| Title: | Optical Products |
| Moderator: | TAPE::SENEKER |
| Created: | Wed May 04 1988 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 841 |
| Total number of notes: | 3218 |
New twist on the -intdiv divide by zero error.
We had a RW536 with a "semi-bad" AC module cause these errors.
Any platter we tried to mount gave the %mount-f-intdiv
error. Config 40 was set to off. V3.3-1 OSMS VMS5.5-2.
MCR SCSI doing inquire on the jukebox showed ...? instead
of ...DEC RW516 . We changed config 40 to on(hp mode instead
of DEC mode), inquire showed ...HP C1715t, then all the
platters would mount just fine.
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 773.1 | TAPE::SENEKER | Head banging causes brain mush | Wed Feb 05 1997 15:09 | 11 | |
This was most likely due to the fact that the VMS I/O function
PACKACK causes a SCSI INQUIRY command to happen and if it
fails the SCSI READ_CAPACITY was not called so the geometry
information was not available. This lead to the divide by
zero in INIT.
Good data point Robby, the people that try to isolate problem
causes need to see the variation of things that cause this
kind of problem.
Rob
| |||||