TOPIC | 111.0 | serial controllers on Sable? |
| 111.11 | Mon Nov 14 1994 08:51 | this is the 8 port async configuration only ( PC/8 ) | 670 lines |
TOPIC | 207.0 | Raid boot NT |
| 207.3 | Wed Sep 21 1994 09:16 | works just fine.... | 1 lines |
TOPIC | 213.0 | FIRMWARE UPDATE RELEASE INFORMATION |
| 213.38 | Tue Nov 15 1994 08:14 | This is done as a friendly gesture, not an undercover operation. | 10 lines |
TOPIC | 236.0 | How Digiboard Setup ? |
| 236.4 | Fri Jul 08 1994 12:28 | PC8 switch settings (8 channel ISA) for VMS.... | 84 lines |
TOPIC | 259.0 | RZ26 mounting brackets, firmware and beta-II quests |
| 259.2 | Wed Jul 13 1994 10:49 | MY COMMENTS IN UPPER CASE.... | 57 lines |
TOPIC | 329.0 | 20 meter AUI cable restriction? |
| 329.4 | Tue Dec 27 1994 09:35 | From the SRM console... | 11 lines |
TOPIC | 383.0 | Dual CPU problems? |
| 383.9 | Thu Aug 18 1994 12:01 | Is the new CPU on the right slot? | 17 lines |
TOPIC | 419.0 | Quality Problem ?? |
| 419.4 | Mon Aug 29 1994 11:28 | Here is how is done..... | 16 lines |
TOPIC | 497.0 | Do I absolutely need the PCXAV monitor? |
| 497.3 | Fri Sep 16 1994 13:45 | and you need to..... | 10 lines |
TOPIC | 515.0 | Backup problem on Sable with Windows NT? |
| 515.1 | Tue Sep 20 1994 12:12 | bad cartrige ?? | 8 lines |
| 515.3 | Wed Sep 21 1994 12:39 | check drives rev code | 5 lines |
| 515.5 | Wed Sep 21 1994 16:47 | at the SRM console level.. | 12 lines |
TOPIC | 524.0 | Boot from HSD30 ?? |
| 524.9 | Tue Dec 27 1994 09:30 | see note 430.0... | 13 lines |
TOPIC | 543.0 | NT 3.5 BETA1-inst. keyboard problem |
| 543.2 | Tue Sep 27 1994 12:48 | you need to upgrade your ARC.... | 9 lines |
TOPIC | 594.0 | Another Case of Slower Performance on 2100 |
| 594.6 | Mon May 01 1995 15:51 | problem found. Resolution being tested. | 136 lines |
TOPIC | 597.0 | FAX card for AXP? |
| 597.3 | Wed Nov 02 1994 16:19 | ON NT AS3.5 we are having a little problem right now..... | 7 lines |
TOPIC | 604.0 | Sable Console Looking For CD-ROM?! |
| 604.1 | Mon Oct 10 1994 15:13 | the console tried to run the exer on the cdrom and the drive had no disks in it... | 4 lines |
TOPIC | 631.0 | Switching btwn. operating systems |
| 631.2 | Wed Oct 19 1994 09:37 | If going from NT to VMS or OSF | 12 lines |
TOPIC | 649.0 | retrofit to rack |
| 649.6 | Thu Dec 19 1996 09:27 | NO CAN DO.... | 8 lines |
TOPIC | 659.0 | Number 9 VGA (PB2GA-CA) not configured |
| 659.1 | Tue Oct 25 1994 11:03 | Don't have to.. | 10 lines |
TOPIC | 672.0 | console v3.7 hangs ECU |
| 672.1 | Thu Oct 27 1994 14:13 | ecu 1.5 is a must... | 1 lines |
TOPIC | 674.0 | Proper version of SRM, PAL and ECU utilities/firmware |
| 674.1 | Fri Oct 28 1994 08:54 | If NTAS 3.5 then V3.7-30 SRM and V3.5-30(MP) ARC and V1.5 ECU | 7 lines |
TOPIC | 695.0 | how to enable the serial port |
| 695.5 | Mon Nov 07 1994 13:17 | chech your connection to the distribution panel | 5 lines |
TOPIC | 715.0 | JBOD removal? |
| 715.8 | Tue Nov 15 1994 08:20 | RCU = RAID Configuration Utility | 9 lines |
TOPIC | 720.0 | EISA ISP error |
| 720.1 | Thu Nov 10 1994 13:43 | more info, please. | 7 lines |
TOPIC | 736.0 | TLZ06L /VMS revisited |
| 736.1 | Tue Nov 15 1994 11:10 | you should see it from the console.. | 8 lines |
TOPIC | 741.0 | WNT V3.5 error DISPLAY_DRIVER.DLL |
| 741.3 | Wed Nov 16 1994 14:56 | did you ordered an NT system? | 5 lines |
TOPIC | 746.0 | LARGE FILE CDROM HANGUP. |
| 746.1 | Thu Nov 17 1994 08:24 | Check for proper SCSI Termination | 5 lines |
TOPIC | 747.0 | help with swxcr on sable |
| 747.1 | Thu Nov 17 1994 13:49 | try it this way.... | 49 lines |
TOPIC | 751.0 | how long should "test" take? |
| 751.1 | Fri Nov 18 1994 13:40 | how much memory on the system?.... | 4 lines |
TOPIC | 757.0 | Mon Nov 21 1994 13:00 | Booting DE422 with 32K buffers..... | 15 lines |
TOPIC | 761.0 | Internal power cable, BA740 |
| 761.2 | Mon Nov 28 1994 10:58 | Power cable comes with it... | 4 lines |
TOPIC | 801.0 | Token Ring and Windows NT cards |
| 801.1 | Fri Dec 02 1994 08:37 | tested for FUNCTIONALITY ONLY... | 9 lines |
TOPIC | 816.0 | swap cpu's between systems? |
| 816.1 | Wed Dec 07 1994 08:22 | Sure you can, but... | 4 lines |
TOPIC | 817.0 | NT Install on Sable |
| 817.1 | Wed Dec 07 1994 08:28 | Try this instead | 15 lines |
| 817.7 | Wed Oct 16 1996 10:03 | a few questions.... | 13 lines |
| 817.11 | Mon Oct 28 1996 11:35 | go ahead with CLEAR_ARC_NVRAM | 8 lines |
TOPIC | 821.0 | Sound Card for Sable? |
| 821.1 | Thu Dec 08 1994 11:38 | The nt as 3.5 document states the following..... | 15 lines |
TOPIC | 822.0 | Presto EISA settings |
| 822.1 | Mon Dec 19 1994 15:35 | VMS/OSF version 1.5...... | 3 lines |
TOPIC | 827.0 | 2100 NT Server install problems |
| 827.4 | Mon Dec 19 1994 15:51 | They are probably treating it as a pc with dos ..... | 6 lines |
TOPIC | 853.0 | Comm port speed limits? |
| 853.1 | Mon Dec 19 1994 15:32 | | 16 lines |
TOPIC | 868.0 | #9 Graphics |
| 868.1 | Thu Dec 22 1994 13:54 | If iit is working fine..... | 4 lines |
TOPIC | 885.0 | NT and VMS on 2100 4/275 |
| 885.5 | Thu Jan 05 1995 13:57 | You still may have to.... | 4 lines |
TOPIC | 902.0 | Net config probs booting from RAID on demi-sable |
| 902.2 | Wed Jan 11 1995 09:55 | It's a known problem... | 10 lines |
| 902.5 | Thu Jan 12 1995 10:18 | It has been shipping since Dec 1, 1994. | 10 lines |
TOPIC | 910.0 | internal storage config |
| 910.2 | Thu Jan 12 1995 10:51 | This is how you configure the BA340 box for serial mode... | 39 lines |
TOPIC | 934.0 | AlphaServer 2000 4/200 & MS452-BA /256MB memory |
| 934.1 | Wed Jan 18 1995 08:12 | Are the rams speeds the same on both? | 4 lines |
| 934.6 | Tue Jan 24 1995 09:35 | I don't know of any reason why you cant. | 5 lines |
TOPIC | 949.0 | Windows NT 3.5 installation hangs with SWXCR disk controller? |
| 949.1 | Mon Jan 23 1995 08:26 | Are there any other disks on the system? | 6 lines |
TOPIC | 987.0 | SERIAL ECU/RCU UTILITIES NOW AVAILABLE ON SABLE. |
| 987.7 | Tue Feb 07 1995 09:02 | only keyboard and mouse failures... | 4 lines |
TOPIC | 1074.0 | XCR_ERROR AND SABLE |
| 1074.4 | Thu Nov 30 1995 09:12 | follow this procedure when configuring the con device | 30 lines |
TOPIC | 1108.0 | Latest ARC firmware version? |
| 1108.3 | Tue Mar 14 1995 16:15 | multiple problems with rev 3.5-31 | 7 lines |
TOPIC | 1297.0 | Problem with second CPU |
| 1297.1 | Wed May 24 1995 15:55 | Can you provide more info, please? | 7 lines |
TOPIC | 1301.0 | DEC2100 VMS to NT3.5 ? |
| 1301.1 | Tue May 30 1995 10:25 | clear_arc_nvram | 49 lines |
TOPIC | 1438.0 | Any problems with 1.8 ECU and 3.2 Firmware on OSF 3.0? |
| 1438.1 | Fri Jul 21 1995 08:06 | CLEAR_ARC_NVRAM | 6 lines |
TOPIC | 1440.0 | RZ28 Activity LED remains ON during idle state |
| 1440.1 | Fri Jul 21 1995 08:16 | just a "feature" | 7 lines |
TOPIC | 1447.0 | MS450-EA 60ns memory for Sable? |
| 1447.1 | Fri Jul 21 1995 08:34 | MS450-EA | 3 lines |
TOPIC | 1448.0 | DE500 required console version? |
| 1448.11 | Tue Mar 05 1996 09:34 | the de500-xa is supported under UNIX 3.2d.. | 4 lines |
TOPIC | 1449.0 | NT 3.51 Upgrade |
| 1449.1 | Fri Jul 21 1995 08:41 | SRM 4.03 ARC 4.30 | 7 lines |
TOPIC | 1483.0 | Power Specs. |
| 1483.1 | Tue Aug 08 1995 12:08 | Power used by your configuration | 37 lines |
| 1483.4 | Wed Feb 07 1996 11:42 | It has been painfull... | 8 lines |
TOPIC | 1498.0 | ECU for WNT on 2100 5/250 |
| 1498.6 | Thu Aug 10 1995 10:00 | PB2GA-CA | 3 lines |
TOPIC | 1503.0 | How to test EISA or PCI NET Options |
| 1503.1 | Thu Aug 10 1995 11:40 | see note 903 | 5 lines |
| 1503.2 | Thu Aug 10 1995 11:47 | Correction.. note 993 | 5 lines |
TOPIC | 1504.0 | "ARC" dumps after swapping IO-board |
| 1504.3 | Thu Aug 10 1995 17:27 | reload the console from the CD | 12 lines |
TOPIC | 1510.0 | Demi-sable/storageworks problem |
| 1510.2 | Mon Oct 02 1995 15:17 | Out of rev flex print cable..maybe? | 8 lines |
TOPIC | 1527.0 | Problem with SWXCR-EB when reconfiguring RAID... |
| 1527.3 | Wed Aug 30 1995 09:21 | copy CFG files to the ECU disk... | 8 lines |
TOPIC | 1573.0 | Digital 2100 A500MP == AlphaServer 2100 4/200??? |
| 1573.3 | Wed Sep 20 1995 11:50 | they are one and the same... | 4 lines |
TOPIC | 1663.0 | Problem with a TLZ6L on a AS2100 |
| 1663.1 | Tue Oct 17 1995 09:40 | WHAT is meant is..... | 8 lines |
TOPIC | 1664.0 | unreconized componet circuit EWA-1 |
| 1664.1 | Tue Oct 17 1995 14:22 | Need more info... | 10 lines |
TOPIC | 1699.0 | RAID controller (SWXCR) error after installing Digital UNIX V3.2C? |
| 1699.1 | Tue Oct 31 1995 17:24 | Which MLX0075.CFG did you used? | 10 lines |
TOPIC | 1702.0 | I/O module revisions? |
| 1702.1 | Thu Nov 02 1995 13:47 | Use the build command... | 11 lines |
TOPIC | 1711.0 | Firmware 4.25 on 2100 4/275 ????? |
| 1711.2 | Tue Nov 07 1995 08:42 | Is located in the 3.2 and 3.3 firmware CDs | 9 lines |
TOPIC | 1714.0 | 2000<>2100 disk transplant |
| 1714.1 | Wed Nov 08 1995 09:02 | follow this procedure and you should be ok... | 18 lines |
TOPIC | 1726.0 | System hung: NVRAM update in progress. |
| 1726.1 | Wed Nov 15 1995 08:33 | Use the Verify option.... | 16 lines |
TOPIC | 1748.0 | SWXCR installation problem |
| 1748.2 | Mon Nov 27 1995 09:10 | You must install terminator after the CD-Rom as well..... | 5 lines |
TOPIC | 1752.0 | QVision 1024 1MB Video Card ona 4/200 |
| 1752.2 | Wed Nov 29 1995 13:30 | maybe a stuck bit.... | 4 lines |
TOPIC | 1764.0 | Sable hangs intermittent with WNT 3.51 |
| 1764.2 | Fri Dec 01 1995 16:20 | Lots of things need to be done... | 16 lines |
| 1764.4 | Tue Dec 05 1995 17:41 | some answers... | 35 lines |
| 1764.6 | Wed Dec 06 1995 11:07 | I have seen misconfigured controllers do stran .... | 13 lines |
TOPIC | 1765.0 | Swapping KZESC with KZPSC |
| 1765.1 | Fri Dec 01 1995 16:31 | Yes you may, but.... | 7 lines |
TOPIC | 1769.0 | NT Hangs |
| 1769.1 | Tue Dec 05 1995 17:27 | More information, please... | 13 lines |
TOPIC | 1807.0 | VT320 does not work on console port |
| 1807.2 | Fri Jan 05 1996 11:02 | Are you using the H8571J connector...? | 5 lines |
TOPIC | 1865.0 | 2100A 4/275 |
| 1865.2 | Tue Jan 16 1996 08:32 | Just re-run the ECU... | 6 lines |
TOPIC | 1919.0 | KZPSA on LYNX (2100A-5/250) |
| 1919.2 | Wed Feb 07 1996 11:45 | Make sure that they are at A10 rev... | 1 lines |
| 1919.4 | Fri Feb 09 1996 14:33 | I'm afraid is true... | 4 lines |
TOPIC | 1928.0 | Can't install operating system |
| 1928.1 | Fri Feb 09 1996 09:40 | more info please... | 8 lines |
TOPIC | 1929.0 | Installing NT on 2100 ( previously running Digital UNIX) |
| 1929.1 | Fri Feb 09 1996 09:49 | use the following procedure... | 11 lines |
TOPIC | 1946.0 | only one RZ28 seen from firmware at a time... |
| 1946.1 | Fri Feb 16 1996 08:44 | chech your store enclousure configuration.... | 20 lines |
TOPIC | 1953.0 | Demisable 4/233 FW/OS |
| 1953.1 | Mon Feb 19 1996 10:46 | yes, it is supported.. | 4 lines |
TOPIC | 1994.0 | RZ29B on AlphaServer 2100 with Fan or NOT? |
| 1994.1 | Thu Mar 07 1996 09:02 | where did you get this information from? | 4 lines |
TOPIC | 1995.0 | 3rd port of KZPSC only for external connection |
| 1995.1 | Thu Mar 07 1996 09:05 | yes you can but... | 6 lines |
TOPIC | 1997.0 | Can I move memory from sable 4/200 to 4/275 |
| 1997.1 | Thu Mar 07 1996 09:51 | yes, you can.. | 3 lines |
| 1997.3 | Thu Mar 07 1996 13:31 | I have multiple sysems with that type of memory. .. | 1 lines |
TOPIC | 1999.0 | Filename conventions for .CFG files on ECU |
| 1999.2 | Thu Mar 07 1996 13:34 | A?????.CFG stands for Alpha... | 4 lines |
| 1999.4 | Fri Mar 08 1996 11:38 | open the file and look at it... | 6 lines |
TOPIC | 2004.0 | 2100 5/250 and NT and PB2GA-FB (ATI Mach64-GSA) |
| 2004.1 | Fri Mar 08 1996 14:27 | two (actually three) questions... | 11 lines |
TOPIC | 2010.0 | Urgent HELP with ATI MACH 64 and NT 3.51 |
| 2010.3 | Wed Apr 10 1996 11:49 | ADD !ISA000.CFG..... | 7 lines |
TOPIC | 2034.0 | EtherExpress Pro/100 problem on 2100 5/250 |
| 2034.3 | Tue Mar 26 1996 08:43 | Yes, it is supported... | 5 lines |
TOPIC | 2040.0 | Year 2076 ??? |
| 2040.1 | Tue Mar 26 1996 08:47 | set OS_TYPE to NT | 6 lines |
TOPIC | 2042.0 | De500 under WNT |
| 2042.5 | Thu Mar 28 1996 09:51 | can you call, please? | 8 lines |
TOPIC | 2069.0 | serial port problem on 2100a |
| 2069.4 | Thu Apr 11 1996 11:23 | try the serial pannel first.... | 6 lines |
TOPIC | 2072.0 | Wide cabinet on old Sable? |
| 2072.1 | Fri Apr 12 1996 12:26 | check the variant, but yes... | 5 lines |
TOPIC | 2074.0 | ATI Mach64 GX ISA on AlphaServer 2000 ? |
| 2074.1 | Fri Apr 12 1996 12:18 | SRM V4.3.. | 3 lines |
TOPIC | 2076.0 | Memory speeds... |
| 2076.1 | Fri Apr 12 1996 16:13 | see description... | 4 lines |
TOPIC | 2090.0 | NT setup on Server 2000 5/250 |
| 2090.1 | Thu Apr 18 1996 15:52 | is your video card an ISA card... | 6 lines |
TOPIC | 2130.0 | Booting an Alternative Operating System |
| 2130.4 | Mon May 06 1996 17:24 | what that arc command does is.... | 9 lines |
TOPIC | 2147.0 | 2100a upgrade procedure - HAL change? |
| 2147.1 | Thu May 16 1996 09:52 | yes, but.... | 58 lines |
TOPIC | 2162.0 | WNT SUPPORT FOR TAPES ? how ? |
| 2162.3 | Tue May 28 1996 12:11 | "+DIKS" = ..... | 9 lines |
TOPIC | 2164.0 | KZPSA problem |
| 2164.3 | Thu May 30 1996 10:21 | list the content of show version.... | 11 lines |
TOPIC | 2167.0 | kzesc and ev5 |
| 2167.2 | Mon Jun 03 1996 13:59 | also... | 8 lines |
TOPIC | 2188.0 | Leave it to a PRO |
| 2188.1 | Mon Jun 10 1996 11:42 | you exceeded the +12V.. | 20 lines |
TOPIC | 2244.0 | MS450-FA and MS450-CA ? |
| 2244.1 | Mon Jul 08 1996 17:03 | ca=80ns fa=60ns | 5 lines |
TOPIC | 2245.0 | Error seeing second drive on 2100 |
| 2245.1 | Mon Jul 08 1996 17:05 | skip one slot.. | 5 lines |
| 2245.3 | Tue Jul 09 1996 11:19 | the ba340 box is similar to a ba350 and ba356 but.... | 73 lines |
| 2245.5 | Wed Jul 10 1996 16:43 | here is one example why...... | 11 lines |
TOPIC | 2273.0 | KN470 UPGRADE |
| 2273.5 | Thu Aug 15 1996 10:32 | clear_error cpu* | 4 lines |
TOPIC | 2293.0 | 2100 4/200 to 2100A 4/200? |
| 2293.1 | Mon Aug 05 1996 14:21 | Yes, you can... | 4 lines |
TOPIC | 2310.0 | AlphaServer 2000 5/300 - which version of unix? |
| 2310.1 | Wed Aug 14 1996 10:19 | info you requested... | 70 lines |
TOPIC | 2311.0 | 2100 Dual boot disks:WNT and Unix? |
| 2311.2 | Wed Aug 14 1996 10:53 | yes you can, but.... | 43 lines |
TOPIC | 2332.0 | Serial console not working on a A2100A |
| 2332.3 | Wed Sep 04 1996 14:07 | h8571J... | 4 lines |
TOPIC | 2334.0 | ATI Graphics Windows NT on a 2100 5/250RM |
| 2334.3 | Wed Sep 04 1996 14:18 | use !ISA0000.CFG.... | 7 lines |
TOPIC | 2370.0 | NT3.51, 4/200, swxcr |
| 2370.8 | Fri Sep 27 1996 12:06 | clear-arc-nvram | 7 lines |
TOPIC | 2377.0 | Install of NT Server V4.0 onto Alpha 2100 Disk Visibility Problems |
| 2377.1 | Mon Oct 07 1996 17:39 | please post you hardware configuration... | 4 lines |
TOPIC | 2396.0 | Do Not use the V3.7 Alpha Firmware CD |
| 2396.2 | Wed Oct 16 1996 10:32 | problem description... | 36 lines |
TOPIC | 2427.0 | 4/200 -> 5/300. What about the memory modules ? |
| 2427.1 | Tue Nov 05 1996 08:41 | You can use those memory cards | 5 lines |
TOPIC | 2429.0 | KZESC disappears after upgrading to a RM2100A 5/250 |
| 2429.4 | Wed Nov 06 1996 13:55 | more info, please. | 6 lines |
TOPIC | 2430.0 | sable with 2CPU's |
| 2430.1 | Thu Nov 07 1996 08:57 | did you removed your network...... | 9 lines |
| 2430.3 | Thu Nov 07 1996 13:19 | drivers location.... | 10 lines |
TOPIC | 2433.0 | More RZ29B-VW problems... |
| 2433.1 | Tue Nov 12 1996 11:26 | re-run RCU and... | 14 lines |
TOPIC | 2436.0 | Token Ring/Blue Screen Crash - related? |
| 2436.1 | Tue Nov 12 1996 11:37 | that card is NOT supported on the AS2000 | 10 lines |
TOPIC | 2439.0 | Using PCM to control AS2100 running ARC/Windows NT |
| 2439.1 | Thu Nov 14 1996 16:17 | change terminal settings to... | 6 lines |
TOPIC | 2441.0 | AS2100 Checksum Not Zero |
| 2441.1 | Tue Nov 19 1996 09:08 | remove all EISA options and..... | 10 lines |
TOPIC | 2443.0 | os_type: NT - cipca console driver not started |
| 2443.1 | Tue Nov 19 1996 09:50 | its a feature.....really! | 11 lines |
TOPIC | 2451.0 | Corrupt screen on 2100A |
| 2451.2 | Mon Nov 25 1996 09:30 | I would like to take a look at it... | 9 lines |
TOPIC | 2452.0 | so many boots, so different crashes ... |
| 2452.1 | Mon Nov 25 1996 16:27 | run ECU first (make sure is VMS/OSF ecu disk) | 13 lines |
| 2452.3 | Tue Nov 26 1996 08:50 | use the following procedure.... | 16 lines |
TOPIC | 2466.0 | cooling for rz29 disks |
| 2466.1 | Thu Dec 12 1996 16:16 | yes you can... | 4 lines |
TOPIC | 2495.0 | kzpaa..rz disk..issues...(???).. |
| 2495.1 | Tue Jan 21 1997 11:54 | post the content of .... | 13 lines |
TOPIC | 2498.0 | RCU config on AS2100 Dual CPU.. |
| 2498.1 | Wed Jan 22 1997 09:16 | its a known problem with a solution... | 9 lines |
TOPIC | 2499.0 | How to configure a number 9 gxe video adapter using the ECU
|
| 2499.3 | Mon Jan 27 1997 14:39 | NT 4.0 and NT 3.51 both!!! | 5 lines |
TOPIC | 2526.0 | KZPSA on 2100A ARC support |
| 2526.3 | Wed Mar 05 1997 16:34 | Nope, never had | 7 lines |
TOPIC | 2542.0 | DUAL SRM booting of LFU on new B2110-AA I/O modules |
| 2542.6 | Wed Mar 05 1997 16:52 | need to load the right console for right CPU type | 14 lines |
TOPIC | 2560.0 | Console errors when installing sound card |
| 2560.1 | Fri Mar 21 1997 14:22 | best guess is .... | 15 lines |
TOPIC | 2566.0 | ATI MACH64 AS2000 performance? |
| 2566.1 | Wed Apr 02 1997 18:08 | you can remove it. | 4 lines |