| Title: | WinNT-Clusters |
| Notice: | Info directories moved to DECWET::SHARE1$:[NT_CLSTR] |
| Moderator: | DECWET::CAPPELLOF |
| Created: | Thu Oct 19 1995 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 863 |
| Total number of notes: | 3478 |
Hi,
I have configured two AlphaServer 1000A with Raid 310 as an NT Cluster.
Currently my AlphaServer is running NT 3.51 with service pack 5, NT
Cluster V1.0 with SP 1 and HSZ20 firmware ver 2.7.
Will that be a problem if I do not upgrade the controller to ver 3.0 ?
What is the different between HSOF ver 3.0 and 2.7 ?
I have tried to upgrade the firmware of the controller to v3.0 using
the Raid Manager on the primary Server. I copy the image file V30Z.IMG
on the hard disk of the primary server and select configuration =>
controller => load firmware. I select the image file V30Z.IMG and click
OK. It starts downloading using kermit for an hour.
After completion, I reboot the Raid 310 and the Server but the Raid
Manager still show that the firmware of the controller as ver 2.7.
Why does the firmware of the controller not updated as requested ?
Secondly, I could not locate any option in the Raid Manager for rebuilt
or reconstruction of failed disk. Any clues ?
Thanks
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 652.1 | DECWET::DGOODMAN | Mon Feb 24 1997 15:32 | 4 | ||
You need to get a cluster upgrade kit from storage works. Firmware 2.7 does NOT work with clusters. The kit comes with the docs, class driver, raid manager, and firmware required. There are also configuration procedures. | |||||
| 652.2 | try the supported procedure | MSE1::PCOTE | Rebuilt NT: 163, Rebuilt VMS:1 | Tue Feb 25 1997 14:31 | 12 |
> on the hard disk of the primary server and select configuration =>
> controller => load firmware. I select the image file V30Z.IMG and click
> OK. It starts downloading using kermit for an hour.
Though the option exists in the GUI, this is NOT the supported
procedure to upgrade the firmware. And you ask storageworks
engineering as to why.
Read note thread 615.* for more information.
note 615.3 mentions the manual you'll need to perform the upgrade.
| |||||