TOPIC | 4.0 | This Old House topic |
| 4.303 | Tue Oct 24 1989 14:32 | Where is the barn? | 6 lines |
TOPIC | 15.0 | The Dumbest Thing I've Ever Done! |
| 15.129 | Fri Jul 17 1987 10:14 | 1st commandment of plumbing | 9 lines |
TOPIC | 21.0 | Fans - Shop Exhaust |
| 21.5 | Wed Oct 15 1986 14:23 | spark resistant fan | 15 lines |
TOPIC | 23.0 | Fans - Kitchen |
| 23.21 | Mon Nov 16 1987 15:43 | DO NOT VENT INTO ATTIC | 11 lines |
TOPIC | 25.0 | Fans - Attic |
| 25.127 | Fri Sep 12 1986 14:51 | Graingers | 22 lines |
| 25.226 | Wed Jul 23 1986 12:05 | | 9 lines |
TOPIC | 37.0 | Floor - General info |
| 37.43 | Thu Jul 10 1986 15:38 | sawzall | 4 lines |
| 37.49 | Fri Jul 11 1986 10:49 | I've done it before | 16 lines |
| 37.53 | Thu Aug 07 1986 17:15 | | 6 lines |
| 37.240 | Wed Mar 04 1987 09:52 | No problems when I did it. | 26 lines |
| 37.328 | Mon Jul 13 1987 11:27 | working on your knees is tough | 21 lines |
TOPIC | 40.0 | Floor - Tile/Vinyl/Linoleum |
| 40.240 | Thu Jan 22 1987 14:42 | Measure twice, cut once | 10 lines |
TOPIC | 57.0 | Hot Water - Tankless |
| 57.127 | Thu Feb 04 1988 11:16 | Parts? | 5 lines |
TOPIC | 58.0 | Water Wells |
| 58.35 | Tue Jul 29 1986 12:17 | concrete well tile | 5 lines |
| 58.616 | Wed Jun 24 1987 22:15 | Possible hole in pipe | 15 lines |
| 58.814 | Tue Aug 30 1988 15:50 | One pipe in and two pipes out. | 7 lines |
TOPIC | 64.0 | Hot Water - Gas |
| 64.20 | Fri May 29 1987 11:42 | | 7 lines |
| 64.28 | Mon Jun 01 1987 17:09 | Gas/Wood furnace | 4 lines |
TOPIC | 71.0 | Air Conditioning |
| 71.27 | Wed Jan 21 1987 11:34 | | 31 lines |
| 71.29 | Wed Mar 04 1987 13:01 | | 7 lines |
| 71.33 | Mon Mar 16 1987 16:50 | 4" ducts = problems | 9 lines |
| 71.35 | Tue Mar 17 1987 09:44 | Some possibilities | 25 lines |
| 71.37 | Wed Mar 18 1987 15:27 | Since you asked | 32 lines |
| 71.39 | Mon Mar 30 1987 14:28 | Have you thought about moving? 8-) | 21 lines |
| 71.43 | Wed Apr 01 1987 10:28 | A cost break down | 40 lines |
| 71.53 | Thu Aug 06 1987 13:46 | register placement, drain pan | 15 lines |
| 71.56 | Mon Mar 21 1988 10:00 | Depends upon where the ducts are. | 4 lines |
| 71.78 | Fri Apr 17 1987 12:44 | some thoughts | 14 lines |
| 71.181 | Tue Jan 20 1987 11:30 | Ex installer | 45 lines |
| 71.184 | Wed Jan 21 1987 11:40 | Should only need one return | 7 lines |
| 71.228 | Wed Apr 15 1987 18:00 | | 16 lines |
TOPIC | 79.0 | Heat - Central system comparisons |
| 79.19 | Mon Jun 23 1986 15:34 | Son of a Tinknocker | 32 lines |
| 79.76 | Mon May 16 1988 14:39 | a possible cause? | 5 lines |
| 79.246 | Tue Feb 02 1988 14:31 | Separate zones with FHA | 7 lines |
| 79.262 | Wed Feb 17 1988 14:20 | | 19 lines |
TOPIC | 83.0 | Heat - FHA (Gas) |
| 83.72 | Mon Jul 13 1987 11:09 | | 15 lines |
| 83.112 | Mon Dec 12 1988 11:35 | It may be a more general problem | 7 lines |
| 83.114 | Mon Dec 12 1988 14:02 | Duct tape is fine. | 31 lines |
| 83.123 | Thu Dec 15 1988 10:43 | duct tape | 33 lines |
| 83.125 | Thu Dec 15 1988 14:30 | | 8 lines |
| 83.169 | Tue Jan 13 1987 09:20 | Glow coil units | 11 lines |
TOPIC | 84.0 | Heat - FHA (Oil) |
| 84.5 | Thu Jan 21 1988 11:24 | There are some new units | 6 lines |
TOPIC | 85.0 | Heat - FHA (General) |
| 85.62 | Mon Nov 24 1986 09:47 | Information on furnace wiring | 36 lines |
| 85.68 | Fri Apr 24 1987 15:29 | | 10 lines |
| 85.76 | Fri May 15 1987 12:03 | BUT | 5 lines |
| 85.100 | Fri May 15 1987 12:02 | weldable | 11 lines |
| 85.109 | Mon May 18 1987 17:34 | have them do it. | 13 lines |
| 85.210 | Tue Aug 09 1988 10:46 | Replace | 15 lines |
| 85.299 | Tue Nov 25 1986 15:56 | Fan control switch | 18 lines |
| 85.324 | Tue Jul 14 1987 13:17 | | 30 lines |
TOPIC | 86.0 | Heat - LP Gas |
| 86.8 | Tue Dec 29 1987 11:24 | some ideas | 16 lines |
| 86.18 | Tue Jan 05 1988 12:39 | small motor | 18 lines |
| 86.23 | Wed Jan 06 1988 13:39 | odd size | 4 lines |
| 86.33 | Tue Jan 12 1988 14:37 | GAS FHA maintenance | 46 lines |
| 86.47 | Fri Jan 29 1988 10:38 | Find the original maufacturer | 12 lines |
| 86.78 | Fri May 06 1988 17:44 | What return ducts? | 9 lines |
| 86.137 | Wed Mar 04 1987 10:00 | Why not add the ductwork | 5 lines |
TOPIC | 88.0 | Heat - Oil Burners |
| 88.240 | Fri Feb 20 1987 12:30 | Add a clock | 7 lines |
TOPIC | 90.0 | Heating Oil Storage |
| 90.3 | Mon Jul 28 1986 12:51 | Cover with Sakrete sand mix | 5 lines |
TOPIC | 107.0 | Windows |
| 107.106 | Thu Jun 26 1986 15:43 | Need the right tools | 16 lines |
TOPIC | 140.0 | Mon Jul 28 1986 16:04 | Concrete | 10 lines |
| 140.3 | Tue Jul 29 1986 12:12 | thanks, | 6 lines |
| 140.396 | Wed Sep 03 1986 12:17 | doing it myself | 18 lines |
| 140.399 | Thu Sep 04 1986 17:24 | | 9 lines |
TOPIC | 147.0 | Excavation |
| 147.32 | Thu Jan 22 1987 14:50 | | 14 lines |
| 147.34 | Thu Jan 29 1987 13:12 | | 13 lines |
TOPIC | 148.0 | Concrete - Foundations |
| 148.117 | Wed Aug 26 1987 14:47 | Stow Sand and Gravel | 5 lines |
TOPIC | 149.0 | Basement - Sump Pumps |
| 149.3 | Mon Dec 22 1986 13:20 | | 5 lines |
TOPIC | 150.0 | Basement Flooding, Dampness, etc |
| 150.109 | Mon Jul 14 1986 14:29 | Think twice about the pump. | 10 lines |
TOPIC | 163.0 | Fireplaces |
| 163.1 | Wed Aug 06 1986 14:51 | privacy? | 18 lines |
TOPIC | 164.0 | Stoves, Coal & Wood |
| 164.88 | Mon Apr 06 1987 17:33 | | 7 lines |
TOPIC | 166.0 | Chimney Topic |
| 166.111 | Fri Apr 24 1987 15:48 | | 9 lines |
TOPIC | 172.0 | Shelves |
| 172.7 | Tue Nov 11 1986 09:48 | 2 x 10's ????? | 3 lines |
TOPIC | 186.0 | Roof Topic |
| 186.587 | Wed Oct 25 1989 11:15 | You need to find a big iron | 14 lines |
TOPIC | 189.0 | Roof - Gutters |
| 189.52 | Tue Nov 18 1986 11:47 | Ask for .032 gutter | 6 lines |
TOPIC | 190.0 | Roof - Ice Dams |
| 190.20 | Thu Jan 29 1987 13:04 | Anyone ever try rock salt? | 23 lines |
TOPIC | 193.0 | Septic Systems |
| 193.660 | Fri Aug 29 1986 23:37 | | 2 lines |
TOPIC | 198.0 | Bathroom - Toilets |
| 198.37 | Fri Jul 11 1986 14:16 | Time to climb inside (yuk) | 7 lines |
| 198.61 | Wed Jul 23 1986 11:55 | $75 pump made by TEEL | 5 lines |
TOPIC | 207.0 | Bathroom Tile |
| 207.134 | Tue Feb 17 1987 11:09 | Ceramic Tile Suppliers | 20 lines |
| 207.141 | Mon Mar 23 1987 16:02 | don't do it | 4 lines |
TOPIC | 262.0 | Kitchens |
| 262.125 | Tue Feb 24 1987 13:31 | Hanging cabinets | 39 lines |
| 262.127 | Mon Mar 02 1987 09:58 | 3/4" BC exterior | 13 lines |
| 262.131 | Thu Mar 05 1987 17:40 | I didn't use braces | 10 lines |
TOPIC | 264.0 | Kitchen Counters & Cabinets |
| 264.2 | Wed Dec 17 1986 09:54 | Penny Pincher | 28 lines |
| 264.5 | Wed Dec 17 1986 11:52 | plywood = wood | 4 lines |
| 264.163 | Wed Feb 17 1988 13:54 | Micro Mate hood/microwave shelf | 18 lines |
| 264.165 | Fri Feb 26 1988 09:08 | | 8 lines |
TOPIC | 276.0 | Studs |
| 276.48 | Mon Aug 04 1986 15:50 | | 8 lines |
TOPIC | 288.0 | Lighting, Outdoor |
| 288.186 | Tue Jan 13 1987 09:30 | Check it now! | 11 lines |
TOPIC | 290.0 | Electrical Service (service entrance, breaker panel, etc) |
| 290.735 | Mon Jul 13 1987 10:53 | Light fixtures and power factors | 14 lines |
TOPIC | 298.0 | Radon |
| 298.156 | Wed Sep 21 1988 14:50 | | 6 lines |
TOPIC | 303.0 | Building Codes |
| 303.11 | Tue Apr 14 1987 23:26 | | 8 lines |
TOPIC | 306.0 | Building Inspectors |
| 306.21 | Wed Aug 26 1987 14:43 | | 6 lines |
TOPIC | 349.0 | Wallpaper |
| 349.56 | Wed Sep 17 1986 14:33 | don't start with the bathroom | 9 lines |
TOPIC | 354.0 | Wall - Brick (maint./repair) |
| 354.4 | Wed Feb 25 1987 14:41 | Was the wall prepared for bricks? | 12 lines |
| 354.7 | Thu Feb 26 1987 11:04 | BRICK FACE | 22 lines |
TOPIC | 356.0 | Wall - Construction Erosion-Protection (hay bales) |
| 356.2 | Fri Apr 10 1987 14:36 | | 5 lines |
TOPIC | 388.0 | Plumbing |
| 388.145 | Fri Oct 17 1986 15:57 | Cover with paper towel when soaking | 5 lines |
TOPIC | 403.0 | Spag's??? |
| 403.56 | Wed Dec 03 1986 14:58 | sheds | 2 lines |
TOPIC | 476.0 | Appliances - Refrigerator/Freezer |
| 476.3 | Mon Jan 19 1987 10:37 | wood plugs | 5 lines |
TOPIC | 482.0 | Appliances - Humidifiers |
| 482.29 | Fri Oct 17 1986 15:53 | Central humidifier information | 35 lines |
TOPIC | 500.0 | Appliances - Air cleaners |
| 500.5 | Tue Nov 18 1986 11:43 | Need custom metalwork | 20 lines |
| 500.20 | Tue Dec 23 1986 10:08 | Maintenance | 18 lines |
TOPIC | 590.0 | Doors, Interior |
| 590.21 | Wed Dec 17 1986 11:57 | | 8 lines |
TOPIC | 622.0 | Driveway - Hot-Top |
| 622.77 | Wed Apr 01 1987 17:50 | | 7 lines |
| 622.327 | Tue Mar 31 1987 14:03 | Make sure you really don't need it. | 6 lines |
TOPIC | 628.0 | Sheds |
| 628.250 | Wed Jan 07 1987 10:34 | Concrete walk | 13 lines |
TOPIC | 630.0 | Garage / Shed wiring |
| 630.118 | Thu Mar 05 1987 17:28 | table saw wiring | 9 lines |
| 630.120 | Fri Mar 06 1987 13:01 | | 5 lines |
TOPIC | 634.0 | Garages |
| 634.29 | Mon Aug 04 1986 15:54 | legal drain? | 6 lines |
| 634.328 | Fri Jun 03 1988 17:04 | You can shoot fastners into steel beams | 9 lines |
TOPIC | 636.0 | Patio |
| 636.1 | Wed Aug 06 1986 14:56 | | 4 lines |
| 636.19 | Fri May 29 1987 14:10 | cut and crack | 9 lines |
| 636.47 | Thu Jul 16 1987 13:33 | Use Sakrete sand mix for the filler | 11 lines |
TOPIC | 653.0 | Tools - Lawn/Garden |
| 653.76 | Wed Sep 03 1986 11:21 | Echo the ECHO recommendation | 19 lines |
TOPIC | 659.0 | Tree Removal |
| 659.22 | Wed Jun 25 1986 15:03 | What it could cost | 40 lines |
| 659.24 | Thu Jun 26 1986 11:14 | Olympic Tree Service | 9 lines |
| 659.26 | Thu Jul 24 1986 15:41 | | 16 lines |
TOPIC | 683.0 | Snow Blowers |
| 683.169 | Wed Jan 13 1988 13:24 | shear pin | 8 lines |
TOPIC | 757.0 | How to bend oak |
| 757.8 | Wed Nov 18 1987 09:45 | veneer | 7 lines |
TOPIC | 882.0 | Plans, Swings |
| 882.10 | Wed Mar 18 1987 15:45 | A different approach | 13 lines |
TOPIC | 900.0 | Plans, Laundry Chute |
| 900.22 | Mon Apr 06 1987 17:12 | Non standard duct joints | 21 lines |
TOPIC | 901.0 | Plans, Basketball Court/hoop |
| 901.9 | Tue Dec 01 1987 12:37 | Spags of course | 17 lines |
TOPIC | 1010.0 | Tools - Electric jack hammers |
| 1010.2 | Fri Jan 23 1987 11:03 | | 10 lines |
TOPIC | 1170.0 | Pests - Bats |
| 1170.7 | Fri Aug 29 1986 23:31 | Moth flakes | 28 lines |
| 1170.17 | Fri Oct 31 1986 13:08 | | 5 lines |
TOPIC | 1179.0 | Pests - Termites |
| 1179.34 | Fri Jun 05 1987 13:42 | No advertising for personal profit | 6 lines |
TOPIC | 19.0 | TK50 Loading |
| 19.8 | Fri Jan 31 1986 11:55 | lost leader | 9 lines |
TOPIC | 23.0 | 2 RD53s in a BA23 Cabinet? |
| 23.2 | Thu Feb 06 1986 08:21 | It's been done before | 15 lines |
| 23.10 | Wed Feb 12 1986 08:46 | Get out your soldering irons | 32 lines |
| 23.26 | Fri Mar 07 1986 19:59 | burned again | 7 lines |
| 23.28 | Sun Mar 09 1986 20:19 | | 3 lines |
| 23.33 | Thu Apr 10 1986 16:00 | swap the drives | 4 lines |
TOPIC | 40.0 | MVII High Speed Printer Support ??? (again) |
| 40.25 | Thu Jan 15 1987 09:33 | | 8 lines |
TOPIC | 60.0 | Help, I cannot get an RD53 working on a uVAX I |
| 60.2 | Mon Mar 10 1986 19:52 | Which system box? | 4 lines |
TOPIC | 101.0 | RQDX3 RD52, RD53, Problems ?? |
| 101.2 | Wed Apr 02 1986 11:33 | It's not the jumper | 15 lines |
| 101.9 | Mon May 05 1986 11:49 | Only four UNITS support | 12 lines |
TOPIC | 114.0 | MicroVAX I in BA123 |
| 114.2 | Wed Apr 09 1986 10:35 | it's both | 32 lines |
TOPIC | 125.0 | tk50, 2 rd53's, ba123,uvaxII, WON'T BOOT |
| 125.3 | Thu Apr 17 1986 10:16 | use autoformat | 5 lines |
TOPIC | 176.0 | RQDX3 programming Specs ??? |
| 176.3 | Fri May 23 1986 17:01 | Sorry, but we can't help. | 9 lines |
TOPIC | 214.0 | Adding an RD51 to VSII |
| 214.2 | Mon Jun 16 1986 10:50 | it will work | 10 lines |
TOPIC | 231.0 | Need more disks |
| 231.2 | Thu Jun 26 1986 16:52 | keep plugging them in | 10 lines |
| 231.4 | Fri Jun 27 1986 11:21 | | 17 lines |
TOPIC | 248.0 | RD54 Info ???????? |
| 248.1 | Wed Jul 09 1986 10:49 | | 15 lines |
| 248.4 | Thu Jul 10 1986 12:18 | Check the jumpers | 27 lines |
| 248.7 | Fri Jul 11 1986 12:57 | Sorry, no performance gain | 12 lines |
TOPIC | 286.0 | RQDX3 & phantom RD51s? |
| 286.8 | Fri Aug 08 1986 10:37 | Upside down cables | 13 lines |
TOPIC | 325.0 | A Hard-Card for my �VAX/�PDP? |
| 325.1 | Wed Aug 20 1986 16:17 | | 5 lines |
TOPIC | 326.0 | Fix for Leprachaun power? |
| 326.1 | Thu Aug 21 1986 12:59 | wrong cable drivers | 6 lines |
TOPIC | 344.0 | DRQ3B internal application sites wanted |
| 344.1 | Fri Aug 29 1986 17:27 | FIFO? | 4 lines |
TOPIC | 392.0 | RD54 strapping for BA23 box? |
| 392.3 | Wed Oct 15 1986 10:18 | Ignore the floppy write protect lights | 9 lines |
TOPIC | 403.0 | RD53 deaths... |
| 403.2 | Wed Oct 22 1986 22:42 | | 28 lines |
TOPIC | 411.0 | Bus Time-out |
| 411.3 | Tue Oct 28 1986 22:31 | each DMA device has a timer | 11 lines |
TOPIC | 476.0 | Total Qbus Throughput |
| 476.5 | Mon May 18 1987 10:49 | From the RQDX3 designers | 14 lines |
TOPIC | 477.0 | RDXX termination |
| 477.1 | Fri Dec 05 1986 16:11 | My words | 35 lines |
TOPIC | 485.0 | RD50 (?!?) in the BA23 |
| 485.1 | Thu Dec 11 1986 22:28 | RD50????????????? | 7 lines |
TOPIC | 522.0 | Wed Jan 14 1987 16:10 | Removing a QVSS from a uVAX I | 10 lines |
| 522.2 | Thu Jan 15 1987 08:54 | | 3 lines |
TOPIC | 553.0 | Block mode DMA on uVII? |
| 553.1 | Tue Feb 10 1987 09:19 | Yes, no | 7 lines |
TOPIC | 589.0 | BR levels and Q-bus configurations (DHV11) |
| 589.9 | Mon Mar 16 1987 16:32 | some that don't | 7 lines |
TOPIC | 603.0 | Funct. Testing RQDX3/E |
| 603.1 | Wed Mar 11 1987 09:36 | no simple answer | 15 lines |
TOPIC | 685.0 | RX33 support in BA123 box? |
| 685.8 | Tue May 12 1987 14:08 | RQDX3/RX33 details | 43 lines |
| 685.10 | Fri May 15 1987 11:35 | The hardware is the same | 8 lines |
| 685.17 | Tue Jun 02 1987 14:02 | Use RD drive cable | 13 lines |
TOPIC | 696.0 | Q-Bus Longwords? |
| 696.3 | Fri May 15 1987 11:30 | memories not masters | 3 lines |
TOPIC | 788.0 | Does secondary page/swap file improve performance? |
| 788.2 | Fri Jul 10 1987 10:36 | Overlapped seeks on the RQDX3 | 21 lines |
TOPIC | 816.0 | RX33/RD32 |
| 816.4 | Fri Jul 31 1987 10:41 | Using the correct media? | 8 lines |
| 816.9 | Mon Aug 03 1987 10:46 | Possibly a bad RQDX3 | 8 lines |
TOPIC | 1061.0 | Disk I/O Performance |
| 1061.4 | Tue Jan 26 1988 10:05 | Two RQDX3's | 15 lines |
TOPIC | 1196.0 | HOW MANY RQDX'S |
| 1196.2 | Mon Apr 11 1988 11:03 | | 4 lines |
TOPIC | 1362.0 | Do they have to be RX-50s? |
| 1362.3 | Tue Aug 16 1988 10:20 | | 12 lines |
| 1362.7 | Tue Aug 16 1988 16:35 | Signal matching is only part of the problem | 11 lines |
TOPIC | 1365.0 | RQDX3 data transfer rates |
| 1365.1 | Tue Aug 16 1988 16:57 | | 17 lines |
TOPIC | 1384.0 | Need two 70-22393-01 |
| 1384.1 | Tue Aug 23 1988 10:29 | Don't really need them. | 5 lines |
TOPIC | 1486.0 | MicroVAX 3300,3400? |
| 1486.20 | Thu Jan 19 1989 14:06 | Partial answer | 41 lines |
TOPIC | 1561.0 | Dual Ho 33/3400 with ext RF30's |
| 1561.3 | Fri Dec 02 1988 10:06 | | 4 lines |
TOPIC | 1607.0 | Dual-host 3300/3400 availability constraints? |
| 1607.2 | Mon Jan 09 1989 10:47 | systems reconfiguration | 16 lines |
TOPIC | 1617.0 | Non-ex memory errors on Mayfair |
| 1617.1 | Wed Jan 18 1989 08:48 | NXM timer too short | 5 lines |
TOPIC | 1624.0 | How so fast? (PVAX) |
| 1624.7 | Fri Jan 20 1989 15:02 | Different memory bandwidths | 18 lines |
TOPIC | 1649.0 | Mayfair Specs ?? |
| 1649.1 | Fri Feb 03 1989 10:01 | | 4 lines |
TOPIC | 1691.0 | uVAX 3300/3400 Ethernet *NOT* DMA ? |
| 1691.1 | Thu Mar 02 1989 14:20 | From the horse's mouth (so to speak). | 6 lines |
TOPIC | 1711.0 | 3300/3400 RF30 availability (again |
| 1711.2 | Mon Mar 13 1989 15:10 | This is part of the DSSI design center | 11 lines |
TOPIC | 1738.0 | Odd problem w/ '54 in VS2000 |
| 1738.8 | Tue Apr 04 1989 09:42 | VS2000/RQDX3 format compatible | 14 lines |
TOPIC | 2013.0 | KDA50 as 1st MSCP, RQDX3 as 2nd? |
| 2013.4 | Mon Nov 06 1989 14:54 | logical or physical 1st device? | 4 lines |
TOPIC | 2075.0 | IS THE VCB02 SUPPORTED ON MAYFAIR III (KA655) |
| 2075.8 | Wed Dec 20 1989 15:45 | Qbus timeout value ECO | 9 lines |
TOPIC | 2.0 | Related conferences |
| 2.50 | Fri Jul 17 1992 11:25 | Announcing the COBRA conference | 7 lines |
TOPIC | 409.0 | Alpha interval timer |
| 409.3 | Fri Jun 26 1992 10:01 | Cobra timer interrupt | 7 lines |
TOPIC | 443.0 | Alpha...Is the Field and Sales Ready? |
| 443.34 | Thu Jul 16 1992 14:35 | Open invitation | 6 lines |
TOPIC | 585.0 | Rackmount Cobra ? |
| 585.4 | Tue Aug 18 1992 10:22 | Not planned but possible. | 4 lines |
TOPIC | 651.0 | FCC Compliance |
| 651.4 | Mon Oct 05 1992 10:30 | | 5 lines |
TOPIC | 920.0 | COBRA: SCSI => DSSI ?? |
| 920.3 | Thu Oct 22 1992 16:02 | A bit more | 29 lines |
TOPIC | 931.0 | Cobra and Ruby/Laser shippable option numbers list |
| 931.1 | Thu Oct 22 1992 17:18 | Cobra | 1 lines |
TOPIC | 975.0 | Power up problems on DEC4000 |
| 975.1 | Thu Oct 29 1992 12:35 | Help is coming | 4 lines |
TOPIC | 1006.0 | FDDI for COBRA |
| 1006.1 | Mon Nov 02 1992 13:57 | Contact for Fbus FDDI adapter | 5 lines |
TOPIC | 1078.0 | Need 2 ethernets on Cobra |
| 1078.1 | Tue Nov 10 1992 15:55 | | 30 lines |
TOPIC | 1287.0 | Morgan + Ursa? |
| 1287.10 | Thu Dec 17 1992 09:10 | for the record | 3 lines |
TOPIC | 1292.0 | Width of memory channel between cache and memory |
| 1292.9 | Wed Mar 10 1993 15:08 | | 6 lines |
TOPIC | 1318.0 | AIM's for COBRA |
| 1318.1 | Thu Dec 17 1992 11:31 | not yet | 5 lines |
TOPIC | 1709.0 | 125 - 180 MIPS / 3000 I/O/sec |
| 1709.2 | Fri Feb 19 1993 10:48 | | 22 lines |
TOPIC | 1739.0 | Alpha memory question... |
| 1739.5 | Fri Feb 26 1993 12:23 | | 7 lines |
TOPIC | 1750.0 | Alpha Cluster configuration wanted |
| 1750.4 | Wed Mar 03 1993 13:01 | Dual host DEC 4000 will do nicely | 7 lines |
TOPIC | 1884.0 | IEEE 488 interface on OpenVMS AXP? |
| 1884.2 | Mon Mar 22 1993 08:53 | DAA phone number | 5 lines |
TOPIC | 1933.0 | VME bus support? |
| 1933.1 | Fri Mar 26 1993 08:26 | hardware still under development | 8 lines |
| 1933.5 | Mon Mar 29 1993 11:25 | | 4 lines |
TOPIC | 1949.0 | My COBRA hangs while accessing CLUSTER disks. |
| 1949.4 | Wed Mar 31 1993 14:31 | Use FT4 | 4 lines |
TOPIC | 1988.0 | 4000-610 memory throughput (Cobra) |
| 1988.1 | Wed Apr 07 1993 16:16 | Digital Technical Journal Article | 4 lines |
TOPIC | 2274.0 | ?WHY? only 1 Enet with FAST SCSI Cobra? |
| 2274.3 | Wed May 26 1993 10:02 | From the Cobra's mouth, (so to speak) | 24 lines |
TOPIC | 2394.0 | Cobra on the Internet |
| 2394.24 | Tue Jun 29 1993 11:49 | We can slow it down | 8 lines |
TOPIC | 2488.0 | Memory Bus Speed? |
| 2488.1 | Tue Jul 06 1993 15:01 | DTJ articles | 5 lines |
TOPIC | 2563.0 | Cross architecture booting/Configuration questions |
| 2563.11 | Fri Jul 23 1993 11:40 | DEC 4000 storage | 17 lines |
TOPIC | 2587.0 | Looks Aren't Everything But.. |
| 2587.18 | Tue Jul 27 1993 23:31 | We'll get right to work. | 12 lines |
| 2587.40 | Tue Aug 03 1993 12:36 | definately on target | 3 lines |
TOPIC | 2617.0 | StorageWorks, RAID and AXP |
| 2617.2 | Wed Aug 04 1993 10:22 | | 5 lines |
TOPIC | 2659.0 | Help with optization of machine |
| 2659.2 | Thu Aug 12 1993 16:34 | | 12 lines |
| 2659.4 | Thu Aug 12 1993 17:34 | | 10 lines |
TOPIC | 2834.0 | power failure protection |
| 2834.1 | Wed Sep 22 1993 09:24 | | 5 lines |
TOPIC | 2845.0 | 4000-600 I/O problems |
| 2845.2 | Fri Sep 24 1993 10:27 | Someone, please pull the arrows out... | 35 lines |
| 2845.4 | Thu Sep 30 1993 12:56 | Response to questions about DN&R article | 360 lines |
TOPIC | 2852.0 | Temperature Overload |
| 2852.2 | Mon Sep 27 1993 14:54 | DEC4000 overtemperature shutdown | 6 lines |
TOPIC | 3126.0 | DSSI on DEC 7610 - Will? When? |
| 3126.1 | Mon Nov 29 1993 09:17 | Possible configuration with DEC4000 AXP | 62 lines |
TOPIC | 3145.0 | Tue Nov 30 1993 14:46 | 3 node DEC4xxx AXP Cluster | 12 lines |
TOPIC | 3158.0 | We're DEC and we don't need to sell Alpha systems |
| 3158.1 | Thu Dec 02 1993 08:21 | | 3 lines |
TOPIC | 3932.0 | DSSI cable for connecting two DEC 4710 systems? |
| 3932.1 | Fri Jun 10 1994 09:12 | BC21M-09 | 3 lines |
TOPIC | 3995.0 | Need Turbochannel Parallel interface |
| 3995.1 | Fri Jun 24 1994 09:16 | Third party | 13 lines |
TOPIC | 4215.0 | Thu Aug 25 1994 17:06 | List of 3rd party TurboChannel options | 78 lines |
TOPIC | 4526.0 | converting DEC4000 from DSSI to SCSI ?? |
| 4526.1 | Thu Dec 08 1994 09:04 | partial answer | 7 lines |
TOPIC | 4561.0 | memory problems? |
| 4561.1 | Tue Dec 20 1994 08:25 | Software support was supposed to happen... | 13 lines |
TOPIC | 4569.0 | Fast SCSI and DSSI ??? |
| 4569.2 | Thu Dec 22 1994 09:11 | some more information | 24 lines |
TOPIC | 6.0 | CJ7 - power loss/flat spot |
| 6.12 | Fri Jul 17 1987 07:52 | Try a junkyard | 17 lines |
| 6.18 | Mon Dec 07 1987 11:56 | Don't worry | 5 lines |
| 6.20 | Tue Dec 08 1987 08:02 | DASH Lights | 15 lines |
| 6.43 | Thu Feb 04 1988 07:28 | Windshield gasket? | 8 lines |
| 6.55 | Wed Apr 20 1988 09:08 | $? | 1 lines |
| 6.60 | Fri Dec 09 1988 09:30 | Belt tension | 5 lines |
TOPIC | 12.0 | Hard snow and/or ice. |
| 12.12 | Mon Jun 15 1987 09:50 | | 9 lines |
TOPIC | 13.0 | Hubs, manual vs automatic |
| 13.20 | Thu Apr 30 1987 14:39 | 4L with hubs unlocked | 14 lines |
| 13.93 | Thu Apr 07 1988 11:11 | 2WD jeeps | 14 lines |
TOPIC | 14.0 | Tires |
| 14.18 | Tue Apr 14 1987 12:22 | | 7 lines |
| 14.26 | Thu Apr 16 1987 12:38 | Bias or radial? | 7 lines |
| 14.109 | Fri May 20 1988 12:49 | Use tire radius | 7 lines |
| 14.129 | Wed Jun 15 1988 09:24 | Finding the correct tire pressure | 15 lines |
| 14.159 | Fri Sep 16 1988 13:18 | New snows | 7 lines |
TOPIC | 18.0 | Classifieds, For Sale, Wanted. Rules in 2.8 |
| 18.2600 | Wed Apr 24 1996 09:40 | Wanted: Flat Fender Jeep | 12 lines |
TOPIC | 28.0 | Lift Kits |
| 28.17 | Mon Dec 14 1987 19:55 | | 6 lines |
TOPIC | 31.0 | Who's your dealer? |
| 31.31 | Wed Nov 09 1988 06:42 | two happy customers | 5 lines |
TOPIC | 49.0 | The "shocking" question!! |
| 49.58 | Thu Feb 04 1988 07:17 | MOOG makes a CJ stabilizer | 8 lines |
| 49.61 | Thu Feb 04 1988 07:41 | Moog Stabilizer | 7 lines |
TOPIC | 53.0 | 4WD Low - When to use it? |
| 53.4 | Fri Apr 10 1987 12:23 | how about in sand? | 14 lines |
TOPIC | 55.0 | Fri Apr 10 1987 12:25 | Sand | 5 lines |
| 55.23 | Wed Apr 13 1988 12:12 | Some thoughts | 24 lines |
TOPIC | 71.0 | off road add-ons |
| 71.14 | Fri May 01 1987 11:37 | trailer ball => cannonball | 27 lines |
| 71.20 | Mon May 04 1987 10:51 | tool box and jack sources | 15 lines |
TOPIC | 78.0 | Wheel Dragging or Peg Leg |
| 78.2 | Mon May 04 1987 14:37 | different distance, same speed | 6 lines |
TOPIC | 82.0 | S10/S15 Blazer/Jimmy Note |
| 82.286 | Tue Aug 29 1989 15:14 | | 10 lines |
TOPIC | 103.0 | Jeep CJ7 Questions |
| 103.7 | Thu May 21 1987 15:49 | Plastic window cleaner | 13 lines |
| 103.19 | Wed Dec 16 1987 15:53 | intake leaks = poor idle | 11 lines |
| 103.23 | Tue Dec 22 1987 12:17 | Jeep Eagle Publications | 19 lines |
| 103.27 | Wed Jan 27 1988 09:44 | Genuine Jeep Manuals | 8 lines |
TOPIC | 104.0 | Dodge Dakota |
| 104.372 | Wed Nov 17 1993 07:30 | It's not always where you think it is. | 7 lines |
TOPIC | 105.0 | Jeep Wrangler |
| 105.12 | Thu Feb 18 1988 11:53 | Different gears | 9 lines |
TOPIC | 117.0 | light bar suggestions |
| 117.4 | Fri Jun 05 1987 13:36 | | 6 lines |
TOPIC | 122.0 | time to paint!!! |
| 122.40 | Wed Nov 16 1994 06:38 | | 6 lines |
TOPIC | 126.0 | tow hooks |
| 126.40 | Tue Feb 02 1988 07:28 | Sometimes reverse is better | 14 lines |
| 126.43 | Tue Feb 02 1988 11:10 | | 10 lines |
| 126.44 | Tue Feb 02 1988 12:07 | Receiver hitch as anchor point. | 7 lines |
| 126.48 | Thu Feb 04 1988 07:34 | | 5 lines |
| 126.51 | Fri Feb 05 1988 07:49 | CJ draw bar | 15 lines |
TOPIC | 127.0 | *PRODUCT RECALLS* |
| 127.48 | Thu Dec 09 1993 05:45 | | 5 lines |
TOPIC | 133.0 | 16" wheels for CJ-7? |
| 133.1 | Wed Jul 01 1987 20:52 | Old Jeeps had 16" rims | 5 lines |
TOPIC | 165.0 | SNO-PLOWS... where to buy? |
| 165.1 | Tue Aug 04 1987 07:42 | where | 1 lines |
TOPIC | 170.0 | Plum Island (Mass) |
| 170.1 | Thu Aug 06 1987 20:56 | You asked!! | 106 lines |
TOPIC | 191.0 | Jeep Wrangler Questions |
| 191.28 | Wed Oct 05 1988 12:26 | Clutch/shifter interlock? | 9 lines |
TOPIC | 213.0 | Jeep Cherokee Pro/Con |
| 213.16 | Tue Mar 01 1988 19:34 | Another pro | 5 lines |
| 213.49 | Mon Jul 25 1988 10:45 | | 6 lines |
TOPIC | 288.0 | Jeep CJ7 rebuild and other problems |
| 288.1 | Tue Dec 01 1987 09:24 | FRAME RUST? | 5 lines |
| 288.6 | Mon Dec 14 1987 19:50 | | 13 lines |
| 288.15 | Tue May 03 1988 11:46 | | 18 lines |
TOPIC | 290.0 | Locking hub problems on a Big Blazer |
| 290.8 | Mon Dec 07 1987 11:21 | Some things to check | 18 lines |
TOPIC | 305.0 | Mon Dec 14 1987 20:03 | Jeep CJ transmissions | 7 lines |
| 305.2 | Thu Dec 24 1987 07:17 | Just got the manual | 17 lines |
| 305.4 | Mon Jan 04 1988 08:16 | We're on the same track | 12 lines |
| 305.6 | Mon Jan 04 1988 11:15 | | 8 lines |
| 305.15 | Mon Dec 18 1989 07:16 | easy access | 8 lines |
TOPIC | 325.0 | CJ7 Steering Problem/Questions |
| 325.3 | Mon Jan 04 1988 08:54 | How to locate a bad front end U-joint | 23 lines |
TOPIC | 346.0 | Synthetic Oils. (Snake Oil?) |
| 346.60 | Fri Jul 16 1993 09:23 | | 3 lines |
TOPIC | 348.0 | The Official Heater Topic |
| 348.26 | Mon Oct 24 1994 12:41 | thermostat | 4 lines |
TOPIC | 354.0 | Jeep Wrangler Sahara |
| 354.1 | Tue Jan 26 1988 11:42 | Dealer in Leominster | 7 lines |
TOPIC | 365.0 | CJ-7 Defroster Blues |
| 365.1 | Wed Feb 03 1988 07:27 | Don't expect too much | 6 lines |
| 365.12 | Tue Feb 09 1988 08:24 | windshield modification | 16 lines |
| 365.24 | Tue Mar 29 1988 08:23 | from the manual | 28 lines |
| 365.26 | Tue Mar 29 1988 12:20 | Where the heater hoses connect | 5 lines |
| 365.28 | Tue Mar 29 1988 21:16 | the missing sentence | 8 lines |
| 365.30 | Thu Mar 31 1988 09:46 | Avoid a failure | 10 lines |
TOPIC | 383.0 | JEEP / CARB. PROBLEMS |
| 383.6 | Mon Oct 03 1988 15:55 | Oxygen sensor | 6 lines |
TOPIC | 384.0 | Soft Tops & Flaps |
| 384.4 | Thu Feb 11 1988 11:31 | Got mine from Sears | 27 lines |
| 384.10 | Mon Feb 22 1988 08:13 | Look for a picture in the Sears catalog | 7 lines |
| 384.14 | Tue Feb 23 1988 12:45 | .12 sounds about right | 5 lines |
| 384.23 | Tue Mar 01 1988 19:24 | Different top | 15 lines |
| 384.74 | Fri Mar 26 1993 11:28 | can you say OOPs! | 11 lines |
TOPIC | 389.0 | Jeep CJ7 Clutch problems |
| 389.3 | Mon Feb 22 1988 08:22 | Some points to check | 11 lines |
TOPIC | 393.0 | Jeep rims and options |
| 393.4 | Tue Mar 01 1988 19:29 | after 84? | 6 lines |
TOPIC | 402.0 | Jeep CJ Rear End |
| 402.18 | Thu May 19 1988 12:30 | Removing the rear axle hub | 14 lines |
| 402.20 | Thu May 19 1988 14:13 | Now where is that 4ft torque wrench? | 10 lines |
TOPIC | 414.0 | Repairing a leased truck |
| 414.1 | Tue Mar 08 1988 13:44 | A cheaper way out | 4 lines |
TOPIC | 420.0 | HARNESS/SEAT BELTS |
| 420.52 | Wed Aug 31 1988 14:07 | AMC belts | 4 lines |
TOPIC | 454.0 | The Official ThunderTruck(tm) Note |
| 454.71 | Tue Aug 22 1989 13:30 | | 2 lines |
TOPIC | 469.0 | Roof Racks |
| 469.5 | Thu Jun 29 1989 15:28 | It's been done before | 17 lines |
TOPIC | 502.0 | Standard .vs. Automatic |
| 502.6 | Fri May 20 1988 12:45 | | 12 lines |
TOPIC | 504.0 | Thu May 19 1988 12:38 | Jeep CJ Front Axles | 16 lines |
| 504.2 | Fri May 20 1988 12:12 | thanks | 7 lines |
| 504.4 | Wed Jun 01 1988 09:39 | Just finished | 14 lines |
TOPIC | 513.0 | New England Offroad Trips |
| 513.64 | Thu Sep 28 1989 11:46 | Anyone have a scanner? | 2 lines |
| 513.198 | Thu Jan 18 1990 09:07 | Another request for the Mill | 4 lines |
| 513.228 | Mon Feb 05 1990 08:42 | Who's next? | 5 lines |
TOPIC | 542.0 | stump removal |
| 542.2 | Thu Jun 23 1988 11:28 | | 17 lines |
TOPIC | 547.0 | Engine swapping on a CJ7 |
| 547.18 | Tue Mar 21 1989 07:28 | T18 four speed | 10 lines |
TOPIC | 549.0 | SUZUKI - INFO NEEDED |
| 549.5 | Tue Jul 26 1988 10:35 | | 2 lines |
TOPIC | 558.0 | Ignition, valve adj., general tune-up stuff. |
| 558.12 | Tue Nov 21 1989 12:59 | The computer is programmed for the stock unit. | 5 lines |
| 558.17 | Tue Nov 28 1989 12:49 | | 5 lines |
| 558.19 | Wed Nov 29 1989 13:31 | another method | 8 lines |
TOPIC | 562.0 | Jeep door handle/drilling/help |
| 562.13 | Mon Jul 25 1988 12:13 | Drill Press? | 5 lines |
TOPIC | 600.0 | Jeep Cherokee Questions (in general) |
| 600.18 | Mon May 01 1989 14:34 | vacuum leak | 13 lines |
| 600.110 | Thu Feb 25 1993 13:23 | | 6 lines |
TOPIC | 627.0 | Axle seals |
| 627.1 | Tue Sep 06 1988 14:21 | | 11 lines |
TOPIC | 643.0 | Jeep Cherokee Radio/Stereo Questions |
| 643.1 | Tue Sep 20 1988 14:04 | Some help on the outputs | 17 lines |
TOPIC | 652.0 | WANTED: INFO ON REPLACEMENT SPEAKERS |
| 652.4 | Wed Sep 28 1988 09:22 | Rear enclosures/storage cabinets | 21 lines |
TOPIC | 666.0 | Clutch Problems |
| 666.1 | Tue Oct 11 1988 13:10 | Clutch freeplay adjustment? | 9 lines |
TOPIC | 674.0 | Mon Oct 17 1988 08:50 | Jeep cooling systems | 32 lines |
| 674.2 | Mon Oct 17 1988 12:12 | How the heater is held in place. | 11 lines |
| 674.7 | Thu Dec 22 1988 11:03 | Works for me | 13 lines |
TOPIC | 695.0 | Soft Top Repairs |
| 695.8 | Wed Jul 19 1989 09:04 | I may have one. | 8 lines |
| 695.11 | Fri Aug 11 1989 13:12 | | 13 lines |
TOPIC | 797.0 | Special tools and techniques? |
| 797.1 | Mon Mar 27 1989 15:23 | | 23 lines |
| 797.25 | Wed Jun 07 1989 13:16 | Air ratchet worked for me | 10 lines |
TOPIC | 801.0 | ALTERNATOR PROBLEM? |
| 801.12 | Thu Aug 17 1989 09:59 | My method | 9 lines |
TOPIC | 820.0 | Jeep idle/stall problem |
| 820.13 | Wed Jul 19 1989 13:20 | The fix for my stalling problem. | 25 lines |
| 820.79 | Thu Feb 25 1993 12:13 | check the underhood connectors | 10 lines |
TOPIC | 884.0 | JEEP\CJs\Gear ratio\Differential |
| 884.2 | Thu Jul 20 1989 14:26 | Look for the letters | 17 lines |
TOPIC | 922.0 | Jeep won't start - No Spark |
| 922.5 | Tue Sep 19 1989 12:10 | | 7 lines |
TOPIC | 956.0 | Tune up problem on CJ7 1986 258 CU 5 speed |
| 956.1 | Fri Oct 27 1989 15:36 | Check the distributor | 16 lines |
TOPIC | 968.0 | Jeep CJ5 questions and answers |
| 968.23 | Mon Nov 07 1994 09:19 | | 8 lines |
TOPIC | 969.0 | Cherokee maintenence questions... |
| 969.90 | Wed Aug 11 1993 15:15 | Cherokee front wheel bearing replacement | 30 lines |
| 969.92 | Fri Aug 20 1993 13:37 | | 16 lines |
| 969.94 | Mon Aug 23 1993 13:24 | hub puller | 12 lines |
| 969.96 | Tue Aug 24 1993 14:46 | It must come out as one piece. | 8 lines |
| 969.105 | Thu Aug 26 1993 14:58 | | 19 lines |
TOPIC | 975.0 | CJ7 brake (caliper) problems |
| 975.2 | Thu Nov 16 1989 11:19 | Possible moisture problem | 7 lines |
TOPIC | 984.0 | DETONATION!!! |
| 984.14 | Wed Dec 06 1989 13:58 | | 11 lines |
TOPIC | 1065.0 | OLD JEEP PARTS |
| 1065.5 | Tue Mar 20 1990 11:39 | Check for rust | 11 lines |
TOPIC | 1257.0 | Ford Explorer Ratings Wanted |
| 1257.147 | Wed May 05 1993 12:22 | | 7 lines |
| 1257.224 | Mon Nov 21 1994 11:26 | Tow hooks | 6 lines |
| 1257.226 | Tue Nov 22 1994 07:41 | It's not the hooks, it's a place to mount them. | 10 lines |
| 1257.229 | Tue Nov 22 1994 10:34 | | 13 lines |
| 1257.241 | Tue Dec 13 1994 08:31 | | 12 lines |
TOPIC | 1275.0 | WILLYS Note |
| 1275.52 | Mon Dec 05 1994 08:46 | | 11 lines |
TOPIC | 1502.0 | Noisy brakes on a Suzuki Sidekick |
| 1502.8 | Thu Dec 09 1993 05:47 | Colonial Automotive | 4 lines |
TOPIC | 1544.0 | Explorer alert!!! |
| 1544.2 | Wed Dec 21 1994 13:35 | Emergency brake | 4 lines |
TOPIC | 96.0 | Tap and die questions |
| 96.2 | Mon Jul 24 1989 14:17 | odd taps | 4 lines |
TOPIC | 106.0 | Air compressors - everything you ever needed to know |
| 106.10 | Mon Mar 17 1986 09:54 | | 8 lines |
TOPIC | 116.0 | AP10 Such a deal!!! |
| 116.12 | Tue Jan 13 1987 09:46 | Nothing is "FREE" | 12 lines |
TOPIC | 120.0 | Universal vs induction motors |
| 120.6 | Sun Apr 27 1986 23:06 | | 4 lines |
TOPIC | 121.0 | How to buy a Bandsaw? |
| 121.4 | Fri May 09 1986 10:46 | Thought about metal cutting? | 7 lines |
| 121.48 | Tue Mar 21 1989 09:57 | Another request for a mail order source | 6 lines |
| 121.51 | Wed Mar 22 1989 11:37 | blade assortment | 30 lines |
TOPIC | 122.0 | Fri May 09 1986 10:59 | Shop tips | 21 lines |
TOPIC | 133.0 | Shop vac advice wanted. |
| 133.4 | Tue Jun 10 1986 14:33 | | 16 lines |
| 133.15 | Fri Jul 18 1986 14:31 | local to Maynard | 5 lines |
TOPIC | 177.0 | BELT SANDERS?????? |
| 177.19 | Wed Dec 13 1989 15:02 | use paint remover first | 5 lines |
TOPIC | 212.0 | Non-toxic finishes/fillers |
| 212.8 | Wed Nov 30 1988 08:39 | Mineral oil, not vegetable oil | 5 lines |
TOPIC | 216.0 | How to make Bookcases |
| 216.16 | Thu Dec 04 1986 12:31 | Yet another trick | 21 lines |
TOPIC | 226.0 | Table saw blade guards |
| 226.16 | Thu Dec 18 1986 14:28 | a little reminder | 15 lines |
| 226.25 | Tue Dec 30 1986 11:04 | | 9 lines |
TOPIC | 227.0 | Cordless Screwdriver and Friends... |
| 227.31 | Thu Aug 25 1988 14:50 | Reconditioned anyone? | 10 lines |
| 227.33 | Fri Aug 26 1988 15:37 | | 4 lines |
TOPIC | 277.0 | Drilling Pearls? (yes, really) |
| 277.5 | Fri Feb 27 1987 15:35 | Tiny drill press | 12 lines |
TOPIC | 279.0 | Air Compressors |
| 279.7 | Tue Apr 07 1987 21:18 | The filter should do it. | 8 lines |
| 279.12 | Tue Apr 14 1987 17:22 | | 7 lines |
TOPIC | 288.0 | Dado & shaper blades |
| 288.4 | Wed Mar 11 1987 22:21 | paper shims | 6 lines |
TOPIC | 299.0 | Grizzly 18 inch bandsaw |
| 299.5 | Wed Apr 01 1987 22:41 | | 2 lines |
| 299.10 | Wed Apr 08 1987 13:54 | Speed control | 6 lines |
TOPIC | 302.0 | Wheelbarrows ? |
| 302.9 | Thu Apr 02 1987 14:32 | | 5 lines |
TOPIC | 303.0 | Sawzall choices? |
| 303.7 | Wed Apr 01 1987 22:38 | | 9 lines |
TOPIC | 320.0 | AIR-TOOLS |
| 320.8 | Mon Sep 11 1989 13:30 | DA Sander question | 12 lines |
| 320.10 | Thu Sep 14 1989 10:18 | | 6 lines |
TOPIC | 343.0 | Drill Bit Sharpening |
| 343.3 | Tue Jun 09 1987 16:29 | Sears for twice | 4 lines |
| 343.12 | Wed Feb 08 1989 09:07 | DIY | 8 lines |
TOPIC | 425.0 | Hard to Find Band Saw Blades |
| 425.3 | Mon Aug 01 1988 14:42 | I want a variety of blades | 36 lines |
TOPIC | 458.0 | Drill Press Advice, Anyone? |
| 458.25 | Wed Aug 10 1988 14:53 | | 11 lines |
| 458.28 | Mon Aug 15 1988 11:13 | Force Machinery | 12 lines |
TOPIC | 495.0 | Looking for rough cut maple/pine/cherry |
| 495.5 | Tue Jan 26 1988 15:34 | Butler Lumber | 7 lines |
TOPIC | 498.0 | Welding Your Own Bandsaw Blades????? |
| 498.3 | Wed Feb 03 1988 12:43 | | 7 lines |
TOPIC | 614.0 | Managing metal disks... |
| 614.3 | Tue May 24 1988 14:06 | Some methods | 17 lines |
| 614.9 | Wed May 25 1988 22:30 | another idea | 17 lines |
TOPIC | 785.0 | The New Yankee Workshop note |
| 785.72 | Tue Feb 07 1989 10:02 | | 3 lines |
TOPIC | 805.0 | Sk verses Craftsmen Tools |
| 805.6 | Fri Feb 03 1989 12:54 | SK has the same warantee | 10 lines |
TOPIC | 864.0 | TWISTING CHAINSAW |
| 864.3 | Tue Mar 21 1989 10:41 | check the bar | 5 lines |
TOPIC | 1048.0 | Weatherproofing Wood |
| 1048.6 | Tue Nov 14 1989 10:48 | Don't forget the right glue | 4 lines |
TOPIC | 1056.0 | looking for air compressor |
| 1056.3 | Tue Nov 21 1989 09:15 | Sear ok by me | 7 lines |
TOPIC | 1104.0 | Tool humor |
| 1104.2 | Tue Jan 02 1990 14:26 | Not so new | 6 lines |