TOPIC | 4.0 | FOR SALE |
| 4.877 | Wed Nov 22 1995 10:19 | Haynes Manuals -Metro, Orion and Dolomite | 22 lines |
TOPIC | 24.0 | *Seen in passing* |
| 24.4038 | Thu Jan 20 1994 10:16 | snap | 4 lines |
TOPIC | 121.0 | Heated rear windows |
| 121.28 | Tue Nov 17 1992 11:58 | Is it still plugged in? | 8 lines |
TOPIC | 188.0 | The "Official Triumph File" |
| 188.187 | Thu Jan 21 1993 15:09 | 3rd and 4th | 5 lines |
TOPIC | 306.0 | Speeding: the pros and cons. |
| 306.176 | Fri Sep 11 1992 15:10 | Long bumps are also effective | 10 lines |
TOPIC | 793.0 | New Rover 200 & 400 |
| 793.257 | Tue Oct 06 1992 17:49 | 3 or 5 doors sir | 6 lines |
| 793.276 | Wed Jan 13 1993 17:30 | John has gone | 0 lines |
TOPIC | 1538.0 | Quotes under September 1991 scheme |
| 1538.624 | Tue Apr 06 1993 16:23 | Mondeo cost to come down | 5 lines |
TOPIC | 1805.0 | New Road Traffic Act |
| 1805.352 | Tue Oct 20 1992 12:06 | suicide is not a crime | 8 lines |
TOPIC | 1818.0 | How would you like to work in comfort? |
| 1818.27 | Wed Aug 26 1992 14:22 | I'll pass on the message | 6 lines |
TOPIC | 1830.0 | Formula1: 1993 season |
| 1830.561 | Tue Nov 24 1992 09:28 | Williams in trouble with FOCA - FISA | 19 lines |
| 1830.581 | Mon Nov 30 1992 16:58 | Mansell | 17 lines |
| 1830.624 | Fri Dec 11 1992 12:01 | | 6 lines |
| 1830.767 | Wed Feb 10 1993 09:41 | Mansell relaxed and enjoying life | 8 lines |
| 1830.831 | Wed Mar 03 1993 08:47 | Senna to test this weekend | 6 lines |
| 1830.1259 | Fri Jul 02 1993 11:03 | Dr JP | 4 lines |
| 1830.1583 | Fri Sep 24 1993 18:22 | Hill will try hard | 6 lines |
TOPIC | 1855.0 | ASLEEP AT THE WHEEL AT 70MPH |
| 1855.58 | Fri Aug 21 1992 17:16 | What about early evening | 15 lines |
TOPIC | 1896.0 | New battery - NO acid! HELP!!! |
| 1896.10 | Fri Sep 25 1992 16:27 | But in the UK | 34 lines |
TOPIC | 1898.0 | Audi 90 - Cold Start |
| 1898.31 | Tue Mar 21 1995 13:26 | Quentin says they are okay | 10 lines |
| 1898.34 | Thu Jul 20 1995 17:52 | Number plate? | 7 lines |
TOPIC | 1942.0 | Slot Car Racing |
| 1942.79 | Thu Nov 26 1992 17:21 | silver steel == drill blank | 26 lines |
| 1942.87 | Fri Nov 27 1992 14:21 | Silver Steel can be hardened | 25 lines |
TOPIC | 1948.0 | Speed Camera signs |
| 1948.91 | Wed Jun 09 1993 14:20 | Top of slip road | 14 lines |
TOPIC | 2009.0 | Indycar racing 1993 |
| 2009.193 | Mon Aug 02 1993 14:16 | I've got a headache | 8 lines |
TOPIC | 2038.0 | Best kept secrets.(Car Fleet moans) |
| 2038.12 | Tue Mar 09 1993 15:45 | | 10 lines |
TOPIC | 2064.0 | Rover 620 |
| 2064.4 | Thu Apr 22 1993 14:41 | RDS on 600 | 10 lines |
TOPIC | 2099.0 | 1994 F1 World Championship |
| 2099.10 | Thu Jun 17 1993 12:43 | Mansell to sign with Newman/Hass | 13 lines |
| 2099.21 | Fri Jul 16 1993 10:12 | | 10 lines |
TOPIC | 2100.0 | FY94 Car Scheme |
| 2100.405 | Fri Aug 06 1993 11:51 | transposition error | 9 lines |
TOPIC | 2198.0 | Nickle-Bronze welding rod? |
| 2198.1 | Tue Jan 04 1994 13:49 | Welded or brazed?? | 23 lines |
TOPIC | 2212.0 | Euro breakdown insurance/Lease cars |
| 2212.7 | Wed Jan 26 1994 09:44 | CC pays | 9 lines |
TOPIC | 2352.0 | Vauxhall Vectra |
| 2352.85 | Tue Apr 09 1996 11:23 | TP on CFM | 16 lines |
TOPIC | 2388.0 | Traffic Lights on Roundabouts |
| 2388.18 | Tue Mar 21 1995 14:03 | Traffic Lights are not always beneficial | 23 lines |
TOPIC | 2428.0 | 1995 BTCC |
| 2428.18 | Fri Sep 08 1995 12:45 | Tim Harvey | 5 lines |
TOPIC | 2434.0 | CAR Servicing from DEC-PARK |
| 2434.1 | Tue Aug 01 1995 11:50 | All the time | 12 lines |
| 2434.3 | Thu Aug 03 1995 10:18 | From memory | 4 lines |
TOPIC | 120.0 | DECnet PhaseV on the PC |
| 120.18 | Wed Jan 27 1993 06:01 | Not that I have found | 17 lines |
TOPIC | 658.0 | Migration stratergy for TCP/IP Ultrix Enviroment to OSI. |
| 658.3 | Fri Aug 28 1992 06:53 | Similar yes, Transparent no | 18 lines |
TOPIC | 688.0 | Interoperability testing. |
| 688.7 | Fri Dec 04 1992 04:08 | Agree | 21 lines |
| 688.14 | Tue Dec 08 1992 04:29 | | 37 lines |
| 688.19 | Tue Dec 15 1992 04:12 | Each instruction mounts up | 8 lines |
| 688.27 | Thu Dec 17 1992 06:53 | Interoperate and conformance test marks are different | 30 lines |
TOPIC | 716.0 | Transport flow control |
| 716.1 | Mon Feb 08 1993 04:40 | yes | 15 lines |
TOPIC | 746.0 | ISODE - Do you know some customers |
| 746.3 | Fri Jul 09 1993 05:15 | Price is the only advantage of ISODE | 14 lines |
TOPIC | 752.0 | ISO 6523-ICD - Siemens NSAP proposal |
| 752.1 | Tue Aug 10 1993 05:24 | RFC1006? | 17 lines |
TOPIC | 772.0 | Why not NCL SHOW NODE X APPLICATION * ALL |
| 772.2 | Fri Nov 05 1993 04:09 | Upper Layers are not layers!! | 29 lines |
| 772.8 | Tue Nov 09 1993 04:54 | Some responses | 82 lines |
TOPIC | 782.0 | LOTOS |
| 782.2 | Wed Nov 24 1993 04:24 | OSI Session Protocol | 17 lines |
| 782.5 | Wed Nov 24 1993 11:46 | | 5 lines |
TOPIC | 793.0 | ES-IS timer. Settable? |
| 793.1 | Wed Jan 26 1994 10:19 | show node x routing all char | 44 lines |
TOPIC | 795.0 | ncl command line prompting feature suggestion |
| 795.1 | Fri Jan 28 1994 08:30 | non-trivial problem | 5 lines |
TOPIC | 837.0 | New ncl command recall options |
| 837.11 | Wed Jul 27 1994 05:07 | Do not use PgUp[ | 43 lines |
| 837.12 | Wed Jul 27 1994 05:09 | DSSR is still active | 8 lines |
| 837.20 | Thu Jul 28 1994 04:50 | PC NCL has been shipping for 6 months | 20 lines |
| 837.21 | Thu Jul 28 1994 04:54 | NCL runs on PC, Ultrix, VMS, DECnis console | 8 lines |
| 837.22 | Thu Jul 28 1994 05:00 | | 7 lines |
| 837.26 | Fri Jul 29 1994 04:56 | | 15 lines |
| 837.29 | Mon Aug 01 1994 05:55 | Its not the Socket interface | 16 lines |
TOPIC | 612.0 | OSI Skinny Stack - What is it? |
| 612.5 | Fri Sep 11 1992 10:28 | Slight corrections | 24 lines |
TOPIC | 616.0 | exit |
| 616.1 | Fri Sep 25 1992 11:14 | 10646 - the universal answer to character sets | 32 lines |
| 616.5 | Thu Oct 01 1992 11:11 | Different Aims | 13 lines |
TOPIC | 634.0 | NSAPs and OSI applications Question |
| 634.7 | Tue Nov 03 1992 09:03 | But the type is in X.500 | 26 lines |
| 634.10 | Mon Nov 09 1992 11:03 | Now we are getting there | 51 lines |
TOPIC | 636.0 | Tue Nov 03 1992 09:17 | Connectionless Upper Layers over Null Internet and Broadcast | 20 lines |
TOPIC | 661.0 | Wisdom on protocol machine timers sought. |
| 661.1 | Fri Jan 15 1993 09:50 | Timers only on association / connection release | 79 lines |
TOPIC | 662.0 | Wisdom on CMISE sought. |
| 662.2 | Fri Jan 15 1993 09:58 | | 19 lines |
TOPIC | 663.0 | ISO RPC? |
| 663.1 | Fri Jan 15 1993 10:16 | ISO RPC Rapporteur here | 18 lines |
TOPIC | 665.0 | session version number |
| 665.1 | Wed Jan 20 1993 10:39 | why need session version 2? | 8 lines |
| 665.4 | Fri Jan 22 1993 09:00 | Testing at all layers is stupid | 8 lines |
TOPIC | 671.0 | X.500 equivalent of DNA$TOWERS ? |
| 671.1 | Wed Feb 24 1993 08:25 | | 22 lines |
| 671.3 | Thu Feb 25 1993 09:54 | in 1992 version | 13 lines |
| 671.5 | Mon Mar 01 1993 10:22 | | 60 lines |
| 671.7 | Tue Mar 02 1993 08:50 | -1 is correct | 16 lines |
| 671.9 | Wed Mar 03 1993 08:35 | | 10 lines |
TOPIC | 679.0 | ASN.1 and IMPLICIT |
| 679.1 | Thu Mar 11 1993 08:59 | Only removed 'redundant tags | 22 lines |
TOPIC | 684.0 | ISO 10026 online? |
| 684.5 | Tue Mar 30 1993 13:02 | no more | 6 lines |
TOPIC | 691.0 | Pres. and Sess. Functional Units required |
| 691.2 | Wed Mar 31 1993 11:26 | X.500 1993 | 9 lines |
TOPIC | 700.0 | OSI documents needed |
| 700.4 | Fri May 14 1993 10:38 | Your National Standards Body | 29 lines |
TOPIC | 709.0 | data segmentation |
| 709.2 | Thu Jul 01 1993 11:08 | OSAK user decides | 27 lines |
TOPIC | 712.0 | DDIS toolkit and ASN.1 questions |
| 712.2 | Wed Jul 14 1993 10:46 | What about OSS? | 5 lines |
TOPIC | 716.0 | Multiplexed TPDUs |
| 716.1 | Mon Aug 23 1993 10:01 | YES | 11 lines |
| 716.10 | Thu Aug 26 1993 10:28 | Why two physical networks? | 45 lines |
TOPIC | 727.0 | OSAK - performance questions |
| 727.2 | Thu Oct 14 1993 10:09 | we use transport | 25 lines |
TOPIC | 1.0 | Introductory note |
| 1.10 | Thu Sep 24 1992 12:20 | Will the traffic be two way? | 12 lines |
TOPIC | 2.0 | Welcome are here... |
| 2.16 | Fri Aug 28 1992 15:41 | Version 1 is no more | 7 lines |
TOPIC | 3.0 | For Sale/Wanted |
| 3.43 | Wed Feb 10 1993 10:53 | On wheels? | 16 lines |
| 3.56 | Fri Sep 24 1993 11:43 | Antique Screw cutting lathe for sale | 27 lines |
TOPIC | 4.0 | Magazines and publishers |
| 4.14 | Thu Apr 06 1995 16:12 | TEE Publishing New address | 16 lines |
| 4.16 | Tue May 09 1995 10:56 | | 8 lines |
| 4.17 | Wed May 10 1995 10:27 | MEW and ME Subscription Rates | 26 lines |
TOPIC | 5.0 | Book Reviews |
| 5.15 | Mon Jan 10 1994 10:11 | South Bend ' How to Run a Lathe' | 14 lines |
TOPIC | 6.0 | Names and addresses of suppliers |
| 6.21 | Mon Sep 14 1992 11:10 | Goodfellow Metals Lts - soft iron suppliers. | 16 lines |
| 6.22 | Mon Sep 14 1992 11:16 | Bromac Regrinds - Milling cutter sharpening. | 16 lines |
| 6.41 | Thu Dec 02 1993 10:11 | J&D Keane - Reading UK | 14 lines |
TOPIC | 7.0 | Table of tap drill sizes |
| 7.13 | Wed Jan 13 1993 18:29 | 7/32 x 40 = ME ?? | 5 lines |
| 7.17 | Thu Jan 14 1993 10:02 | Whitworth | 11 lines |
TOPIC | 9.0 | The Myford Topic. |
| 9.24 | Mon Jan 22 1996 16:39 | Rebuild completed | 11 lines |
TOPIC | 11.0 | Evening or day class topic.... |
| 11.4 | Tue Sep 01 1992 12:15 | Cost is 52 pounds!! | 7 lines |
| 11.5 | Thu Sep 24 1992 12:29 | The equipment is much better | 19 lines |
| 11.6 | Thu Dec 17 1992 17:07 | CNC class | 17 lines |
| 11.10 | Thu Apr 15 1993 14:34 | Expensive | 13 lines |
| 11.15 | Tue Aug 24 1993 10:33 | Its sign up time again | 14 lines |
| 11.17 | Tue Aug 24 1993 14:11 | yup | 20 lines |
| 11.20 | Mon Sep 13 1993 15:50 | My uncle repaired watches | 17 lines |
TOPIC | 14.0 | The TV, book and video tape note.... |
| 14.4 | Mon Jan 04 1993 16:39 | The Model Engineers Workshop Manual - Geo H Thomas | 9 lines |
TOPIC | 15.0 | Software for ME's |
| 15.4 | Mon Jan 10 1994 10:16 | CAD review in MEW | 5 lines |
TOPIC | 17.0 | THE SHOWS TOPIC...... |
| 17.5 | Tue Sep 01 1992 12:11 | Midlands Model Engineering Exhibition | 13 lines |
| 17.15 | Mon Sep 26 1994 12:10 | Midlands Model Engineering Exhibition | 11 lines |
TOPIC | 21.0 | Casting note |
| 21.32 | Wed Jan 20 1993 14:46 | Electric power oven | 9 lines |
TOPIC | 22.0 | Re-babbiting plain bearing headstock |
| 22.6 | Fri Sep 11 1992 17:31 | MEW also | 5 lines |
| 22.9 | Mon Sep 14 1992 11:31 | Copies in post of MEW article | 6 lines |
TOPIC | 23.0 | Mon Aug 17 1992 18:11 | Live Steam and the frustrations of life. | 22 lines |
| 23.2 | Tue Aug 18 1992 10:53 | My Shop | 41 lines |
| 23.3 | Tue Jan 04 1994 09:49 | New Chasis running ! | 19 lines |
| 23.4 | Mon Jul 04 1994 12:11 | It steams | 49 lines |
| 23.5 | Mon Jul 18 1994 15:20 | Continuous Running possible | 48 lines |
| 23.7 | Tue Jul 19 1994 11:29 | Dimensions of NETTA | 37 lines |
| 23.9 | Tue Jul 19 1994 17:27 | | 25 lines |
| 23.11 | Tue Jul 19 1994 19:30 | Not much smaller | 17 lines |
| 23.13 | Mon Aug 22 1994 15:17 | Load test | 28 lines |
| 23.15 | Wed Aug 24 1994 10:49 | | 28 lines |
| 23.16 | Tue Jan 10 1995 11:36 | Real steam look | 29 lines |
| 23.17 | Tue May 09 1995 11:33 | Public streaming season | 31 lines |
| 23.18 | Tue Aug 15 1995 11:47 | Wagon works busy | 19 lines |
TOPIC | 24.0 | Tools of the Trade. |
| 24.1 | Tue Aug 18 1992 10:57 | Myford - they are big | 12 lines |
TOPIC | 27.0 | Thu Aug 20 1992 17:21 | Case Hardening experiences? | 27 lines |
| 27.3 | Mon Aug 24 1992 10:34 | Tubal Cain's comments | 23 lines |
TOPIC | 31.0 | Quick change tool posts |
| 31.11 | Wed Dec 02 1992 18:05 | | 6 lines |
| 31.14 | Fri Dec 04 1992 15:41 | | 19 lines |
| 31.16 | Tue Dec 08 1992 10:39 | the drawing has arrived | 7 lines |
TOPIC | 38.0 | Spring Winding |
| 38.1 | Tue Oct 20 1992 12:14 | Piano wire | 24 lines |
TOPIC | 42.0 | Welding topic |
| 42.8 | Fri Nov 13 1992 18:13 | North Sea gas and Compressed Air | 11 lines |
| 42.10 | Mon Nov 16 1992 17:34 | Single burner | 21 lines |
TOPIC | 44.0 | Mon Nov 23 1992 14:13 | Prof. Chaddock RIP | 7 lines |
| 44.2 | Tue Nov 24 1992 10:36 | | 6 lines |
| 44.3 | Wed Dec 02 1992 12:10 | D.H. Chaddock - Engineer | 40 lines |
TOPIC | 45.0 | A gas (petrol) Engine |
| 45.26 | Tue Aug 15 1995 11:37 | Congratualtions | 6 lines |
TOPIC | 46.0 | Visiting Engineer's Note |
| 46.2 | Fri Apr 02 1993 14:56 | Another ME from UK in the US | 7 lines |
TOPIC | 47.0 | Protection from rusting. |
| 47.7 | Mon Jan 04 1993 16:53 | Relative temperatures | 36 lines |
| 47.13 | Mon Jun 28 1993 15:08 | See the ME | 13 lines |
TOPIC | 49.0 | The joys of this hobby note |
| 49.21 | Tue Jun 08 1993 14:35 | re .20 | 9 lines |
TOPIC | 50.0 | External Single Point Threading |
| 50.11 | Mon Jan 25 1993 10:31 | Reversing a Die? | 12 lines |
| 50.33 | Mon Mar 01 1993 12:27 | Give me Metric anyday | 38 lines |
| 50.38 | Wed Mar 03 1993 14:11 | | 9 lines |
| 50.47 | Wed Mar 10 1993 11:02 | LBSC Advise | 19 lines |
| 50.52 | Fri Mar 12 1993 13:18 | tolerances | 20 lines |
| 50.54 | Fri Mar 12 1993 14:59 | Know - of course I know | 32 lines |
TOPIC | 51.0 | Tool bits |
| 51.35 | Tue Feb 16 1993 10:58 | | 15 lines |
| 51.48 | Wed Nov 01 1995 11:56 | 10ba is standard size | 26 lines |
TOPIC | 57.0 | the heat treatment note |
| 57.2 | Thu Feb 18 1993 10:54 | Leave overnight | 9 lines |
TOPIC | 58.0 | Parting is such sweet sorrow |
| 58.6 | Wed Feb 24 1993 13:07 | I never knew what all the fuss was about until | 18 lines |
| 58.9 | Wed Feb 24 1993 15:11 | | 9 lines |
TOPIC | 62.0 | Files and filing |
| 62.5 | Wed Mar 10 1993 11:20 | Brass only files | 18 lines |
TOPIC | 63.0 | Wed Mar 10 1993 13:29 | Swarf | 14 lines |
| 63.4 | Mon Jun 28 1993 15:00 | Spring in finger | 12 lines |
TOPIC | 65.0 | The official model steam engine note |
| 65.2 | Fri Mar 19 1993 10:07 | Loctite | 10 lines |
| 65.4 | Fri Mar 19 1993 15:15 | | 16 lines |
TOPIC | 68.0 | Thu Mar 25 1993 15:07 | Safety in the 'Shop | 33 lines |
| 68.7 | Fri Mar 26 1993 09:56 | I hear you | 20 lines |
| 68.20 | Tue Mar 30 1993 17:39 | Hammer and cold chisels | 7 lines |
| 68.39 | Mon Nov 22 1993 10:02 | Dangers with rear parting-off tool posts | 9 lines |
| 68.40 | Wed Feb 16 1994 10:56 | Exploding chucks | 14 lines |
| 68.44 | Tue May 09 1995 11:04 | Eye protection | 10 lines |
| 68.45 | Wed May 10 1995 10:34 | Safety codes for goggles | 20 lines |
TOPIC | 69.0 | CNC machines with ME -- Opinion? |
| 69.18 | Mon May 10 1993 15:50 | CNC and model engineering do mix | 25 lines |
| 69.23 | Thu May 13 1993 17:36 | Art or engineering | 31 lines |
TOPIC | 70.0 | Home Shop CNC- the technical topic. |
| 70.3 | Fri May 14 1993 12:26 | I'm Interested | 9 lines |
TOPIC | 72.0 | Thu Jun 17 1993 16:18 | Visit to Plenty Museum | 7 lines |
| 72.1 | Tue Aug 10 1993 16:38 | Dick sends his appologies | 9 lines |
| 72.2 | Fri Oct 22 1993 11:51 | Plenty visit | 49 lines |
TOPIC | 73.0 | Center Drilling |
| 73.4 | Thu Jul 08 1993 14:30 | Flexing of twist drills considered useful!! | 34 lines |
TOPIC | 75.0 | Wed Jul 07 1993 14:28 | Reaming vs Boring | 28 lines |
| 75.2 | Thu Jul 08 1993 10:07 | Stone the reamer | 14 lines |
| 75.4 | Thu Jul 08 1993 14:41 | When is "until the reamer would not quite go through" | 15 lines |
TOPIC | 76.0 | On the shape of steam ports |
| 76.4 | Fri Jul 09 1993 17:10 | Define "runs well" | 36 lines |
| 76.9 | Tue Jul 27 1993 14:54 | | 6 lines |
TOPIC | 78.0 | Scraping |
| 78.10 | Wed Jul 21 1993 10:12 | IC - dry anyway | 26 lines |
TOPIC | 82.0 | Steam Museum at Kew. |
| 82.1 | Mon Aug 02 1993 14:15 | Plenty | 10 lines |
| 82.3 | Tue Aug 03 1993 10:08 | | 6 lines |
TOPIC | 83.0 | Tue Aug 03 1993 10:23 | Loctite | 17 lines |
TOPIC | 85.0 | Source of Sheet Brass? |
| 85.1 | Mon Aug 09 1993 11:51 | try GLR | 13 lines |
TOPIC | 86.0 | Atlas lathe questions |
| 86.2 | Mon Aug 16 1993 13:07 | Be careful | 17 lines |
| 86.11 | Fri Jan 12 1996 13:48 | Courier service | 6 lines |
TOPIC | 90.0 | LNWR Jumbo querry... |
| 90.1 | Tue Aug 24 1993 14:19 | Off hand no | 10 lines |
| 90.5 | Wed Aug 25 1993 18:33 | Hardwick is in the NRM | 11 lines |
| 90.26 | Mon Mar 27 1995 10:36 | How about Rob-Roy? | 27 lines |
| 90.30 | Fri Mar 31 1995 15:25 | | 33 lines |
TOPIC | 93.0 | Wed Sep 15 1993 11:15 | Isle of Mann | 100 lines |
TOPIC | 97.0 | Thu Dec 02 1993 10:18 | Carbon Steel vs HSS taps | 11 lines |
| 97.8 | Fri Dec 03 1993 10:51 | Tapping compound | 7 lines |
| 97.12 | Mon Dec 06 1993 09:15 | | 12 lines |
TOPIC | 98.0 | Thu Dec 02 1993 10:26 | Model Engineering is good for your health - official!! | 14 lines |
TOPIC | 100.0 | Bonding Aluminum |
| 100.11 | Mon Jan 10 1994 09:53 | Snap | 15 lines |
| 100.13 | Mon Jan 10 1994 13:38 | Rat hole ending.... | 12 lines |
TOPIC | 101.0 | Brass soldering? |
| 101.4 | Thu Jan 06 1994 13:52 | Pickle it | 12 lines |
TOPIC | 102.0 | Mon Jan 10 1994 10:28 | South Bend == Boxford | 31 lines |
TOPIC | 107.0 | working with gun metal bronze |
| 107.2 | Wed May 04 1994 14:06 | Gun metal? | 12 lines |
TOPIC | 113.0 | ME index for PC? |
| 113.1 | Thu Jun 16 1994 10:40 | Review in ME 4-17 March 1994 vol 172 No.3964 | 29 lines |
| 113.14 | Tue Jul 12 1994 17:27 | Kennions is now GLR | 7 lines |
| 113.16 | Fri Aug 12 1994 12:20 | Railhill available from TEE | 16 lines |
| 113.19 | Wed Sep 20 1995 09:54 | | 8 lines |
TOPIC | 115.0 | D-bit in cast iron.... |
| 115.3 | Tue Aug 02 1994 10:04 | | 49 lines |
TOPIC | 116.0 | meaning of 20-30 steel? |
| 116.1 | Fri Aug 12 1994 12:13 | No | 8 lines |
TOPIC | 117.0 | Mon Aug 15 1994 12:45 | Steam Engines are the future | 25 lines |
| 117.2 | Tue Aug 16 1994 18:15 | what was that?? | 11 lines |
| 117.5 | Wed Aug 17 1994 10:58 | Thanks | 4 lines |
TOPIC | 119.0 | Micro Lathe II from Taig Tools |
| 119.1 | Mon Oct 03 1994 14:25 | | 7 lines |
TOPIC | 122.0 | Tue Oct 25 1994 10:45 | Midlands ME show | 28 lines |
| 122.2 | Mon Nov 07 1994 19:05 | Myford ML10 and others | 29 lines |
TOPIC | 134.0 | Fri Jul 07 1995 12:59 | Small steam passageways - any experience | 17 lines |
| 134.2 | Mon Jul 17 1995 15:29 | Sizes | 43 lines |
TOPIC | 136.0 | Mon Oct 02 1995 16:51 | Steaming wood | 7 lines |
TOPIC | 140.0 | Restoration of steam locomotive model? |
| 140.3 | Wed Nov 29 1995 11:31 | | 71 lines |
| 140.5 | Fri Dec 01 1995 14:13 | restoration vs improvement | 17 lines |
| 140.6 | Fri Dec 01 1995 14:39 | Use ceramic wicks | 6 lines |
| 140.8 | Wed Dec 06 1995 13:01 | Some answers | 62 lines |
| 140.10 | Thu Dec 07 1995 16:32 | Mind diverted | 9 lines |
TOPIC | 143.0 | Sand blasting |
| 143.3 | Wed Jan 10 1996 11:26 | | 14 lines |
TOPIC | 145.0 | Pickling |
| 145.3 | Wed Jan 17 1996 16:31 | Battery Acid | 35 lines |
| 145.5 | Thu Jan 18 1996 13:44 | | 18 lines |
| 145.9 | Fri Feb 16 1996 11:54 | Congratulations | 18 lines |
TOPIC | 147.0 | Vibration problems |
| 147.19 | Fri Mar 15 1996 14:04 | Hot weather? | 24 lines |
TOPIC | 149.0 | Metal Lathe Access ..... |
| 149.6 | Mon Feb 26 1996 10:44 | Column is square | 15 lines |
TOPIC | 151.0 | Just wondering... |
| 151.12 | Fri Apr 19 1996 14:37 | | 9 lines |
TOPIC | 155.0 | grinder/miller opinions sought... |
| 155.1 | Wed May 01 1996 11:30 | Old vacuum cleaner | 6 lines |
| 155.4 | Fri May 03 1996 10:37 | Microbe size filter | 9 lines |
TOPIC | 160.0 | Steamboats |
| 160.1 | Tue Aug 13 1996 10:50 | Great News | 8 lines |
| 160.2 | Tue Aug 20 1996 16:21 | Mystic? | 5 lines |
TOPIC | 161.0 | Thu Sep 12 1996 15:42 | WD40 attacks silicone `O' rings | 18 lines |
TOPIC | 24.0 | Philips' PNS; also, OSI naming in X.500 |
| 24.3 | Fri Dec 18 1992 05:10 | IAF1 and OSI Naming | 39 lines |
| 24.13 | Tue Jan 05 1993 04:43 | Where are we going | 45 lines |
TOPIC | 40.0 | Issue 11: XTI support |
| 40.5 | Mon Apr 19 1993 04:50 | XTI does not need names | 19 lines |
TOPIC | 52.0 | issue 23: slow directory services |
| 52.2 | Thu Jan 28 1993 05:28 | Which has the definitive data? | 9 lines |
TOPIC | 60.0 | Issue 31: Back translation |
| 60.7 | Mon Feb 01 1993 04:14 | If only it were true | 16 lines |
| 60.10 | Tue Feb 02 1993 09:18 | ???? | 13 lines |
TOPIC | 63.0 | Issue 34: CDI-DECnet API |
| 63.3 | Thu Jan 28 1993 05:53 | Depends when you bind | 9 lines |
TOPIC | 68.0 | CDI and OSI Apps - continued in note 103 |
| 68.2 | Thu Jan 28 1993 06:50 | in either ASN.1 or OSAK format | 22 lines |
| 68.4 | Fri Jan 29 1993 06:04 | Which format? | 29 lines |
TOPIC | 71.0 | Issue 42: preventing DNS RR TXT record conflicts |
| 71.2 | Wed Feb 17 1993 06:17 | | 39 lines |
TOPIC | 72.0 | Issue 43: storing addressing info in X.500 |
| 72.4 | Thu Jan 28 1993 06:37 | Use different attributes | 30 lines |
| 72.6 | Fri Jan 29 1993 05:51 | Need more than N-selector | 32 lines |
| 72.9 | Wed Feb 03 1993 04:37 | Yes BUT | 61 lines |
| 72.10 | Wed Feb 03 1993 04:37 | Yes BUT | 61 lines |
| 72.13 | Thu Feb 04 1993 03:35 | Some answers | 37 lines |
| 72.19 | Mon Feb 08 1993 04:55 | Use standard attributes | 56 lines |
| 72.22 | Thu Feb 11 1993 05:10 | Different emphasis | 50 lines |
| 72.25 | Fri Feb 12 1993 04:31 | Null upper selectors | 14 lines |
| 72.27 | Mon Feb 15 1993 03:40 | re -1 | 35 lines |
| 72.29 | Tue Feb 16 1993 09:13 | | 22 lines |
| 72.32 | Wed Feb 17 1993 09:44 | A non issue | 11 lines |
| 72.35 | Thu Feb 18 1993 04:45 | | 35 lines |
| 72.38 | Fri Feb 19 1993 04:00 | | 100 lines |
| 72.39 | Fri Feb 19 1993 04:04 | Thats about it | 7 lines |
| 72.42 | Wed Feb 24 1993 04:06 | DSA or DUA | 70 lines |
TOPIC | 73.0 | How do we perform backtranslation with X.500? |
| 73.2 | Thu Jan 28 1993 12:11 | cf note 72 | 1 lines |
TOPIC | 79.0 | Syntax for user-visible tower set |
| 79.3 | Wed Mar 10 1993 04:16 | | 23 lines |
| 79.5 | Wed Mar 24 1993 03:52 | just an illustration | 12 lines |
TOPIC | 98.0 | Use of X500 by DECnet/CDI - revisited |
| 98.22 | Fri Jul 02 1993 05:55 | And where are we? | 23 lines |