[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference irocz::terminal_servers

Title:Terminal Servers
Notice:See Note 2 for Directory of important notes. Please use keywords.
Moderator:LAVC::CAHILLON
Created:Tue May 14 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:3547
Total number of notes:12300

3544.0. "DS/700 + WNT + DIGITAL UNIX?" by TLAV01::PIPHOB () Sun Jun 01 1997 09:35

    Hello,
    
    We have DS/700 + WINDOWS NT 4.x + DIGITAL UNIX 3.2 G. We would like to
    have remote user under WNT. 
    
    Please tell us the fully step to do that.
    
    THANKS VERY MUCH.
    Piphob S.
T.RTitleUserPersonal
Name		DateLines
3544.1Brevity is a virtue -- up to a point.IROCZ::D_NELSONDave Nelson LKG1-3/A11 226-5358Mon Jun 02 1997 10:0810
RE: .0
    
>    We would like to have remote user under WNT. 

Could you please explain exactly what this means?

Regards,

Dave
3544.2WNT RAS & DS/700 ?TLAV01::PIPHOBMon Jun 02 1997 23:2013
    Hi,
    
    We have DS/700 and Modem connected. There are WNT & DIGITAL Unix. We
    would like to dial to UNIX and WNT. 
                                       
    We would like to do like a DIGITAL Board with WNT. On UNIX side, we
    just setup telnet and can go to unix side and do anythink under UNIX.
    
    Question : Under WNT side, We would like to connect drive from remote
    user. How to config RAS and DS/700?
    
    Thanks
    Piphob S.
3544.3W95 & WNT Clients - Standard PPP setupCSC32::R_BUCKAuthenticated and assimilatedThu Jun 05 1997 19:1520
    I *think* I understand the question.  For current versions of DNAS, a
    RAS connection is simply configured the same as any other PPP client. 
    Normally you will assign an IP address to the port.
    
    Specific to Windows NT is that you do not directly logon to a Windows
    NT domain.  All you can do is establish a PPP pipe and run TCP/IP over
    it.  By configuring a WINS server, or having an LMHOSTS file on the WNT
    client, you should be able to "Find" other systems once connected and
    then map any share that is being offered.
    
    Make sure the RAS settings for security is "Accept any authentication
    including clear text"  If you are using any sort of authentication at
    the PPP level, (Radius, Kerberos, SecurID, or Local), make sure that
    the Domain box on the WNT dial-up screen is blank.  WNT send a string
    of domain\Username if there is any value in the Domain box.  This
    will cause an authentication failure.  
    
    Hope this helps,
    Randall Buck
    MCS - Network Support
3544.4Any friendly doc?TLAV02::PIPHOBThu Jun 05 1997 21:238
    Hi,
    
    Do you have any friendly document that anybody can follow-up step by
    step?
    
    Thank very much,
    Piphob S.