[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | DECbrouter-90T2,-T2A,-T1 |
| Notice: | Kits, DOCs, Release notes, SPDs notes 1-10 |
| Moderator: | FOUNDR::SHEEHAN |
|
| Created: | Wed Dec 23 1992 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 1313 |
| Total number of notes: | 4889 |
1270.0. "SNMP logging: disabled on Brouter 90T2" by EVTW1E::SYSTEM () Wed Feb 12 1997 10:32
I have a problem, using a Brouter 90T2 with SNMP enable (must be!).
Following the result of the command show SNMP:
LYOMRY#sho snmp
Chassis: 00000000
2053 SNMP packets input
0 Bad SNMP version errors
6 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
11962 Number of requested variables
0 Number of altered variables
0 Get-request PDUs
2047 Get-next PDUs
0 Set-request PDUs
2047 SNMP packets output
1 Too big errors (Maximum packet size 484)
0 No such name errors
0 Bad values errors
0 General errors
2047 Get-response PDUs
0 SNMP trap PDUs
--> SNMP logging: disabled ** My problem (must be enabled) **
End of show command.
Brouter 90T2 configuration:
--------------------------
using 712 out of 32762 bytes
!
version 10.2
!
hostname LYOMRY
!
enable secret 5 $1$78Pu$nWPwHTzWP7Wpudek5ungm1
enable password system
!
!
interface Ethernet0
ip address 123.17.17.3 255.255.255.0
lat enabled
bridge-group 1
!
interface Serial0
ip address 123.17.248.1 255.255.255.0
lat enabled
mop enabled
bridge-group 1
!
interface Serial1
ip address 123.17.249.1 255.255.255.0
lat enabled
mop enabled
bridge-group 1
!
router rip
network 123.17.0.0
!
snmp-server community public RW
snmp-server host 123.17.17.150 public snmp
!
lat service LCS_LYOMRY ident DECbrouter LYOMRY de Lyon Vill CHA00/AIX00
lat service LCS_LYOMRY enabled
bridge 1 protocol dec
!
line con 0
line vty 0 4
password system
login
!
end
End of configuration.
Tools used to monitor Brouters are : DECmcc 1.4 with UCX 4.0
UCX configuration:
------------------
UCX> sho service snmp/ful
Service: SNMP
State: Enabled
Port: 161 Protocol: UDP Address:
123.17.17.150
Inactivity: 5 User_name: UCX$SNMP Process:
UCX$SNMP
Limit: 1 Active: 1 Peak: 1
File: SYS$SYSDEVICE:[UCX$SNMP]UCX$SNMP_STARTUP.COM
end
End of configuration.
Tools used to monitor Brouters are : DECmcc 1.4 with UCX 4.0
UCX configuration:
-----------------
UCX> sho service snmp/ful
Service: SNMP
State: Enabled
Port: 161 Protocol: UDP Address:123.17.17.150
Inactivity: 5 User_name: UCX$SNMP Process:UCX$SNMP
Limit: 1 Active: 1 Peak: 1
File: SYS$SYSDEVICE:[UCX$SNMP]UCX$SNMP_STARTUP.COM
Flags: None
Socket Opts: Rcheck Scheck
Receive: 0 Send: 0
Log Opts: None
File: not defined
Security
Reject msg: not defined
Accept host: 0.0.0.0
Accept netw: 0.0.0.0
UCX>
Thanks for your help.
| T.R | Title | User | Personal
Name | Date | Lines
|
|---|