| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 756.1 | more info... | NETRIX::"[email protected]" | Gary Kerrison | Wed Apr 17 1996 19:08 | 13 |
| 756.2 | | SMURF::LABONTE | | Fri Apr 19 1996 18:40 | 15 |
| 756.3 | lat=supported tcpip!=supported ? | NETRIX::"[email protected]" | gk | Tue Apr 30 1996 09:35 | 20 |
| 756.4 | There isn't a supported solution | SMURF::LABONTE | | Tue Apr 30 1996 15:10 | 30 |
| 756.5 | aha! | NETRIX::"[email protected]" | gk | Wed May 01 1996 09:40 | 31 |
| 756.6 | Do you have an ln17ps printer? | SMURF::LABONTE | | Wed May 01 1996 14:10 | 7 |
| 756.7 | instructions for using LAT on an LN17 | SMURF::GRAHAM | | Wed Feb 05 1997 20:06 | 20 |
|
I've got the LN17 ps with the NIC card. Can't seem to get LAT working
from ANY platform VMS or UNIX or Ultrix. There is no communication
whatsoever. VMS gets "printer not ready", unix/ultrix gets "waiting
for printer to come online" etc...
I can use VMS via ncp to connect to the console utility via the
hardware address, so its on the net and reachable.
I've double checked the "so called" Service Name and port info, its
all set correctly and matches the printcap or dcps entry.
I haven't done any "install" from the provided software because tcp/ip
is NOT an option for me. There was no indication that anything had to
be "setup" for the LAT protocal to be used. Is there?
Thanks for any help...
-Dave
|
| 756.8 | have you set the group codes? | REGENT::POWERS | | Thu Feb 06 1997 14:42 | 7 |
| <> <<< Note 756.7 by SMURF::GRAHAM >>>
> -< instructions for using LAT on an LN17 >-
>
>
> I've got the LN17 ps with the NIC card. Can't seem to get LAT working
Have you set the group codes?
|
| 756.9 | parameters ? | EVTAI1::BROCHARD | Manuel Brochard - French CSC | Wed Feb 12 1997 15:12 | 4 |
|
Which remote node name and remote port name are you using ?
Manuel.
|
| 756.10 | more info... | SMURF::GRAHAM | | Wed Feb 12 1997 19:06 | 10 |
| I've got the group code on the ln17 at 0 , which I've beentold is to
allow all groups. It was the defualt so I didn't actually change it.
The group codes as far the the systems are set to what all other
printers use in the same enviormwnt as this ln17.
I'm using the Service name DNE106802 and PORT_1 (all caps). Have tried
many variations on this as well.
Dave
|