[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference napalm::musclecars

Title:	Musclecars
Notice:	Noter Registration - Note 5
Moderator:	KDX200::COOPER

Created:	Mon Mar 11 1991
Last Modified:	Mon Jun 02 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	182
Total number of notes:	5467

166.0. "LOOKING FOR INPUT ON DART HEADS" by IAGO::PROVENCAL () Mon Aug 28 1995 09:13

Hi,

My husband and I currently have a 67 camaro.  He'd like to start rebuilding another moter that's just sitting
in the garage.  I think it's a Chevy Small block 327.  Last Friday we went to the Leominster Sheraton Cruising 
were admiring an older corvette (think it was a 69) ... anyways, Bruce got talking to the owner, and listening
to the motor run.  The guy said he had a small block in it with Dart Heads.

I was wondering if anyone out there had any info about these heads?  Anyone bought them, used them, liked
them, what's the cost, where did you get them?   etc.

Thanks,

Cathi Provencal

T.R	Title	User	Personal Name	Date	Lines
166.1		VMSNET::M_MACIOLEK	Four54 Camaro/Only way to fly	`Mon Aug 28 1995 10:50`	17
	Dart heads are usually better than stock heads, assuming you have a low hp small block. If you have the 2.02 heads and small cc chambers already you won't get much benefit. The dart heads usually have the intake/exhaust ports/runners cleaned up for better flow. I guess they sell for ~$500/pair - bare. You can buy them from any speed shop/mail order. I believe they are made by World products. I looked into these at one time. I looked at Brodix, Dart/Merlin, and Edlebrock Performer. I'm broke so I'ma gonna wait a while. I think this is a nobrainer, I'm gonna get the Merlin heads for $477 and skip the $1500 aluminum heads. Regards, MadMike
166.2	there are also better heads than darts...	CSC32::J_KALINOWSKI	Forget NAM?....NEVER!	`Mon Aug 28 1995 10:52`	8
	Every high performance parts catalog within 4 light years from earth has them listed....Here's the number for SUMMIT racing. They'll send you a freebie catalog 1-216-630-0200 -john
166.3	Camero Heads	POLAR::GHATTAS		`Sun Jun 09 1996 11:48`	17
	Cathi, Depending on what your building the Camero for, such as a everyday vehicle or a show and race car. If you are planning on driving the car everyday you are better of going with cast iron heads, but if you are turning your car into a racer go with the Dart Alum. Heads, you won't go wrong. Also if you have a budget on Alum. heads Edelbroke sells a really good set of heads for Small Block Chevy, they are called Performer RPM. P.S.Oldmobiles Fly not Cameros George
166.4	Check the emblems	ASABET::HAMEL		`Mon Jun 10 1996 07:35`	4
	What's a CAMERO?????????? mh
166.5	Olds ?	HOTLNE::MALESKY		`Mon Jun 10 1996 12:54`	5
	What's an OLDmobile ???????? JM
166.6	OLDmobile	MKOTS3::VICKERS		`Mon Jun 10 1996 13:21`	2
	What your father drove!