[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference kali::dewbr

Title:DECbrouter-90T2,-T2A,-T1
Notice:Kits, DOCs, Release notes, SPDs notes 1-10
Moderator:FOUNDR::SHEEHAN
Created:Wed Dec 23 1992
Last Modified:Thu Jun 05 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:1313
Total number of notes:4889

1307.0. "LINK-3-TOOBIG messages on Ethernet Interface" by GIDDAY::LEUNG () Thu May 15 1997 04:34

Brouter90T V11.1(8)

Customer is seeing these messages on 2 of these brouters on remote sites
connected through Frame Relay.
"Show version" says V11.1(8). But I could not find any reference to released
version of V11.1(8) for Decbrouters. Did the customer put a Cisco router
image on the brouter?

Thanks
Dennis
           
May 14 10:24:21 mora 113: %LINK-3-TOOBIG: Interface Ethernet0, Output packet size of 1553 bytes too big
May 14 10:24:21 mora 114: -Traceback= 3039678 30F1D16 3161890 3161938 3161B00 3039368 30388DC 313D30C 30388A0 100057A 100B3F0
May 14 10:41:47 mora 115: %LINK-3-TOOBIG: Interface Ethernet0, Output packet size of 1553 bytes too big
May 14 10:41:47 mora 116: -Traceback= 3039678 30F1D16 3161890 3161938 3161B00 3039368 30388DC 313D30C 30388A0 100057A 100B3F0
May 14 11:36:29 mora 117: %LINK-3-TOOBIG: Interface Ethernet0, Output packet size of 1553 bytes too big
May 14 11:36:29 mora 118: -Traceback= 3039678 30F1D16 3161890 3161938 3161B00 3039368 30388DC 31428BE 35077B4
May 15 09:31:40 dara 27: %LINK-3-TOOBIG: Interface Ethernet0, Output packet size of 1553 bytes too big
May 15 09:31:40 dara 28: -Traceback= 3039678 30F1D16 3161890 3161938 3161B00 3039368 30388DC 31DC708 31402A8 313D30C 30388A0 100057A 100B3F0
May 15 09:34:03 dara 29: %LINK-3-TOOBIG: Interface Ethernet0, Output packet size of 1553 bytes too big
May 15 09:34:03 dara 30: -Traceback= 3039678 30F1D16 3161890 3161938 3161B00 3039368 30388DC 31424D8 313D30C 30388A0 100057A 100B3F0


mora#sh ver

Cisco Internetwork Operating System Software 
IOS (tm) 3000 Software (IGS-J-L), Version 11.1(8), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Thu 05-Dec-96 11:41 by tamb
Image text-base: 0x03038820, data-base: 0x00001000

ROM: System Bootstrap, Version 4.14(8), SOFTWARE

mora uptime is 1 week, 4 days, 8 hours, 38 minutes
System restarted by power-on
System image file is "igs-j-l_.bin", booted via flash

DECbrouter 90 router (68030) processor (revision A) with 6144K/2048K bytes of memory.
Processor board ID 00000000, with hardware revision 00000000
Bridging software.
SuperLAT software copyright 1990 by Meridian Technology Corp).
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
TN3270 Emulation software (copyright 1994 by TGV Inc).
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
T.RTitleUserPersonal
Name		DateLines
1307.1Check your Serial Interface MTU SizeFOUNDR::SHEEHANFri May 16 1997 11:1540

 Hi Dennis,

 I'd suspect that the MTU size is larger than the default setting of
 1500 on the Serial interface connected to the Frame Relay Network.
 If this is the case then change the MTU on the routers on both sides
 of the WAN link to 1500.

Use SHOW INTERFACE command to check

Router# show int e 0
  Ethernet0 is up, line protocol is up
  Hardware is Lance, address is 0800.2bb3.fa5e (bia 0800.2bb3.fa5e)
  Internet address is 39.5.5.30/24
  MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely 255/255, load 1/255

Router# show int s 0
Serial0 is up, line protocol is down
  Hardware is MK5025
  Internet address is 2.2.2.1/24
  MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, rely 255/255, load 1/255

If the above is not the case then please send a WRITE TERM output from
the router as well as SHOW INTERFACE and SHOW VERSION


Now as far as 11.1(8) is concearned... This kit was never made available
from Digital for the DECbrouter. So if they are running an IOS they
copied from another Cisco router then please explain to them this is not
recomended by Digital and will not be Supported if problems arise. If they
need a version 11.1 image tested and blessed for the DECbrouter then we
can provide that for them. The current 11.1 kit being released is 11.1(6)
although we have 11.1(10) available as well.

 Regards...

 Neil Sheehan
 NPB/NSTG Router Support
1307.2IAMOSI::LEUNGTue May 20 1997 23:43236
RE: .1

Hi Neil,

The MTU looks ok on the interfaces. Please find below the running configuration
and also the running version. They have V11.1(8) on the brouter and could it be
the cause of these messages?

Thanks
Dennis


PIRD#sh int
Ethernet0 is up, line protocol is up
  Hardware is Lance, address is 0800.2bb5.ae4c (bia 0800.2bb5.ae4c)
  Internet address is 146.178.79.4/24
  MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely 255/255, load 2/255
  Encapsulation ARPA, loopback not set, keepalive set (10 sec)
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:00:00, output 00:00:00, output hang never
  Last clearing of "show interface" counters never
  Queueing strategy: fifo
  Output queue 0/40, 8 drops; input queue 0/75, 66 drops
  5 minute input rate 316000 bits/sec, 79 packets/sec
  5 minute output rate 86000 bits/sec, 69 packets/sec
     38655938 packets input, 197198822 bytes, 45 no buffer
     Received 3949242 broadcasts, 0 runts, 0 giants
     97 input errors, 0 CRC, 0 frame, 0 overrun, 97 ignored, 0 abort
     0 input packets with dribble condition detected
     31511446 packets output, 2552774031 bytes, 0 underruns
     0 output errors, 207266 collisions, 1 interface resets
     0 babbles, 0 late collision, 206851 deferred
     0 lost carrier, 0 no carrier
     0 output buffer failures, 0 output buffers swapped out
 Serial0 is up, line protocol is up
  Hardware is MK5025
  Description: Telecom Frame Relay Line
  MTU 1500 bytes, BW 2048 Kbit, DLY 20000 usec, rely 255/255, load 59/255
  Encapsulation FRAME-RELAY, loopback not set, keepalive set (10 sec)
  LMI enq sent  99807, LMI stat recvd 99807, LMI upd recvd 0, DTE LMI up
  LMI enq recvd 0, LMI stat sent  0, LMI upd sent  0
  LMI DLCI 0  LMI type is ANSI Annex D  frame relay DTE
  Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 322799
  Last input 00:00:01, output 00:00:00, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0 (size/max/drops); Total output drops: 4821
  Queueing strategy: weighted fair
  Output queue: 0/64/4810 (size/threshold/drops)
     Conversations  0/16 (active/max active)
     Reserved Conversations 0/0 (allocated/max allocated)
  5 minute input rate 226000 bits/sec, 94 packets/sec
  5 minute output rate 474000 bits/sec, 109 packets/sec
     33253268 packets input, 3178040725 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants
     5 input errors, 4 CRC, 0 frame, 0 overrun, 1 ignored, 0 abort
     37649560 packets output, 552268820 bytes, 0 underruns
     0 output errors, 0 collisions, 477 interface resets
     0 output buffer failures, 0 output buffers swapped out
 Serial0.1 is up, line protocol is up
  Hardware is MK5025
  Description: Frame Relay PVC to Burwood
  Interface is unnumbered.  Using address of Ethernet0 (146.178.79.4)
  MTU 1500 bytes, BW 1024 Kbit, DLY 20000 usec, rely 255/255, load 59/255
  Encapsulation FRAME-RELAY
 Serial0.2 is up, line protocol is up
  Hardware is MK5025
  Description: Frame-relay PVC to Dandenong
  Interface is unnumbered.  Using address of Ethernet0 (146.178.79.4)
  MTU 1500 bytes, BW 512 Kbit, DLY 20000 usec, rely 255/255, load 59/255
  Encapsulation FRAME-RELAY
 Serial0.3 is up, line protocol is up
  Hardware is MK5025
  Description: Frame-relay PVC to Moorabbin
  Interface is unnumbered.  Using address of Ethernet0 (146.178.79.4)
  MTU 1500 bytes, BW 512 Kbit, DLY 20000 usec, rely 255/255, load 59/255
  Encapsulation FRAME-RELAY
 Serial0.4 is up, line protocol is up
  Hardware is MK5025
  Description: Frame relay PVC to Mornington
  Interface is unnumbered.  Using address of Ethernet0 (146.178.79.4)
  MTU 1500 bytes, BW 512 Kbit, DLY 20000 usec, rely 255/255, load 59/255
  Encapsulation FRAME-RELAY
 Serial0.5 is up, line protocol is up
  Hardware is MK5025
  Description: Frame Relay PVC to Keysborough
  Interface is unnumbered.  Using address of Ethernet0 (146.178.79.4)
  MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, rely 255/255, load 59/255
  Encapsulation FRAME-RELAY
 Serial0.6 is up, line protocol is up
  Hardware is MK5025
  Description: Frame Relay PVC to Doncaster
  Interface is unnumbered.  Using address of Ethernet0 (146.178.79.4)
  MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec, rely 255/255, load 59/255
  Encapsulation FRAME-RELAY
 Serial1 is administratively down, line protocol is down
  Hardware is MK5025
  MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255
  Encapsulation HDLC, loopback not set, keepalive set (10 sec)
  Last input never, output never, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0 (size/max/drops); Total output drops: 0
  Queueing strategy: weighted fair
  Output queue: 0/64/0 (size/threshold/drops)
     Conversations  0/0 (active/max active)
     Reserved Conversations 0/0 (allocated/max allocated)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     0 packets input, 0 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 collisions, 1 interface resets
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions

Current configuration:
!
version 11.1
service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname PIRD
!
!
!
interface Ethernet0
 ip address 146.178.74.8 255.255.255.0 secondary
 ip address 146.178.75.4 255.255.255.0 secondary
 ip address 146.178.79.4 255.255.255.0
 ip access-group 116 out
 no mop enabled
!
interface Serial0
 description Telecom Frame Relay Line
 no ip address
 encapsulation frame-relay
 bandwidth 2048
 frame-relay lmi-type ansi
!
interface Serial0.1 point-to-point
 description Frame Relay PVC to Burwood
 ip unnumbered Ethernet0
 bandwidth 1024
 frame-relay interface-dlci 16
!
interface Serial0.2 point-to-point
 description Frame-relay PVC to Dandenong
 ip unnumbered Ethernet0
 bandwidth 512
 frame-relay interface-dlci 17
!
interface Serial0.3 point-to-point
 description Frame-relay PVC to Moorabbin
 ip unnumbered Ethernet0
 bandwidth 512
 frame-relay interface-dlci 18
!
 interface Serial0.4 point-to-point
 description Frame relay PVC to Mornington
 ip unnumbered Ethernet0
 bandwidth 512
 frame-relay interface-dlci 19
!
interface Serial0.5 point-to-point
 description Frame Relay PVC to Keysborough
 ip unnumbered Ethernet0
 bandwidth 64
 frame-relay interface-dlci 20
!
interface Serial0.6 point-to-point
 description Frame Relay PVC to Doncaster
 ip unnumbered Ethernet0
 bandwidth 128
 frame-relay interface-dlci 21
!
interface Serial1
 no ip address
 shutdown
 lat enabled
 mop enabled

router igrp 178
 network 146.178.0.0
!
ip classless
logging trap debugging
logging facility local0
logging 146.178.74.13
access-list 114 permit udp host 146.178.24.13 any
access-list 114 deny   udp any host 146.178.79.255
access-list 114 permit tcp any any
access-list 114 permit udp any any
access-list 114 permit icmp any any
access-list 116 permit udp host 146.178.24.13 any
access-list 116 permit udp host 146.178.23.13 any
access-list 116 permit udp host 146.178.78.13 any
access-list 116 deny   udp any host 146.178.79.255
access-list 116 permit tcp any any
access-list 116 permit udp any any
access-list 116 permit icmp any any

Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-J-L), Version 11.1(8), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Thu 05-Dec-96 11:41 by tamb
Image text-base: 0x03038820, data-base: 0x00001000

ROM: System Bootstrap, Version 4.14(8), SOFTWARE

mora uptime is 1 week, 4 days, 8 hours, 38 minutes
System restarted by power-on
System image file is "igs-j-l_.bin", booted via flash

DECbrouter 90 router (68030) processor (revision A) with 6144K/2048K bytes of m
Processor board ID 00000000, with hardware revision 00000000
Bridging software.
SuperLAT software copyright 1990 by Meridian Technology Corp).
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
TN3270 Emulation software (copyright 1994 by TGV Inc).
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
System restarted by power-on
System image file is "igs-j-l_.bin", booted via flash

DECbrouter 90 router (68030) processor (revision A) with 6144K/2048K bytes of m
Processor board ID 00000000, with hardware revision 00000000
Bridging software.
SuperLAT software copyright 1990 by Meridian Technology Corp).
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
TN3270 Emulation software (copyright 1994 by TGV Inc).
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
1307.3IAMOSI::LEUNGWed May 28 1997 01:1410
Hi Neil,

Customer have now loaded Brouter V11.1(6) image onto the brouters but is still
seeing the same error messages, LINK-3-TOOBIG.
Should I IPMT it?


Cheers
Dennis