TOPIC | 178.0 | Turbolaser Restrictions? |
| 178.6 | Mon Jul 10 1995 14:46 | PATCH ID: OSF325-004 from the CSC | 61 lines |
TOPIC | 215.0 | SMP problem of 8200/8400 when "SECURE" is on position |
| 215.4 | Mon Aug 21 1995 23:42 | Sorry; not in V1.1 release | 10 lines |
TOPIC | 250.0 | Update CIXCD firmware on 8200/8400? |
| 250.6 | Fri Oct 27 1995 14:49 | V2.x will work fine. | 7 lines |
TOPIC | 253.0 | Edt/TPU on console terminal not good |
| 253.3 | Wed Jul 26 1995 11:23 | Fixed in V1.1 Console; Don't Edit at Console. | 23 lines |
| 253.10 | Tue Oct 24 1995 14:10 | No answers; just more questions... | 21 lines |
TOPIC | 277.0 | Boot Support ? |
| 277.1 | Fri Aug 11 1995 15:38 | FDDI-no, HSD30-soon, KFESB,KFMSB-yes, KFESA-no | 16 lines |
TOPIC | 283.0 | Need Configuration Clarify |
| 283.5 | Fri Aug 11 1995 08:25 | KFTIA is Qlogic; KZPSA and KZMSA are not | 9 lines |
TOPIC | 295.0 | TC hangs after 20-30 hrs of uptime |
| 295.2 | Fri Sep 01 1995 01:09 | Just some questions.... | 21 lines |
| 295.5 | Tue Oct 03 1995 10:27 | Base note problem resolved using DECevent | 8 lines |
TOPIC | 306.0 | Workaround for tlaser kzpsa >igig memory restriction? |
| 306.2 | Tue Aug 29 1995 11:40 | Now that we have the S/W workaround....
| 10 lines |
TOPIC | 310.0 | KFTIA and fwd scsi support of more than 1 tape. |
| 310.1 | Thu Aug 31 1995 19:58 | Not in V3.2C, In next Release, Patch? | 8 lines |
| 310.2 | Tue Sep 05 1995 16:21 | V3.2B Patch Number is OSF325-010.... | 11 lines |
TOPIC | 311.0 | Floppy on AS8200? |
| 311.1 | Fri Sep 01 1995 10:53 | Please see 122.* | 8 lines |
TOPIC | 317.0 | Blanking Panels/Terminator modules |
| 317.1 | Wed Sep 06 1995 09:14 | Not recommended | 22 lines |
TOPIC | 336.0 | fddi hangs on 8400 |
| 336.1 | Fri Sep 22 1995 13:00 | Additional Information? | 15 lines |
TOPIC | 348.0 | CPU clock on an 8400? |
| 348.1 | Thu Sep 28 1995 00:40 | Did they make it TOO fast? | 12 lines |
| 348.3 | Thu Sep 28 1995 10:46 | Slow clock, no. Slow system, yes. | 10 lines |
| 348.4 | Fri Sep 29 1995 13:16 | Not as easy as expected.... | 11 lines |
TOPIC | 359.0 | Another 20-30 hr period "hang" problem. |
| 359.1 | Tue Oct 03 1995 10:25 | Problem in note 295 has been resolved | 15 lines |
| 359.3 | Tue Oct 03 1995 13:32 | Interesting..... | 14 lines |
| 359.5 | Tue Oct 03 1995 13:57 | Not necessary.... | 14 lines |
| 359.7 | Tue Oct 03 1995 14:37 | Hopefully the answer is in the errorlog. | 13 lines |
TOPIC | 363.0 | Internet "testimonial" - TL customer wants his money back |
| 363.7 | Thu Oct 26 1995 06:32 | Use IPMT... | 39 lines |
TOPIC | 369.0 | Turbolaser "hang" problem additional info. |
| 369.1 | Tue Oct 10 1995 17:17 | That's it! (Unix folks should be able to help) | 10 lines |
TOPIC | 370.0 | Cache-error questions |
| 370.2 | Tue Oct 10 1995 19:36 | Caches ALWAYS remain ON | 30 lines |
TOPIC | 371.0 | Problem specifying dual path boot |
| 371.1 | Tue Oct 10 1995 18:01 | Must wait 60 retries before other is attempted | 9 lines |
TOPIC | 374.0 | additional console for AS 8200 |
| 374.2 | Wed Oct 11 1995 10:51 | Polycenter Manager? | 7 lines |
TOPIC | 375.0 | 8200 console |
| 375.1 | Thu Oct 12 1995 10:50 | Operations Manual | 9 lines |
TOPIC | 382.0 | Need CPU Board Dimensions |
| 382.3 | Mon Oct 30 1995 10:45 | ...but it's performance is enormous. | 17 lines |
TOPIC | 389.0 | TL Console cable info ? |
| 389.1 | Thu Oct 19 1995 10:54 | Loose piece package contents | 8 lines |
TOPIC | 390.0 | Graphics console for Tlaser |
| 390.1 | Thu Oct 19 1995 10:52 | Reference note 236 in this conference | 5 lines |
TOPIC | 400.0 | Diagnosing a bad memory module? |
| 400.4 | Mon Oct 23 1995 12:08 | Push levers to the bulkhead. | 10 lines |
TOPIC | 404.0 | Proper cpu/memory module ordering? |
| 404.1 | Mon Oct 23 1995 20:54 | That's normal | 6 lines |
TOPIC | 407.0 | URGENT 8200 will not boot |
| 407.2 | Thu Oct 26 1995 05:59 | See note 214; upgrade CPU's console | 9 lines |
TOPIC | 411.0 | Top Ten List |
| 411.5 | Fri Oct 27 1995 14:56 | ... | 15 lines |
TOPIC | 443.0 | Max config chart for 8200/8400 ? |
| 443.1 | Fri Nov 10 1995 17:17 | 8400 slot 9 and 8200 slot 5 are always I/O... | 58 lines |
TOPIC | 446.0 | *** Illegal memory configuration *** |
| 446.3 | Mon Nov 13 1995 09:45 | Yes, there is an impact. | 14 lines |
TOPIC | 449.0 | 8200 performance |
| 449.1 | Tue Nov 14 1995 10:49 | Refer to note 213 | 5 lines |
TOPIC | 451.0 | 8200 mem compatability. |
| 451.1 | Thu Nov 16 1995 10:14 | Explanation in 446.5 | 6 lines |
TOPIC | 468.0 | 2GB Memory hangs selftest |
| 468.1 | Sat Nov 25 1995 23:09 | Seating and/or bent pins likely culprit | 15 lines |
TOPIC | 509.0 | AXP 8200 hang and machine check INT 670 |
| 509.1 | Sun Dec 17 1995 10:07 | See note 400 | 9 lines |
| 509.2 | Mon Dec 18 1995 08:47 | Are you sure the centerplane is faulty? | 9 lines |
TOPIC | 548.0 | memory fetch cycles and timing ? |
| 548.2 | Wed Jan 10 1996 09:44 | Try here; no guarantees... | 7 lines |
TOPIC | 549.0 | Console Commands, Basic, Advanced, Diag |
| 549.1 | Wed Jan 10 1996 18:40 | Not Supported; Don't Use It | 29 lines |
TOPIC | 584.0 | writeerr on OPA0: |
| 584.3 | Mon Jan 29 1996 09:38 | See note 253 | 7 lines |
TOPIC | 613.0 | OPA0 errors |
| 613.1 | Mon Feb 12 1996 09:06 | Please move this discussion to note 253 | 8 lines |
TOPIC | 660.0 | WARNING - Data Overrun Recover Mode could NOT be set! |
| 660.1 | Tue Mar 05 1996 12:22 | New console.... | 5 lines |
TOPIC | 5.0 | Booting, VMB, CIBCA, Controller Names, etc. |
| 5.3 | Fri May 13 1988 13:33 | SDC VMS is the cure | 43 lines |
| 5.8 | Mon May 16 1988 12:06 | Configuration Please? | 29 lines |
| 5.12 | Fri May 20 1988 11:52 | All VMB's are not equal | 17 lines |
TOPIC | 61.0 | VAX 62xx TECH-TIP #5 -- Battery Backup Support |
| 61.3 | Thu Nov 10 1988 10:47 | What state is the system disk in? | 8 lines |
TOPIC | 86.0 | Front Panel FAULT LED. |
| 86.15 | Thu Jul 28 1988 12:04 | Always cluster system disk with KDB in the system? | 12 lines |
TOPIC | 102.0 | Part no. for control panel decal |
| 102.1 | Thu Jul 21 1988 10:51 | Same as Scorpio | 15 lines |
TOPIC | 105.0 | XMI and XCP Clock Systems |
| 105.2 | Fri Jul 22 1988 11:32 | XMI speed n.e. CVAX speed | 8 lines |
TOPIC | 109.0 | Powerfail..does it work? |
| 109.2 | Mon Aug 01 1988 11:10 | Please let us know if the problem is resolved | 20 lines |
TOPIC | 118.0 | VAX-VMS won't load after adding 1 cpu & 1 mem |
| 118.1 | Wed Aug 10 1988 14:15 | Adding a processor CREATES a different system | 10 lines |
TOPIC | 127.0 | VAX 6220 shadowed system disk |
| 127.1 | Mon Aug 22 1988 09:35 | Must include the DUx in the command | 11 lines |
TOPIC | 132.0 | Confusion over meaning of CPU CSR1: XMI AC LO |
| 132.2 | Fri Sep 02 1988 12:56 | ACLO has low assertion level; | 11 lines |
TOPIC | 133.0 | RA82's missing on boot up |
| 133.1 | Fri Sep 02 1988 13:00 | kdb or hsc? | 4 lines |
TOPIC | 140.0 | BBU INFORMATION |
| 140.8 | Wed Oct 05 1988 10:27 | H6 and V5.0-1 | 7 lines |
TOPIC | 281.0 | XMI Transactions - Information. |
| 281.1 | Tue Mar 28 1989 16:46 | commander will retry LOC'd command for timeout duration | 40 lines |
TOPIC | 1046.0 | >>> SPECIFIED NODE IS NOT AN I/O ADAPTER |
| 1046.4 | Tue Dec 03 1991 14:35 | "ID set" changes the node number | 7 lines |