ250 Driver?? |
| 1562.5 | Wed May 20 1992 00:06 | Someone is looking in to it. | 15 lines |
TOPIC | 1755.0 | Printscreen from VT320 questions? |
| 1755.2 | Wed Jul 08 1992 01:20 | Try it in DEC mode with ANSI.SYS | 13 lines |
TOPIC | 1779.0 | WinWord and 2250 laser |
| 1779.1 | Wed Jul 08 1992 01:33 | Check the SETUP and memory configuration | 24 lines |
| 1779.3 | Wed Jul 08 1992 22:36 | Still sounds like a printer or que setup problem | 22 lines |
TOPIC | 1920.0 | W4W 2.0 Upgrade messes up my LJ252 printer |
| 1920.1 | Mon Aug 17 1992 23:20 | You need a new HP driver | 11 lines |
TOPIC | 1978.0 | DECLASER 2150 AND POWERPOINT |
| 1978.4 | Thu Sep 03 1992 01:05 | Increase the memory available | 18 lines |
TOPIC | 2001.0 | Can't start Windows 3.1 after installing RRD42 |
| 2001.3 | Sun Sep 06 1992 01:36 | Memory is the answer for me. | 15 lines |
TOPIC | 6.0 | Summagraphics Digitizers |
| 6.18 | Thu May 18 1989 13:54 | Works fine for me. | 12 lines |
TOPIC | 202.0 | LJ250/LA75 AS PRINTER/PLOTTERS ??? |
| 202.3 | Wed Feb 15 1989 13:19 | LJ250 plots B/W from RB | 14 lines |
| 202.4 | Thu Feb 16 1989 14:41 | HP Laser jet was B/W only | 15 lines |
TOPIC | 213.0 | Customizing AutoCad for mapping |
| 213.3 | Wed Apr 27 1988 12:21 | CUSTOM.MNU | 25 lines |
TOPIC | 229.0 | VS200-LVP16 Not to Scale |
| 229.1 | Thu May 12 1988 11:39 | RENDER uses Centimeters not INCHES unless told | 14 lines |
TOPIC | 238.0 | Tue May 31 1988 13:18 | ACAD -> VAXDOCUMENT WHAT'S THE BEST WAY?? | 16 lines |
| 238.1 | Tue Dec 13 1988 12:59 | Trailing blank lines at end of SIXEL file cause NEW PAGE (unwanted). | 335 lines |
TOPIC | 259.0 | Building architecture application |
| 259.5 | Thu Jul 14 1988 08:20 | Employee purchase might help | 41 lines |
TOPIC | 263.0 | Mon Jul 18 1988 13:45 | CADENCE AutoLISP diskettes | 17 lines |
| 263.2 | Mon Jul 18 1988 16:35 | Thanks | 10 lines |
| 263.6 | Mon Nov 21 1988 16:36 | Where did they end up ??? | 8 lines |
TOPIC | 264.0 | AutoSCRIPT |
| 264.1 | Wed Jul 20 1988 11:11 | V2.62 has a Postscript output already | 7 lines |
TOPIC | 271.0 | AutoCAD -> PostScript -> VAX DOCUMENT |
| 271.1 | Sun Jul 24 1988 22:35 | Is the resolution better/worse than LN03 | 12 lines |
TOPIC | 278.0 | Mouse/Tablet input problem for Acad/Interleaf |
| 278.1 | Tue Aug 02 1988 10:18 | Did you try the Interleaf DEC representative | 20 lines |
TOPIC | 279.0 | How to address the whole tablet ? |
| 279.1 | Wed Aug 03 1988 11:35 | ACAD space is smaller than VAX/VMS | 12 lines |
TOPIC | 316.0 | AutoCAD & VMS V5.x Rel Note |
| 316.1 | Tue Oct 18 1988 15:47 | Release notes from LAVC version AutoCAD V9. | 287 lines |
TOPIC | 324.0 | Long wide plots |
| 324.1 | Thu Oct 27 1988 10:02 | Should work directly just fine. | 17 lines |
TOPIC | 331.0 | A CAD tool question |
| 331.3 | Mon Nov 07 1988 14:41 | works fine | 4 lines |
TOPIC | 352.0 | Can I get sixel files from ACAD? |
| 352.3 | Thu Dec 22 1988 09:44 | LPS40 direction and size help needed | 31 lines |
TOPIC | 366.0 | Problems RENDERING a .UIS file for LPS40 output |
| 366.1 | Tue Jan 03 1989 16:52 | 'GRAY' ????? | 20 lines |
| 366.6 | Sat Jan 14 1989 08:03 | use ASCII for the file type | 10 lines |
TOPIC | 370.0 | Saving a AUTOCAD file using PCFS |
| 370.2 | Mon May 15 1989 11:08 | Some 'basic' questions | 11 lines |
| 370.4 | Mon May 15 1989 15:45 | Works on PCSA V2.1 and ACAD V10 | 21 lines |
| 370.6 | Thu Jun 01 1989 23:45 | Check note 448.2 | 5 lines |
TOPIC | 371.0 | Tue Jan 17 1989 14:04 | Need a switchbox for mouse and tablet | 17 lines |
TOPIC | 388.0 | ACAD on MS/DOS to VAXstation??? |
| 388.2 | Mon Feb 06 1989 09:41 | I thought anything past V9 was compatible | 16 lines |
TOPIC | 397.0 | Any calcomp 9100 out there? |
| 397.1 | Wed Mar 01 1989 12:43 | Don't have one, but try these... | 24 lines |
TOPIC | 404.0 | Comments on suitable plotters for AUTOCAD |
| 404.2 | Fri Feb 24 1989 23:34 | The HP line has always been fully supported | 35 lines |
TOPIC | 410.0 | ACAD sixel/VAXDOCUMENT problems |
| 410.1 | Wed Mar 08 1989 19:34 | Need to get rid of the extra <LF>,etc. | 343 lines |
TOPIC | 412.0 | Default Display Colors ?? |
| 412.1 | Sun Mar 12 1989 20:55 | It's in there or the release notes. | 13 lines |
TOPIC | 426.0 | VS2000 Config to Run AutoCAD |
| 426.3 | Mon Apr 03 1989 11:28 | Move the Ethernet board | 34 lines |
TOPIC | 431.0 | ACAD/Interleaf ADI driver status |
| 431.3 | Fri Apr 07 1989 12:12 | USe ADI and INTERL.c | 82 lines |
| 431.5 | Wed Apr 19 1989 18:12 | I'll ask the writer | 30 lines |
TOPIC | 439.0 | Rename Layer Names ?? |
| 439.1 | Wed Apr 19 1989 18:15 | Try RENAME | 7 lines |
TOPIC | 448.0 | ACAD/PCSA problem |
| 448.1 | Tue May 16 1989 11:54 | Please see notes 370 and 433 (this conference) | 20 lines |
TOPIC | 449.0 | Moving vertical & horizontal text |
| 449.2 | Thu May 18 1989 10:57 | OOOOPS misunderstood use of STYLE command | 14 lines |
TOPIC | 460.0 | What do you think of AutoCAD. |
| 460.4 | Sun Jun 04 1989 10:04 | AutoCAD is the only way to go for me | 36 lines |
| 460.7 | Tue Jun 06 1989 01:24 | support is third party | 38 lines |
TOPIC | 465.0 | keeping perspective using render to hp 7580 |
| 465.2 | Tue Jun 06 1989 01:36 | /SIZE= being used. | 21 lines |
TOPIC | 476.0 | Transfer files from Rainbow to GPX? |
| 476.1 | Wed Jun 21 1989 11:29 | DXFOUT , DXFIN | 26 lines |
TOPIC | 481.0 | Display crosshair jitter ? |
| 481.1 | Tue Jul 11 1989 11:49 | Baud rate / bit settings / parity | 17 lines |
TOPIC | 504.0 | VAX/PC Integration ACAD |
| 504.2 | Wed Aug 30 1989 12:09 | PCSA/KERMIT and AutoCAD are very compatible. | 33 lines |
TOPIC | 524.0 | Wed Oct 04 1989 15:04 | AutoCAD to SIXEL file ???? | 22 lines |
TOPIC | 527.0 | HOW DO WE ORDER ACAD??? |
| 527.4 | Thu Oct 26 1989 23:58 | There is also a media change charge. | 9 lines |
TOPIC | 531.0 | cross hair colors? |
| 531.3 | Mon Nov 20 1989 16:22 | CONFIG | 17 lines |
TOPIC | 539.0 | DSVXMATE HiRes Driver for Vaxmate ... again |
| 539.2 | Tue Nov 21 1989 10:40 | Try this | 8 lines |
TOPIC | 540.0 | WANTED: Hardware & Info. |
| 540.2 | Mon Nov 20 1989 16:17 | DIAL | 6 lines |
TOPIC | 547.0 | seting up a DraftMasterII ploter |
| 547.1 | Thu Dec 07 1989 12:15 | DIR/title="plot" | 6 lines |
TOPIC | 548.0 | tablet causing severe io load |
| 548.1 | Thu Dec 07 1989 14:56 | Use the DEC tablet. | 12 lines |
TOPIC | 559.0 | Extended Memory on 386... |
| 559.1 | Thu Dec 21 1989 15:23 | All by itself.... | 15 lines |
TOPIC | 561.0 | to plot or not to plot this is the que |
| 561.2 | Tue Dec 26 1989 14:34 | PLease use search... | 21 lines |
TOPIC | 572.0 | help with scanning plse |
| 572.2 | Sun Jan 21 1990 09:49 | use the tablet | 21 lines |
TOPIC | 579.0 | Autocad on non-DEC terminals |
| 579.2 | Thu Feb 01 1990 06:38 | You do need VWS NOT DECwindows | 22 lines |
TOPIC | 592.0 | Autocad ob Ultrix DECwindows |
| 592.3 | Sun Feb 25 1990 09:18 | HP Paintjet | 12 lines |
TOPIC | 609.0 | Moving ACAD to new machine? |
| 609.4 | Sun Mar 18 1990 11:52 | Atlanta will help | 19 lines |
| 609.6 | Mon Mar 19 1990 16:43 | OOOOOps | 19 lines |
TOPIC | 616.0 | Rearranging the pick buttons |
| 616.1 | Wed Mar 21 1990 10:56 | Several ways | 20 lines |
TOPIC | 631.0 | How do I get a Mouse? |
| 631.1 | Thu Apr 12 1990 22:08 | Get the tablet. | 23 lines |
TOPIC | 636.0 | CAD Sale Slipping Through My Fingers |
| 636.4 | Mon May 28 1990 23:00 | DECview3D will allow view only. | 8 lines |
TOPIC | 638.0 | Plot files to Benson electrostatic plotters |
| 638.1 | Fri Apr 27 1990 09:05 | Please be more specific | 23 lines |
TOPIC | 642.0 | Mailing ACAD drawings on DECnet |
| 642.3 | Mon May 07 1990 07:27 | Mail doesn't work | 16 lines |
TOPIC | 644.0 | Tue May 08 1990 08:46 | Problem with LVP16 and VAX 3500 | 23 lines |
| 644.2 | Wed May 09 1990 13:59 | I'l try the -D | 33 lines |
| 644.3 | Thu May 10 1990 17:43 | H8571-E and BC16E-25 work | 59 lines |
TOPIC | 653.0 | basic HPGL question |
| 653.1 | Thu Jun 14 1990 22:26 | Sounds like it should work | 13 lines |
TOPIC | 655.0 | VS2000 to VS3100 & plotter |
| 655.1 | Tue Jun 19 1990 12:04 | H8571-E and BC16E-25 | 16 lines |
TOPIC | 662.0 | Drawing Mgmt Package for Autocad |
| 662.3 | Sun Jul 15 1990 23:27 | I recommend EDCS, AutoCAD and PCSA. Did it once before | 23 lines |
TOPIC | 672.0 | 19in. monitor for DS325 ? |
| 672.1 | Fri Aug 10 1990 23:09 | NO there is no DEC 19" monitor YET... | 26 lines |
TOPIC | 675.0 | ACAD WITH DS333 RUNS VERY SLOW |
| 675.1 | Tue Aug 14 1990 11:04 | Sounds like STYLE is DRAWING the letters | 43 lines |
TOPIC | 678.0 | PCSA/plot file corruption problem |
| 678.5 | Mon Sep 17 1990 22:56 | What versions of PCSA ? | 17 lines |
TOPIC | 797.0 | VSXXX/DS5000/AutoCAD--HELP! |
| 797.1 | Wed Aug 14 1991 23:15 | Ask ADESK, they may be able to resurrect one. | 10 lines |
TOPIC | 2.0 | Introductory Note |
| 2.269 | Wed Aug 02 1989 11:19 | Off-load some functions | 4 lines |
| 2.356 | Mon Jul 16 1990 22:07 | MEIS in Tewksbury | 12 lines |
TOPIC | 22.0 | DECstations and RZ disks |
| 22.25 | Wed Aug 28 1991 00:16 | Still no luck | 23 lines |
| 22.33 | Sun Sep 01 1991 11:55 | I went to just 2 drives but.. | 35 lines |
| 22.35 | Mon Sep 02 1991 10:45 | I forgot about TANDY shortcomings. | 11 lines |
| 22.36 | Tue Sep 03 1991 13:14 | Some things to try.. | 36 lines |
| 22.37 | Fri Oct 11 1991 00:43 | To clarify. | 48 lines |
| 22.39 | Fri Oct 11 1991 11:49 | Thanks | 12 lines |
| 22.40 | Wed Oct 23 1991 01:40 | I can't use EMM386 and ASPI stiff together | 32 lines |
| 22.43 | Thu Oct 24 1991 12:21 | Answers and more info | 53 lines |
| 22.46 | Thu Oct 24 1991 23:40 | Still looking to get it right | 30 lines |
| 22.47 | Tue Nov 19 1991 10:14 | A little further | 23 lines |
TOPIC | 26.0 | DECstations 210/316/320 questions |
| 26.24 | Thu Oct 17 1991 14:48 | keyboards for the older PC's | 6 lines |
TOPIC | 40.0 | DECstations and the LK250 Keyboard |
| 40.5 | Fri Sep 08 1989 13:31 | Order either one of these ... | 14 lines |
TOPIC | 60.0 | DEC Printers on DECstations |
| 60.12 | Sat Nov 24 1990 16:57 | New version of LaserTwin just for LN05/6 | 13 lines |
| 60.19 | Wed Jan 02 1991 22:05 | Sounds good to me | 6 lines |
| 60.21 | Mon Jan 07 1991 22:45 | OOOOOPs | 8 lines |
| 60.24 | Wed Feb 27 1991 22:38 | IRQ conflict ??? | 18 lines |
TOPIC | 67.0 | Mix and Match Memory? |
| 67.2 | Fri Oct 13 1989 10:25 | Can I add a second PC42M-AA board ?? | 21 lines |
TOPIC | 156.0 | MEMORY SIMMs Problem?? |
| 156.7 | Thu Aug 24 1989 14:31 | How does it see the extra mem | 15 lines |
TOPIC | 173.0 | QuarterDeck, PCSA, and DECstation 316?? |
| 173.3 | Tue May 15 1990 22:09 | My V5.0 doesn't work either. | 11 lines |
TOPIC | 227.0 | SCSI TARGET 0 NOT FOUND? |
| 227.33 | Fri Sep 15 1989 10:48 | That *&^%# cable | 21 lines |
| 227.55 | Fri Oct 27 1989 00:35 | Cable being scraped by cover | 28 lines |
| 227.104 | Thu Dec 21 1989 13:19 | Try the RED reset button | 13 lines |
| 227.130 | Mon Feb 12 1990 23:16 | Similar clock chip problem | 14 lines |
TOPIC | 238.0 | 316 1MB Question ? |
| 238.28 | Thu Jan 18 1990 09:33 | See note 204 also | 3 lines |
TOPIC | 266.0 | DECstations, Rainbows, and RX50DRVR.SYS |
| 266.4 | Sun Mar 10 1991 09:57 | look in the manuals that came with it. | 11 lines |
TOPIC | 282.0 | DEMM/QEMM with DS210 ?? |
| 282.5 | Mon Apr 23 1990 14:13 | QEMM 50/60 available DECdirect | 13 lines |
TOPIC | 359.0 | trouble installing Fastback+ on DS320 |
| 359.5 | Wed Oct 04 1989 14:15 | VAXmate trouble too. | 21 lines |
| 359.13 | Thu Oct 12 1989 16:49 | What version of FASTBACK and VAXmate | 14 lines |
TOPIC | 360.0 | DECmouse on VGA??? |
| 360.5 | Wed Dec 13 1989 12:30 | Is there a new DEPMOUSE.DRV ? | 5 lines |
TOPIC | 368.0 | Mon Oct 09 1989 11:36 | Need LK250/IBM cable for internal use | 22 lines |
| 368.2 | Thu Oct 12 1989 10:43 | It IS available. Surprise, surprise | 15 lines |
| 368.4 | Thu May 30 1991 18:37 | Yes and NO | 25 lines |
TOPIC | 397.0 | Thu Nov 02 1989 13:57 | Tablet/mouse interchangeability ??? | 26 lines |
TOPIC | 407.0 | File transfer |
| 407.3 | Tue Nov 07 1989 11:04 | PCSA or FAL would work | 17 lines |
TOPIC | 409.0 | Tue Nov 07 1989 10:52 | HELP I lost my cursor | 18 lines |
| 409.2 | Thu Nov 09 1989 13:22 | I found my cursor | 18 lines |
TOPIC | 424.0 | Printer switching |
| 424.3 | Mon Nov 27 1989 21:31 | PLease say the same thing to support... but positively. | 19 lines |
TOPIC | 432.0 | DECstation 320 via IEG??? |
| 432.1 | Wed Nov 29 1989 09:39 | Can't get them at all | 14 lines |
TOPIC | 458.0 | Fri Dec 29 1989 15:46 | 16-bit VGA cards. Useful or not ? | 16 lines |
| 458.10 | Thu Feb 01 1990 13:34 | Super VGA in DS316SX | 7 lines |
TOPIC | 477.0 | Thu Jan 18 1990 10:37 | IS there software to read MAC floppies ? | 13 lines |
TOPIC | 479.0 | VGA graphics board in DECstation 316? |
| 479.2 | Thu Jan 18 1990 13:29 | In DECDirect | 7 lines |
TOPIC | 482.0 | Int 6D on 16 bit DEC VGA? |
| 482.3 | Mon Jan 29 1990 10:33 | And the answer is ... | 4 lines |
TOPIC | 484.0 | Memeory question on PC325c! |
| 484.9 | Wed Jan 24 1990 13:06 | DS316sx MAX memory Is it 4MB ?? | 11 lines |
TOPIC | 485.0 | DEPCA Help Needed |
| 485.6 | Mon Feb 04 1991 20:42 | Use IRQ5 for the DEPCA | 8 lines |
TOPIC | 502.0 | Technical Explaination of E000 and DEPCA Interactions, Please |
| 502.7 | Tue Feb 06 1990 16:06 | Then ther's not enough memory to LOADHI | 25 lines |
| 502.9 | Sun Feb 11 1990 23:17 | And the lights went on... | 18 lines |
TOPIC | 522.0 | Portable 386 LCD |
| 522.1 | Thu Feb 15 1990 14:08 | Sharp ?? | 6 lines |
TOPIC | 524.0 | Thu Feb 15 1990 14:16 | Composite output from Paradise VGA 16-bit ?? | 16 lines |
| 524.2 | Mon Feb 26 1990 11:38 | No composite | 8 lines |
TOPIC | 541.0 | ds212lp vga resolutions |
| 541.2 | Thu Mar 01 1990 12:25 | An the industry standard name please ? | 10 lines |
TOPIC | 562.0 | DEC mouse really MS Mouse? |
| 562.9 | Mon Apr 02 1990 22:26 | You nedd DEPMOUSE.DRV | 17 lines |
| 562.11 | Tue Apr 03 1990 20:51 | OOOOPS Thanks for correcting me | 10 lines |
TOPIC | 566.0 | LJ250 or LJ252 ??? |
| 566.4 | Sun Mar 18 1990 11:59 | Only one connection at a time. | 11 lines |
TOPIC | 573.0 | Decpa/Microsoft Problems??? |
| 573.2 | Thu Mar 22 1990 11:18 | Use DEPMOUSE.DRV and SETUP of windows. | 27 lines |
TOPIC | 582.0 | COM3/4 support on DECstation 320 |
| 582.6 | Sun Aug 05 1990 22:27 | How about the new 2400 baud DEC modem ? | 29 lines |
TOPIC | 587.0 | Wed Mar 28 1990 13:19 | VT320.exe takes a lot of memory | 36 lines |
TOPIC | 592.0 | LN03R on COM1 won't work!! 325C pc |
| 592.12 | Fri May 18 1990 23:42 | Isn't that an -E | 11 lines |
TOPIC | 601.0 | Decstation Monitor Stinks |
| 601.8 | Sun Aug 05 1990 10:38 | What are the part numbers please | 10 lines |
TOPIC | 602.0 | DS316, can't print from MSWindows, can from DOS
|
| 602.3 | Tue Apr 17 1990 11:48 | Try swapping connections in the back | 16 lines |
TOPIC | 604.0 | Multimedia and Animation on DECstations |
| 604.3 | Mon Apr 09 1990 12:07 | CGA on old and VGA on new ones. | 21 lines |
| 604.5 | Tue Apr 10 1990 11:44 | Converter ??? | 5 lines |
TOPIC | 619.0 | AUTOCAD |
| 619.1 | Sun Apr 15 1990 00:08 | It should have worked fine with the DEC board | 41 lines |
TOPIC | 640.0 | PROBLEM ADDING SCSI TAPE DRIVE ON DECSTSTAION |
| 640.4 | Tue Jul 03 1990 00:25 | Tape drive help needed | 36 lines |
| 640.6 | Fri Jul 06 1990 13:36 | Works now | 15 lines |
| 640.8 | Mon Jul 09 1990 15:09 | Not ny own .... | 10 lines |
TOPIC | 641.0 | Tue May 01 1990 12:38 | Memory Parity Interrupt at 16AC:006E. | 28 lines |
| 641.3 | Tue May 01 1990 22:48 | Cold usually. Sounds heat sensitive | 22 lines |
TOPIC | 666.0 | Video Bios Bug???? |
| 666.2 | Fri May 18 1990 23:29 | Does MOUSE.COM work | 17 lines |
TOPIC | 668.0 | PC4XS-AA mouse questions |
| 668.11 | Fri May 25 1990 12:27 | Old vs New use different methods | 30 lines |
TOPIC | 678.0 | HELP! RZ drives on DSxxx |
| 678.13 | Fri Oct 11 1991 00:13 | Wait 60 seconds then warm boot. | 8 lines |
TOPIC | 687.0 | Wed May 30 1990 15:00 | Need a serial 9-pin mouse. | 27 lines |
TOPIC | 697.0 | Trouble with MS WORKS |
| 697.4 | Tue Jun 05 1990 23:05 | You could use a serial mouse. | 19 lines |
TOPIC | 703.0 | MD300 scanner with PC's? |
| 703.3 | Tue Sep 11 1990 17:16 | The number is .. | 13 lines |
TOPIC | 709.0 | Wed Jun 06 1990 22:37 | MS-DOS 4.01 doesn't install for me | 55 lines |
| 709.2 | Thu Jun 07 1990 08:14 | I'll try that | 14 lines |
| 709.6 | Tue Jun 12 1990 12:00 | I got it to format | 17 lines |
TOPIC | 721.0 | Windows v3 thinks the 325 is an 8086? |
| 721.5 | Sun Jun 17 1990 22:16 | YEp, ENHANCED mode is non-DEPCA. | 21 lines |
TOPIC | 722.0 | need to see a 316+ immediately |
| 722.1 | Sun Jun 17 1990 22:23 | | 13 lines |
TOPIC | 732.0 | The part number note |
| 732.15 | Sun Jan 27 1991 21:32 | Try the PCSG hotline | 20 lines |
TOPIC | 761.0 | Table Digitizer |
| 761.1 | Sun Jul 08 1990 22:13 | Sure, what software ? | 16 lines |
TOPIC | 765.0 | SCSI & 5.25 FDD? |
| 765.2 | Mon Jul 16 1990 15:00 | Does the 316sx support IDE ? | 10 lines |
TOPIC | 809.0 | 325c/320 hard disk sharing? |
| 809.1 | Sun Aug 05 1990 10:56 | Need to backup and reformat | 18 lines |
TOPIC | 820.0 | Wed Aug 08 1990 23:23 | Hints for Windows V3. Also posted in PCSA 1300.50,.52 | 124 lines |
| 820.2 | Thu Aug 09 1990 11:57 | Location of new paradise VGA drivers for WinV3 | 23 lines |
TOPIC | 828.0 | Tue Aug 14 1990 11:25 | Need option slides for DS325c system | 18 lines |
TOPIC | 835.0 | DECstation 316+ Keyboard Error |
| 835.1 | Fri Aug 17 1990 22:20 | You blew the little NON-replaceable fuse. | 21 lines |
TOPIC | 854.0 | Adding a tape to full box |
| 854.1 | Tue Aug 28 1990 22:41 | Nope, it won't fit in the box | 19 lines |
| 854.3 | Sun Sep 02 1990 10:13 | You'll need a tower/power and cable. | 47 lines |
| 854.5 | Tue Sep 04 1990 16:50 | Mine was a 1542A or maybe the book is too old. | 11 lines |
| 854.7 | Wed Sep 05 1990 10:55 | Maybe I read it wrong. | 4 lines |
TOPIC | 876.0 | Help! ACAD/DS316/VSXXX-AB |
| 876.2 | Mon Sep 10 1990 10:32 | Nope it does NOT work. | 33 lines |
TOPIC | 878.0 | XONXOFF and a LA75 |
| 878.8 | Sat Sep 15 1990 23:27 | You need the -J | 10 lines |
| 878.10 | Mon Sep 17 1990 14:30 | True. Custom will work for the -B | 14 lines |
TOPIC | 921.0 | NET Drives Lost after ACAD Startup |
| 921.2 | Mon Sep 24 1990 21:55 | I agree QEMM is getting you. | 13 lines |
| 921.4 | Thu Sep 27 1990 11:41 | At first glance | 37 lines |
| 921.7 | Thu Sep 27 1990 21:40 | I don't have V5 of QEMM | 11 lines |
TOPIC | 924.0 | Serial number on its #$%* |
| 924.1 | Wed Sep 26 1990 21:51 | Use printed labels | 19 lines |
| 924.3 | Sun Sep 30 1990 10:40 | Mine has an extra '1' in the number | 13 lines |
| 924.5 | Sun Sep 30 1990 21:19 | I knew there was a good reason. | 6 lines |
TOPIC | 930.0 | DECstation monitor PC4XV-B2 parts needed. |
| 930.2 | Tue Oct 02 1990 16:26 | Call the PCSG hotline | 7 lines |
TOPIC | 933.0 | Help needed to find software part numbers... |
| 933.1 | Tue Oct 02 1990 13:10 | They are in there | 13 lines |
TOPIC | 934.0 | 2nd Serial Board Configuration Problem |
| 934.2 | Wed Oct 03 1990 15:13 | Set the m up correctly but use MODE | 37 lines |
| 934.10 | Thu Aug 15 1991 23:54 | IRQ conflict ?? | 17 lines |
| 934.14 | Sat Aug 17 1991 22:53 | Lets review the hardware | 50 lines |
TOPIC | 947.0 | Bus Mouse/internal modem??? |
| 947.1 | Thu Oct 11 1990 22:51 | I'd try the IRQ's | 13 lines |
TOPIC | 948.0 | Problem with 386 software on 333c |
| 948.3 | Fri Oct 12 1990 19:38 | Could a TSR be getting in the way ? | 26 lines |
| 948.7 | Sun Oct 28 1990 20:46 | Where are you located ? | 21 lines |
TOPIC | 971.0 | PC402-Can Do? |
| 971.4 | Wed Oct 24 1990 11:33 | Use the MS BUS mouse from DECdirect | 10 lines |
| 971.7 | Wed Oct 24 1990 21:39 | Not a serial port but an IRQ | 8 lines |
TOPIC | 982.0 | PC4XL-BB errors |
| 982.1 | Sun Oct 28 1990 20:35 | I got it when I blew the power fuse | 7 lines |
| 982.4 | Mon Oct 29 1990 20:38 | Shake, rattle and roll | 18 lines |
TOPIC | 992.0 | DS320/Windows in Enhanced Mode? |
| 992.1 | Tue Nov 06 1990 20:39 | Not til at least Jan 1991 and probably later according to notes | 15 lines |
TOPIC | 995.0 | Wed Nov 07 1990 11:20 | I need the MODtap H8571-J conn. | 20 lines |
| 995.2 | Tue Nov 20 1990 22:19 | Thanks, none so far | 5 lines |
TOPIC | 1016.0 | 2400b Modem - Whos Is It? |
| 1016.4 | Wed Nov 21 1990 21:50 | A brief physical description please | 9 lines |
TOPIC | 1028.0 | Decstation 3xx series Upgrades? |
| 1028.13 | Wed May 22 1991 11:36 | External customers only for $ 3995.00 | 19 lines |
TOPIC | 1031.0 | DECmouse and DECstation w/o DEPCA |
| 1031.2 | Thu Nov 29 1990 16:22 | Use a serial mouse from Radio Shack or DDD | 10 lines |
| 1031.6 | Sat Dec 01 1990 23:29 | Repairs usually take 2-5 days from IHFS. | 30 lines |
TOPIC | 1033.0 | HELP connecting to VAX |
| 1033.1 | Mon Dec 03 1990 10:53 | How about some more info ? | 23 lines |
TOPIC | 1057.0 | no more DOS V3.3 (PC4XQ-AA)? |
| 1057.3 | Sun Dec 16 1990 08:52 | Book has some problems. | 4 lines |
TOPIC | 1108.0 | External SCSI devices on DECSTATION 320 ? |
| 1108.7 | Mon Aug 12 1991 00:11 | Continuing saga.. | 18 lines |
| 1108.9 | Tue Aug 13 1991 00:53 | You are correct but they have a new one I guess | 23 lines |
TOPIC | 1116.0 | SCSI and IDE Co-Habitation |
| 1116.6 | Mon Jan 28 1991 23:53 | Works for me | 14 lines |
| 1116.9 | Wed May 29 1991 21:31 | Windows will have a drive letter problem | 19 lines |
TOPIC | 1118.0 | ....DECLaser 2100.... |
| 1118.2 | Tue Jan 29 1991 00:04 | I use the CaPSL cartridge very successfully | 22 lines |
TOPIC | 1154.0 | 5 1/4 floppy disk change please |
| 1154.1 | Thu Feb 14 1991 20:53 | Try the cable | 10 lines |
TOPIC | 1172.0 | windows on 316 no go |
| 1172.3 | Mon Feb 25 1991 12:35 | How about ?? | 24 lines |
TOPIC | 1192.0 | 80387 removal tool part number ? |
| 1192.2 | Thu Mar 07 1991 00:08 | OK for one style but not the co-processor | 18 lines |
TOPIC | 1193.0 | What's Wrong Autoexec.bat |
| 1193.1 | Thu Mar 07 1991 00:11 | IRQ conflict or int address conflict | 9 lines |
TOPIC | 1196.0 | can this be done and if so how |
| 1196.1 | Thu Mar 07 1991 00:18 | Usually, NO | 21 lines |
TOPIC | 1204.0 | Fri Mar 08 1991 22:30 | Need an external SCSI box | 31 lines |
TOPIC | 1218.0 | Mon Mar 18 1991 21:24 | DE200 and DS316sx problem | 16 lines |
| 1218.2 | Thu Mar 21 1991 01:14 | fThis worked for 2 of the 5. | 19 lines |
TOPIC | 1221.0 | VGA confusion HELP!! |
| 1221.5 | Thu Mar 21 1991 21:41 | How about DEC's 19" monitor ??? | 9 lines |
TOPIC | 1231.0 | Overhead projection part no request |
| 1231.4 | Tue Apr 02 1991 23:50 | Sharp and a few others make them | 12 lines |
TOPIC | 1261.0 | Wed Apr 17 1991 11:44 | Problem with 8514a card and Windows V3 | 30 lines |
| 1261.1 | Wed Apr 17 1991 14:03 | More info on configuration. | 44 lines |
| 1261.2 | Tue Apr 23 1991 18:10 | More inf but still no solution. | 85 lines |
| 1261.3 | Fri May 03 1991 00:39 | Any ody got any ideas ? | 4 lines |
| 1261.4 | Wed May 22 1991 11:36 | Now SHOW doesn't work | 24 lines |
| 1261.5 | Mon Jun 10 1991 22:05 | Is it the BIOS address ?? | 16 lines |
| 1261.6 | Thu Jun 13 1991 11:52 | No mouse movemenmt now | 23 lines |
| 1261.8 | Mon Jun 17 1991 14:55 | I'll try it. | 3 lines |
| 1261.11 | Wed Jun 19 1991 14:17 | YEAAAAHHHH | 10 lines |
TOPIC | 1319.0 | PC time installation |
| 1319.1 | Thu May 16 1991 21:53 | After the first few it goes much faster | 27 lines |
TOPIC | 1344.0 | Rolling Demo for DECpc433 ? |
| 1344.1 | Mon Jun 03 1991 21:23 | Ad is in PC magazine | 9 lines |
TOPIC | 1353.0 | HELP NEEDED AUTOCAD and DS320+ |
| 1353.1 | Sun Jun 09 1991 22:05 | Memory, Disk, etc. ?? | 13 lines |
TOPIC | 1356.0 | Sun Jun 09 1991 22:12 | CF001-AA uses SCSI but I already have a SCSI interface | 13 lines |
| 1356.3 | Mon Jun 10 1991 14:47 | More info. | 33 lines |
TOPIC | 1373.0 | Is SCSIHA.SYS required with DOS5/SMARTDRV? |
| 1373.2 | Fri Sep 06 1991 01:49 | But it conflicts with ADAPTEC drivers | 15 lines |
| 1373.4 | Fri Sep 06 1991 10:54 | Thanks | 4 lines |
TOPIC | 1377.0 | SCSIHA.SYS |
| 1377.5 | Sun Nov 03 1991 23:42 | Post a draft and we'll help refine it. | 23 lines |
TOPIC | 1399.0 | DUAL screen workstation (Intel chip based) |
| 1399.1 | Tue Jun 25 1991 15:43 | | 9 lines |
TOPIC | 1404.0 | Wed Jun 26 1991 15:23 | How about a DEC 19" monitor for the DS325c and 8514A | 20 lines |
| 1404.2 | Thu Jun 27 1991 16:55 | That sounds like a yes to me but.. | 8 lines |
| 1404.4 | Sat Jun 29 1991 00:01 | Thanks | 5 lines |
| 1404.7 | Sun Jul 14 1991 10:58 | Thanks | 3 lines |
| 1404.11 | Tue Jul 16 1991 12:45 | Doesn't seem to answer the original question | 12 lines |
| 1404.13 | Tue Aug 06 1991 22:29 | Thanks | 16 lines |
| 1404.22 | Fri Jan 10 1992 09:42 | VRT19 vs VR320 questions | 10 lines |
| 1404.24 | Sat Jan 11 1992 00:08 | Thanks | 6 lines |
| 1404.26 | Wed Mar 04 1992 22:05 | PCXAG-AD hangs windows V3 | 26 lines |
| 1404.28 | Thu Mar 05 1992 15:03 | It works.. Sort of... | 22 lines |
| 1404.31 | Sat Mar 07 1992 23:09 | I'll try it. | 4 lines |
TOPIC | 1425.0 | MS-Excel PC/Mac interaction? |
| 1425.1 | Tue Jul 09 1991 11:04 | Sounds like MS problem not PC | 8 lines |
TOPIC | 1480.0 | Mon Jul 29 1991 18:39 | Help with second SCSI on external connector of PC4XR-CC | 30 lines |
| 1480.2 | Tue Jul 30 1991 00:24 | All DEC equipment. SCSI from DIAL Cust return | 8 lines |
| 1480.3 | Tue Jul 30 1991 00:46 | Tried Spin-up via jumpers | 11 lines |
| 1480.6 | Tue Jul 30 1991 13:44 | I kluged a power box | 16 lines |
| 1480.9 | Tue Jul 30 1991 19:06 | Only 2 disks per SYSTEM apparently | 20 lines |
| 1480.11 | Tue Jul 30 1991 19:33 | OOOPS | 5 lines |
| 1480.13 | Wed Jul 31 1991 12:23 | Sounds like ADAPTEC has us on the dirvers | 15 lines |
TOPIC | 1513.0 | enhanced windows on a 316? |
| 1513.3 | Thu Aug 08 1991 22:27 | You also need the mouse driver | 14 lines |
TOPIC | 1555.0 | RRD42/Sony CDU-541 & Windows |
| 1555.10 | Tue Oct 01 1991 00:58 | Try ADPATEC | 14 lines |
| 1555.18 | Sat Mar 28 1992 21:45 | How about ... | 29 lines |
TOPIC | 1562.0 | autocad v.10 pathworks v4.0 |
| 1562.1 | Sun Sep 01 1991 12:03 | Are you using the memory management stuff from ACAD | 12 lines |
TOPIC | 1575.0 | Defeat 325c key lock? |
| 1575.8 | Tue Sep 10 1991 22:52 | And in what state are you ?? | 5 lines |
TOPIC | 1579.0 | Adding second harddisk to PC |
| 1579.2 | Mon Sep 09 1991 23:15 | If you are using MS-DOS V4.01 or V5 | 13 lines |
TOPIC | 1624.0 | Memory upgrade<>modem works |
| 1624.3 | Tue Oct 01 1991 02:09 | A few suggestions | 27 lines |
TOPIC | 1675.0 | VR297 Monitor |
| 1675.2 | Mon Oct 21 1991 14:05 | Is there a 3rd party card to drive the monitor ? | 13 lines |
| 1675.4 | Wed Oct 23 1991 01:22 | Just wanted to be sure. | 11 lines |
| 1675.6 | Thu Oct 24 1991 12:24 | Thanks | 5 lines |
TOPIC | 1706.0 | DECstation 60-Day Lead-time??????? |
| 1706.1 | Sun Oct 27 1991 23:29 | The proper expectation whether we like it or not | 15 lines |
TOPIC | 1725.0 | Horror story |
| 1725.2 | Thu Nov 07 1991 16:25 | 1-800-DIGITAL should have done it all..... | 21 lines |
TOPIC | 1737.0 | Sound Blaster and IRQ |
| 1737.9 | Tue Nov 12 1991 13:14 | LPT2 is on the add-on board ONLY | 13 lines |
TOPIC | 1740.0 | RRD42-GA questions... |
| 1740.6 | Sun Dec 15 1991 10:18 | | 12 lines |
| 1740.8 | Sun Dec 15 1991 23:15 | Jim is excellent at his job | 12 lines |
TOPIC | 1756.0 | Using DEC digitizing board on DECSTATION PC ? |
| 1756.1 | Sun Nov 17 1991 12:06 | The answer is NO | 9 lines |
TOPIC | 1773.0 | Current PC Software List From DEC? |
| 1773.2 | Wed Nov 20 1991 22:02 | Look for changes to come inth enear future | 23 lines |
TOPIC | 1802.0 | Toshiba CDROM Host Adapter? |
| 1802.5 | Thu Dec 05 1991 22:16 | Both have a segment based on price. | 41 lines |
TOPIC | 1822.0 | RZ55/RZ56 SCSI disks on 433W |
| 1822.3 | Sun Dec 15 1991 10:26 | BP-00008-63 RZ Spinup from SSB | 6 lines |
TOPIC | 1828.0 | Spec's on the PCXCV-B2 monitor? |
| 1828.5 | Sun Dec 15 1991 10:28 | | 6 lines |
TOPIC | 1849.0 | Information From ADAPTEC |
| 1849.3 | Fri Jan 03 1992 19:34 | If only one cable, you still need the terminators | 12 lines |
TOPIC | 1852.0 | LJ252/Windows problem |
| 1852.2 | Fri Dec 27 1991 20:54 | How about ?/ | 30 lines |
TOPIC | 1864.0 | Mounting PC4XR-FA in 5.25 slot |
| 1864.2 | Fri Jan 03 1992 19:24 | Need more info | 17 lines |
TOPIC | 1919.0 | bus mouse card for PCXAS-AA? |
| 1919.2 | Sat Feb 15 1992 21:28 | MS bus mouse works fine | 5 lines |
TOPIC | 1937.0 | 316sx Disk Add On |
| 1937.2 | Sat Jan 25 1992 22:03 | Change disks toa larger one | 6 lines |
TOPIC | 1950.0 | Tue Jan 28 1992 23:50 | Does the PC4XG-BA (8514/a) work with teh PC4XG-AC ?? | 11 lines |
TOPIC | 1951.0 | SVGA ADAPTER PC4XG-AD..ANY PROBLEMS |
| 1951.4 | Fri Mar 27 1992 16:09 | See note 1404.xx | 5 lines |
TOPIC | 1953.0 | ADAPTEC 1540b not seeing partitions |
| 1953.10 | Sun Feb 23 1992 00:01 | The B has an external SCSi connector on the back plate | 9 lines |
TOPIC | 1956.0 | Trouble with WIN3X0 drivers in DECpc 333c |
| 1956.1 | Fri Jan 31 1992 22:13 | -AC floppy and its drivers | 15 lines |
TOPIC | 1963.0 | 2 1540B, is that one too many? |
| 1963.1 | Fri Jan 31 1992 22:20 | Why 2 adapters and not more software from ADPATEC ? | 14 lines |
| 1963.6 | Mon Feb 03 1992 22:50 | How about the new OS/2 ?? | 8 lines |
TOPIC | 1979.0 | 210/DEPCA/pathworks printing? |
| 1979.1 | Sun Feb 09 1992 21:10 | IRQ conflict is the problem | 28 lines |
| 1979.3 | Mon Feb 10 1992 21:24 | Why are you calling me names ??? | 8 lines |
| 1979.7 | Tue Feb 11 1992 23:24 | IRQ's a nightmare on PC street | 51 lines |
TOPIC | 2036.0 | DS320 memory problems/questions?? |
| 2036.5 | Thu Feb 27 1992 01:08 | Set it to 640 and 1024 and see what happens | 22 lines |
TOPIC | 2100.0 | Seeing is believing!! |
| 2100.2 | Wed Mar 18 1992 22:16 | Caveat Emptor | 7 lines |
TOPIC | 2109.0 | Focusing problems with PCXCV-B2? |
| 2109.1 | Wed Mar 25 1992 20:34 | I got one too. | 9 lines |
TOPIC | 2123.0 | PCXAG-AD problems with NEC 5FG |
| 2123.4 | Fri Mar 27 1992 16:14 | I had a bad card. | 10 lines |
| 2123.6 | Mon Mar 30 1992 23:50 | OK | 6 lines |
| 2123.8 | Thu Apr 02 1992 00:58 | I'll look | 10 lines |
| 2123.9 | Thu Apr 02 1992 01:11 | How about ?? | 14 lines |
TOPIC | 2124.0 | fax to pc |
| 2124.3 | Fri Mar 27 1992 16:25 | DECdirect has it now | 14 lines |
TOPIC | 2126.0 | MS Windows V3.1 - From DEC!! (or, Why Do a Store a Favor??) |
| 2126.4 | Thu Apr 02 1992 01:15 | Call MS direct | 7 lines |
TOPIC | 2128.0 | PCXAG-AC (Super VGA) question or two? |
| 2128.6 | Thu Apr 02 1992 00:51 | 20% higher sounds like the NEW DEC policy | 32 lines |
TOPIC | 2138.0 | Does SYTOS Plus run on PC4XT-AA? |
| 2138.1 | Thu Apr 02 1992 01:19 | Works just fine. | 5 lines |
TOPIC | 2163.0 | VGA1024 board+VGA1024 Monitor=800X600X16max |
| 2163.3 | Fri Apr 10 1992 00:10 | What are teh part #'s | 15 lines |
| 2163.6 | Fri Apr 10 1992 23:44 | Try EMMexclude in SYSTEM.ini | 14 lines |
TOPIC | 2181.0 | SCSI TARGET 1 NOT FOUND? |
| 2181.8 | Tue May 19 1992 23:55 | Use a second but inexpensive disk to fool the BIOS | 20 lines |
TOPIC | 2217.0 | 325c to 425c updgrade..is it easily doable! |
| 2217.9 | Mon May 11 1992 23:04 | Upgrade = Replacement | 19 lines |
TOPIC | 2227.0 | DECSTN DOS 5 & Complete FAX INCOMPATIBLE |
| 2227.4 | Sun May 03 1992 22:26 | Address or IRQ conflict should be the problem | 9 lines |
TOPIC | 2259.0 | Higher productivity with better graphics? |
| 2259.4 | Wed May 20 1992 00:00 | Order the PCXAG-AD | 15 lines |
TOPIC | 2329.0 | 20" Monitor with non-DECpcs |
| 2329.2 | Fri Jun 05 1992 22:50 | It should work for you and it supports several frequencies | 16 lines |
| 2329.5 | Wed Jun 10 1992 14:25 | From the manual P 14 | 27 lines |
TOPIC | 2339.0 | Thu Jun 04 1992 22:52 | DECwand light keeps going out | 17 lines |
TOPIC | 2430.0 | CDROM & regular SCSI board??? |
| 2430.6 | Mon Jun 29 1992 23:05 | Do we have any DDD part numbers ? | 6 lines |
TOPIC | 2439.0 | 320sx mounting hardware? |
| 2439.2 | Mon Jun 29 1992 23:16 | I have some if you need them | 9 lines |
TOPIC | 2446.0 | adding a 3rd external disk to a PC4XR-CC? |
| 2446.1 | Mon Jun 29 1992 23:27 | You need special drivers for a third disk | 11 lines |
TOPIC | 2464.0 | 14" Multi-Sync Color Monitor fuzzy? |
| 2464.1 | Wed Jul 01 1992 22:54 | Sometimes they need a F/S adjustment | 20 lines |
TOPIC | 2501.0 | Big disk on DECSTATION 320 ? |
| 2501.8 | Wed Jul 22 1992 21:59 | The procedure is ... | 31 lines |
TOPIC | 2525.0 | MD30C Color Scanner |
| 2525.6 | Fri Jul 17 1992 01:32 | Mine doesn't work either | 21 lines |
| 2525.8 | Thu Jul 23 1992 11:24 | It says to disable the SCSI Bios | 9 lines |
| 2525.9 | Thu Jul 23 1992 15:17 | Use PRE-SCAN first, then SELECT an area | 16 lines |
TOPIC | 2603.0 | DECstation 320 and 120MB IDE configuration |
| 2603.5 | Wed Aug 05 1992 22:53 | It's down there | 20 lines |
TOPIC | 2753.0 | TheCompleteCommunicator / disable com port / BitCom |
| 2753.1 | Sun Sep 06 1992 01:17 | Usually COM2 is on a second Serial/Parallel board | 12 lines |
| 2753.3 | Sun Sep 06 1992 17:41 | Check the phone connection | 32 lines |
| 2753.6 | Wed Sep 09 1992 00:25 | OOOPS, well it works for the 386 systems | 8 lines |
TOPIC | 93.0 | PCFS_SERVER eats the VAX |
| 93.10 | Thu Dec 21 1989 13:04 | It happens in TWO quite often | 12 lines |
TOPIC | 263.0 | Thu Jan 11 1990 11:32 | VAXmate and SCSI controller. Possible ?? | 13 lines |
| 263.2 | Fri Jan 12 1990 14:04 | is the power conn and supply compatible ? | 7 lines |
| 263.5 | Tue Jan 16 1990 09:21 | Fan = yes | 9 lines |
TOPIC | 269.0 | Colorize a VAXmate. |
| 269.3 | Mon Jan 15 1990 10:39 | 8-bit works, 16-bit just blinks | 14 lines |
| 269.5 | Tue Jan 16 1990 09:26 | Why change | 7 lines |
TOPIC | 294.0 | PC-decwindows and screen caputure program manual |
| 294.2 | Wed Feb 14 1990 18:36 | Yes please | 6 lines |
TOPIC | 336.0 | WHO GETS IRQ5??? |
| 336.4 | Tue Jan 30 1990 11:42 | What they told me was ... | 36 lines |
TOPIC | 347.0 | Thu Jan 25 1990 11:58 | PCSA V3 and QEMM and system hangs | 93 lines |
| 347.3 | Fri Jan 26 1990 09:53 | Tried it, wierd results. | 41 lines |
| 347.11 | Sun Jan 28 1990 09:36 | Is it DNNET.. or DNPET... | 31 lines |
TOPIC | 369.0 | Mon Jan 29 1990 16:21 | QEMM availability ???? | 17 lines |
| 369.1 | Mon Jan 29 1990 16:36 | Got it part way.... | 31 lines |
| 369.3 | Tue Jan 30 1990 11:32 | The book says .... | 20 lines |
| 369.5 | Thu Feb 01 1990 06:45 | Conflict with 16-bit GVGA | 11 lines |
| 369.6 | Thu Feb 01 1990 15:00 | It doesn't boot. | 17 lines |
| 369.8 | Fri Feb 02 1990 11:07 | I'm operational anyway. | 67 lines |
| 369.11 | Fri Feb 02 1990 14:46 | Found it myself under 'obscure data in a note' category | 16 lines |
TOPIC | 401.0 | PC/DECwindows access from dial-up laptop? |
| 401.3 | Thu Feb 01 1990 07:00 | Got it, but can't use it... | 7 lines |
TOPIC | 433.0 | PCSA V3.0 and Autocad |
| 433.12 | Fri Feb 16 1990 13:59 | It uses Phar Lap dos-Extender. | 19 lines |
TOPIC | 462.0 | 386 + MSWindows286 V2.11 + QEMM (large frame) = system hang .HELP!! |
| 462.1 | Wed Feb 07 1990 22:47 | do a DIR/TITLE="EMM" | 11 lines |
TOPIC | 478.0 | Fri Feb 09 1990 11:55 | can EMSLOAD load non-PCSA stuff ? | 37 lines |
TOPIC | 479.0 | V4 dos 32 Mbyte file limit to change ?? |
| 479.2 | Fri Feb 09 1990 17:14 | But we still have 8 char. filenames | 5 lines |
TOPIC | 604.0 | Change of nodename... |
| 604.10 | Mon Mar 26 1990 16:02 | Changed areas for VAXmate PCSA nodes | 43 lines |
TOPIC | 619.0 | DEPCA conflict with EMM and other boards |
| 619.3 | Mon Feb 26 1990 12:07 | Try 32k again | 21 lines |
TOPIC | 732.0 | EXCEL and the DECmouse on a DECstation |
| 732.2 | Tue Mar 13 1990 21:32 | Re-install EXCEL | 23 lines |
TOPIC | 891.0 | experience with virus' needed. |
| 891.6 | Sun Apr 01 1990 23:23 | Search for "VIRUS" in IBMPC notesfile | 22 lines |
TOPIC | 915.0 | PC <-> VAX <-> IBM Connectivity?? |
| 915.2 | Mon Apr 02 1990 22:32 | PCSA is the answer | 12 lines |
TOPIC | 932.0 | WINDOWS-286, VT320, Remote Print |
| 932.2 | Thu Apr 05 1990 22:26 | Why does it take so much memory | 13 lines |
TOPIC | 1184.0 | 5 DOS Partitions supported? |
| 1184.1 | Wed May 09 1990 00:04 | I have 5 and severasl on the VAX | 19 lines |
| 1184.5 | Wed May 09 1990 21:55 | Let Atlanta know also | 16 lines |
TOPIC | 1188.0 | Windows 386 and PCSA 3.0 |
| 1188.1 | Wed May 09 1990 00:14 | Not really running WIN386 | 24 lines |
TOPIC | 1204.0 | DECMOUSE and new Microsoft products |
| 1204.6 | Thu May 31 1990 00:04 | Any idea when the new DEPMOUSE.DRV will be available ? | 22 lines |
| 1204.8 | Thu May 31 1990 22:35 | Full screen... | 10 lines |
TOPIC | 1300.0 | PCSA & MS Windows 3.0? |
| 1300.6 | Thu Jun 14 1990 16:09 | Yes but which media is which | 13 lines |
| 1300.7 | Thu Jun 14 1990 22:52 | Windows V3 and which NETwork | 24 lines |
| 1300.22 | Wed Jun 20 1990 23:39 | Let's complain to the product manager | 41 lines |
| 1300.32 | Tue Jun 26 1990 13:37 | Mouse and NEW E-net boards | 7 lines |
| 1300.38 | Thu Jul 05 1990 23:37 | It works for us | 27 lines |
| 1300.42 | Thu Jul 12 1990 08:00 | LK250 and V3. Need help with keypad. | 22 lines |
| 1300.46 | Wed Jul 18 1990 12:36 | Where did you say that was. | 9 lines |
| 1300.50 | Fri Jul 27 1990 12:16 | Win V3 odds and ends | 58 lines |
| 1300.52 | Wed Aug 08 1990 00:44 | More helpful hints ... | 60 lines |
TOPIC | 1429.0 | microsoft windows 3.0 and DEC MOUSE |
| 1429.2 | Mon Jun 11 1990 12:29 | I wonder if it is available internal to DEC | 7 lines |
TOPIC | 1433.0 | LA75 Driver for Windows 3.0? |
| 1433.2 | Sun Jun 17 1990 22:28 | Use it in IBM Proprinter mode | 8 lines |
TOPIC | 1492.0 | VT320 Emulator function keys problem |
| 1492.4 | Tue Jun 19 1990 22:11 | Use the PF2 key | 16 lines |
TOPIC | 1546.0 | Disk quota on File Services |
| 1546.2 | Wed Jun 27 1990 19:11 | Is that for MS-DOS V4 also ? | 9 lines |
| 1546.6 | Fri Jun 29 1990 07:05 | Thanks | 8 lines |
TOPIC | 1564.0 | Modem with the Compaq SLT doesn't work. |
| 1564.2 | Fri Jun 29 1990 06:59 | Move the IRQ jumper on the DEPCA | 12 lines |
| 1564.4 | Sun Jul 01 1990 10:12 | Let you know Monday | 7 lines |
| 1564.5 | Tue Jul 10 1990 11:57 | What I did was ... | 55 lines |
TOPIC | 1682.0 | CAD pkg takes ALL 640K |
| 1682.5 | Tue Jul 17 1990 22:05 | Waht's the name ? | 22 lines |
TOPIC | 1728.0 | Compaq CEMM & MS-WINDOWS |
| 1728.4 | Fri Jul 27 1990 11:57 | Compaq LTE/286 can't do Win V3 color | 18 lines |
TOPIC | 1845.0 | The WHY behind ACAD & PCSA plots |
| 1845.4 | Wed Aug 15 1990 16:16 | How about ?? | 10 lines |
TOPIC | 1875.0 | Problem with VAXmate & VT320 emulator |
| 1875.4 | Tue Aug 21 1990 11:32 | How was it installed again | 13 lines |
TOPIC | 1979.0 | VT340 terminal emulation for PC. |
| 1979.3 | Thu Oct 25 1990 22:37 | Sounds right to me | 17 lines |
TOPIC | 2009.0 | PART NEEDED |
| 2009.1 | Wed Sep 05 1990 12:21 | 2 methods, neither optimum | 69 lines |
TOPIC | 2029.0 | Will decmouse ever work w/windows 3.0????? |
| 2029.2 | Thu Sep 06 1990 23:46 | 1300.x | 4 lines |
TOPIC | 2055.0 | PCSA V2.1 and DE200-AA |
| 2055.6 | Wed Jan 16 1991 21:09 | Does the new DEPCA.TSK work on the VAXmate, OLD Depca rev E,F,H ? | 21 lines |
| 2055.8 | Thu Jan 17 1991 09:57 | Tried DEPCA.TSK and still does not work. | 17 lines |
| 2055.10 | Fri Jan 18 1991 17:55 | I can boot but old DEPCA won't run PCDECwindows | 23 lines |
| 2055.12 | Sat Jan 19 1991 21:02 | Great, now I can get it reloaded and continue testing. | 18 lines |
TOPIC | 2155.0 | Help. Can not get VAXmate internal modem to operate |
| 2155.1 | Mon Sep 24 1990 22:02 | What software ? | 13 lines |
TOPIC | 2197.0 | Copy failure - PCSA Client Setup |
| 2197.1 | Thu Sep 27 1990 21:48 | Similar problem | 15 lines |
TOPIC | 2720.0 | vaxmate and windows 3.0 |
| 2720.4 | Sun Jan 27 1991 21:39 | USE the original PCSA 2.2 WINDOWS disks ONLY | 11 lines |
TOPIC | 3207.0 | how high can we stack the DEC of cards? |
| 3207.3 | Sun Feb 17 1991 08:57 | LaserTwin or another printer | 22 lines |
TOPIC | 3267.0 | MS-Windows and LN03 Support? |
| 3267.4 | Wed Feb 20 1991 22:09 | Use the LN05 with CaPsl cartridge | 10 lines |
TOPIC | 3295.0 | Firmware version/remote boot |
| 3295.1 | Sun Feb 24 1991 21:36 | May be erroneous message. | 8 lines |
TOPIC | 3342.0 | QEMM 5.0, DS316+, LOADHI/EMSLOAD causes reboot |
| 3342.3 | Sun Mar 03 1991 09:29 | It sounds like it is tripping over your graphics stuff. | 18 lines |
TOPIC | 3384.0 | How to local boot PC with DEPCA-LC installed |
| 3384.12 | Wed Apr 03 1991 23:45 | Need internally for new versions of DEPCA | 8 lines |
TOPIC | 3446.0 | DECquery/VAXmate/mouse problem |
| 3446.2 | Mon Mar 25 1991 21:45 | When will it ship ?? | 9 lines |
TOPIC | 3609.0 | DEClaser2000/WINDOWS 3.0 |
| 3609.3 | Sun Mar 31 1991 23:27 | USe either CAPsl or PS upgrade kit for now | 7 lines |
TOPIC | 3833.0 | QWERTY LK250 keyboard without WPS |
| 3833.1 | Sat Apr 20 1991 17:54 | LK250-PA | 10 lines |
TOPIC | 3867.0 | VAXmate Programming info sought |
| 3867.4 | Thu Apr 25 1991 11:22 | I got WIN V3 on the VAXmate to add life | 15 lines |
TOPIC | 3955.0 | SYSTEM HANGS WITH 4.01 |
| 3955.1 | Fri May 03 1991 00:31 | I second that | 12 lines |
TOPIC | 3995.0 | Help with VT320 |
| 3995.2 | Mon May 06 1991 22:04 | On a related note | 18 lines |
TOPIC | 4004.0 | VT320 (mswin) |
| 4004.3 | Thu May 16 1991 22:22 | I have set it to 150 and still have a problem | 7 lines |
TOPIC | 4111.0 | Problem with USE command |
| 4111.1 | Thu May 16 1991 23:21 | Me too BUT ... | 6 lines |
| 4111.3 | Wed May 22 1991 12:10 | Thanks | 6 lines |
TOPIC | 4237.0 | AutoCad plot using Print Service? |
| 4237.2 | Fri May 31 1991 22:07 | Common que and plot to a file work | 9 lines |
TOPIC | 4261.0 | Looking for Pathworks for Macintosh presentation. |
| 4261.2 | Tue Jun 04 1991 23:25 | VHS video also | 3 lines |
TOPIC | 4320.0 | PCSA, VT320TE & MSwindows |
| 4320.1 | Sun Jun 09 1991 22:23 | Be sure to add the DECTERMx.FON. | 19 lines |
TOPIC | 4402.0 | what is the default interrupt, shipped from the factory for the DEPCA |
| 4402.1 | Tue Jun 18 1991 00:18 | DEPCA=IRQ3, DE100/DE200=IRQ5 | 19 lines |
TOPIC | 4673.0 | DWDOS.INI & PASSWORDS |
| 4673.2 | Wed Jul 10 1991 22:46 | PW4 encrypts them in the DWDOS.INI | 18 lines |