Conference kernel::cisco

500.0. "NTP config" by OTOOA::kap430.kao.dec.com::mbaker () Thu Feb 27 1997 16:16

Hi,

I am trying to cnfigure NTP on the cisco to use an xntp v2 server :

I get the following debug info :

NTP: xmit packet to 'ip address':
 leap 3, mode 3, version 2, stratum 0, ppoll 64
 rtdel 0000 (0.000), rtdsp 10000 (1000.000), refid 00000000 (0.0.0.0)
 ref 00000000.00000000 (00:00:00.000 UTC Mon Jan 1 1900)
 org B6C02F70.2C797000 (16:06:08.173 UTC Thu Feb 27 1997)
 rec B04F955B.D8859515 (04:13:15.845 UTC Sun Sep 26 1993)
 xmt B04F959B.D5B0559A (04:14:19.834 UTC Sun Sep 26 1993)
NTP: rcv packet from 'ip address':
 leap 3, mode 4, version 2, stratum 0, ppoll 64
 rtdel 0000 (0.000), rtdsp 0000 (0.000), refid 00000000 (0.0.0.0)
 ref 00000000.00000000 (00:00:00.000 UTC Mon Jan 1 1900)
 org B04F959B.D5B0559A (04:14:19.834 UTC Sun Sep 26 1993)
 rec B6C02FB0.2CB96000 (16:07:12.174 UTC Thu Feb 27 1997)
 xmt B6C02FB0.2CF96000 (16:07:12.175 UTC Thu Feb 27 1997)
 inp B04F959B.D8856CA3 (04:14:19.845 UTC Sun Sep 26 1993)
NTP: packet from 205.210.189.1 failed validity tests 20


What does the 'failed validity tests 20' means ???
The Cisco documentation does not say anything about the NTP debug output
and how to use it ???? Is there som doc that describes the failed tests
??

Tx

Michel