Conference wonder::turbolaser

1100.0. "HELP WITH PCIACONFL ERROR" by WARFUT::MELLING () Mon Feb 10 1997 19:07

    
    Hello,
    
    	We have a problem on a customer site where a DWLPA-CA was to be
    	installed onto an AS8200 running Decunix V3.2c.
    	The console f/w was upgraded to v3.1-6 from the V3.6 f/w CD as
    	the DWLPA had the newer mother board fitted.
    	Two KZPSA's at rev A10 were fitted to the DWLPA and subsequently 
    	connected to HSZ40's and all of the appropriate disks could be seen 
    	at the console level.
    
    	In trying to boot the operating system we encountered a system
    	panic :
    
    	panic ( cpu 10 ) : ppciaconfl: get_bus failed
    
    
    	The PCI shelf was disconnected at the KFTIA port and the system 
    	boots fine.
    
    	Has anybody seen similar to the above,note 1008 indicates something
    	similar.Is this a unix problem,possibly a kernel rebuild or a
    	hardware problem.
    
    
    
    regards
    tony melling 
    ( Warrington UK )
    
    

    
    Did you boot with genvmunix and build a new kernel that included the
    new hardware?
    
    	/gary