Conference napalm::commusic_v1

92.0. "ibanez info" by PIPA::JANZEN () Wed May 01 1985 12:19

Two days ago I received an Ibanez Signal Processor and accessory
price list and some data.

The suggested retail price list is as follows:
DDL Digital Delay Pedal 1 s 7kHz $225
DCL Digital Chorsu 		$210
DFL Digital Flanger 		$210
AFL Auto Filter 		$125
BCL Bimode Chorus 		$140
BPL Bi-Stage Phaser 		$115
CPL Comporessor 		$99.5
FLL Flanger 			$135
GEL 7 band EQ 			$125
PQL Parametric EQ 		$125
SML Super Metal Distort 	$99.5
STL Super Tube Distort 		$94.5
DUE300 Digital Multi-Effect, Super Metal, Chorus, Delay To Be Announbced
DUE400 Programmable Dgital Multi-Effect; Super Metal, Chorus,/Flange,Delay
comp/limit,MIDI TBA
PC40 Harmonics reset controller for HD1500 $170
EPP400 Effect-Patch Programmer, MIDI TBA
IFCf60 Intelligent Foot Controller for DUE 400/EPP400 TBA

Accessories
AC109 AC adapt 				$18
FS1L Footswitch 			$22
FS1M momentary footswi 			$22
4564 FX Fale-Male Connector 		$6
EBL5 Rackmountable FX case all cables TBA
RDS800 Rack STand w/2 wheels 		$100
RDS900 19 heavy duty Rack Stand w 4 wheels $175

All of the following devices are shown in the pictures with rack mount hardware

DM1100 Digital Delay 			$329
Controls:  Input level,Tone, delay range select, delay time, width,
speed, feedback(pull invert), dry level, delay level, effect/bypass,
switch, hold switch.
Jack:Footswitch/Hold jack; Footswitch Bypass-Effect jack;
Output/Invert-Mix Jack;Out/Mix Jack;Output/Dry Jack;Input Jack.
Delay time: 7ms to 3.6 s
freq resp: 30Hz to 8kHz delayed; 30Hz to 20kHz Dry.
Input, 500kohms 0dB Gain
Mic Z 5k ohms, Gain 30dB
Z Out <10kohms
Tone 6kHz =/- 12dB
Max in Level: delay: +17dBm, dry: 17dBm
Equivalent input noise : -95dBm (IHF-A,Input-shorted)
Total harmonic Distortion: Delay <1%,dry:<.2%
19"*1.8"*9.2"

GE 1502 Graphic EQ $325
Dual 2/3 8va Eq.  Two Channels, 2/3 8va bands
Freq response: +/- .5dB, 20Hz-20kHz
Centers: 25Hz to 16kHz
Total harmonic Distortion <.02%
Hum and Noise  <-95dBm
gain +/-12dB +/-6dB
Maximum Input Level +20dB
Z In 47kohms balanced
range of Boost and cut +/-12dB, +/-6dB
Hi Pass 40Hz(18dB/8va)
Max Out +20dBm
Z Out 220 Ohms unbalanced
19*1.75*9.2"

GE3101 Graphic Equalizers $325
1/3 8va eq;  1 channel, 1/3 8va bands
Freq response: +/- .5dB, 20Hz-20kHz
Centers: 20Hz to 20KHz
Total harmonic Distortion <.02%
Hum and Noise  <-95dBm
gain +/-12dB +/-6dB
Maximum Input Level +20dB
Z In 47kohms balanced
range of Boost and cut +/-12dB, +/-6dB
Hi Pass 40Hz(18dB/8va)
Max Out +20dBm
Z Out 220 Ohms unbalanced
19*1.75*9.2"

MSP1000 Multi Signal Processor $449
Three separate devices, can be patched on the back or internally connected
Compressor/limiter,15 band 2/3 8va EQ, Notch Filter, 

HD1500 Harmonics Delay	$559
I think this is a harmonizer or a pitch transposer.
   the HD1000 is no longer listed, I guess.
13 semitones pitch shift.  Can use PC40 which stores 3 harmonic pitches random
access and switches between harmonic modes and bypass. 30ms processing time.
Can flange and chorus I guess.  Has Modulation speed and width control.
Its LED numeric readout gives the pitch shift in cents, yet, or the millisec
delay.  .5 s delay but @ 2kHz BW (PU).  126ms @ 8kHz; 252ms @4kHz

DMD2000 Programmable Digital Delay $550
Flanges, choruses.  0.1ms to 2s delay.  16K BW.  Can use FC40.

FC40 Footswitch Controller for DMD2000 programs $180 has 6 switches on it, 
four for programs, one for effect or bypass, one for hold.

I don't have any experience with this stuff at all.  I do not own stock in
Ibanez.  I might have gotten all the specifications and prices completely
wrong.
Thomas Janzen DEC Marlboro MA