[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | TurboLaser Notesfile - AlphaServer 8200 and 8400 systems |
| Notice: | Welcome to WONDER::TURBOLASER in it's new home shortly |
| Moderator: | LANDO::DROBNER |
|
| Created: | Tue Dec 20 1994 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 1218 |
| Total number of notes: | 4645 |
1166.0. "*** CPU 0 NVR invalid... after firmware change" by COPCLU::FTHOMSEN (Frank N. Thomsen @DMA, 857-3625) Tue Apr 08 1997 10:20
I did a firmware DOWNGRADE from 4.1-6 to 4.0-4 on a 4 cpu 8400 5/440.
(I will upgrade to 4.8-6 later today, when I get the MOP set up properly)
Did a >>>build -e on all 4 cpu's
(Did NOT do a >>build -n, release notes doesn't say so, but note 1162 does)
Got this after INIT:
08-Apr-1997 10:26:37 AlphaServer 8400 Console V4.0-4, 15-AUG-1996 15:02:37, SROM V3.1
08-Apr-1997 10:26:38 Configuring I/O adapters...
08-Apr-1997 10:26:38 kzpsa0, slot 2, bus 0
08-Apr-1997 10:26:44 tulip0, slot 3, bus 0
08-Apr-1997 10:26:51 pfi0, slot 5, bus 0
08-Apr-1997 10:26:55 kzpsa1, slot 6, bus 0
08-Apr-1997 10:27:01 kzpsa2, slot 7, bus 0
08-Apr-1997 10:27:07 pfi1, slot 9, bus 0
08-Apr-1997 10:27:11 kzpaa0, slot 11, bus 0
08-Apr-1997 10:27:11
08-Apr-1997 10:27:11 *** Errors during powerup, check event log ***
08-Apr-1997 10:27:12
..
08-Apr-1997 10:28:25 P00>>>cat el
08-Apr-1997 10:28:28 08:25.45 Starting console on CPU 0
08-Apr-1997 10:28:28 08:25.45 initialized idle PCB
08-Apr-1997 10:28:28 08:25.45 initializing semaphores
08-Apr-1997 10:28:28 08:25.45 initializing heap
08-Apr-1997 10:28:28 08:25.45 initial heap 100000
08-Apr-1997 10:28:28 08:25.45 memory low limit = 1f2000
08-Apr-1997 10:28:28 08:25.45 heap = 100000, f1fc0
08-Apr-1997 10:28:28 08:25.45 initializing driver structures
08-Apr-1997 10:28:28 08:25.45 initializing overlays
08-Apr-1997 10:28:28 08:25.45 initializing idle process PID
08-Apr-1997 10:28:28 08:25.45 initializing flash index
08-Apr-1997 10:28:28 08:25.45 hf_init
08-Apr-1997 10:28:28 08:25.45 Transferring to xdelta
08-Apr-1997 10:28:28 08:25.45 *** CPU 0 NVR invalid, adr b0000a40, data ad, expected 11 ***
08-Apr-1997 10:28:28 08:25.45 *** CPU 0 NVR invalid, adr b0000a80, data 00, expected 12 ***
08-Apr-1997 10:28:28 08:25.45 initializing file system
08-Apr-1997 10:28:28 08:25.45 DDB Startup, phase = 0
..
System boots fine...
Will an >>>build -n cure this?
Regards
Frank Thomsen
MCS Denmark