Conference kernel::cisco

509.0. "X25 config problem" by OTOOA::kap954.kao.dec.com::MMcgregor () Tue May 06 1997 16:45

I am trying to configure a 2501 with TCP/IP over x25.  The remote router is 
connected to a different carrier for the x25 service.  When configuring the 
x25 map for the IP address to the DTE of the remote router I have encounter 
an address problem.

Remote IP Address    196.39.129.1
Remote	DTE	     031344152402800


The local carrier tell me that to initiate the inter carrier call I need to 
put a leading 1 on the DTE address.

When I do the x25 map command i get and invalid DTE address because the 
address field is exceeded.

x25 map IP 194.39.129.1 1031344152402800

invalid command

x25 map IP 194.39.129.1 1031344152402800
                                       ^

is there some way of telling the router interface that this is an 
inter-carrier call and to insert the leading 1.

Thanks,
Malcolm

Have you tried taking the trailing 00's as these are the
 default sub-address anyway
e.g x25 map IP 194.39.129.1 10313441524028

also have you checked whether the other end requires this?

regards

Steve Gifkins
  
[Posted by WWW Notes gateway]