| Title: | TurboLaser Notesfile - AlphaServer 8200 and 8400 systems |
| Notice: | Welcome to WONDER::TURBOLASER in it's new home shortly |
| Moderator: | LANDO::DROBNER |
| Created: | Tue Dec 20 1994 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 1218 |
| Total number of notes: | 4645 |
This pertains to the internal storage drawers in the AlphaServer
8200 and 8400, i.e the BA656-AA and the BA660-AB.
1. What are the redundant shelf power supply part nos for -
BA656-AA -
BA660-AB -
2. Can these redundant shelf power supplies be put into any slot,
or do they occupy specific slots ?
Thanks in advance.
Nandan
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1183.1 | 8200 and 8400 use the BA35X-HG (48VDC power supply) | LANDO::DROBNER | TurboLaser Engineering - 8200/8400 | Tue Apr 29 1997 13:36 | 18 |
Remember on both the 8200 and 8400 systems we run the "internal"
StorageWorks shelves off of 48VDC power. YOU must select the
redundant power supply for the StorageWorks shelve that has a
input voltage of 48VDC.
The part number to use is; BA35X-HG
See System and Options catalog (SOC) 8400 page 2.188 (7-APR-97).
Where to place this BA35X-HG redundant power supply -- YOU must
place the power supply NEXT the existing power supply in that
StorageWork shelve. The reason for this is that the BA35X-HG
includes a short "Y-cable" to allow both power supply to connect
to the 48VDC pigtail from the system (only one pigtail per shelve
is available).
/Howard
| |||||
| 1183.2 | Thank you | HGOVC::NANDAN | Wed Apr 30 1997 02:04 | 6 | |
Howard,
Thank you for that very explicit answer.
Nandan
| |||||