[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference irocz::terminal_servers

Title:Terminal Servers
Notice:See Note 2 for Directory of important notes. Please use keywords.
Moderator:LAVC::CAHILLON
Created:Tue May 14 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:3547
Total number of notes:12300

3518.0. "modem without DSR" by HGOVC::SHUMCF () Fri May 02 1997 06:20

    We have proposed a rackmounted US Robtic modem pools for connecting to
    DECserver 90M, however, the port on this modem pool using RJ45 but
    without DSR signal, can it be worked with DS90M because there is only
    DSR and DTR. This modem pool has the following modem signal :
    
    RI, DCD, SIGND, RX, TX, CTS, RTS and DTR
    
    If it works with DS90M, please kindly advise what will be the cabling 
    pin configuration between DS90M and the modem port.
    
    Thanks in advance,
    cf
T.RTitleUserPersonal
Name		DateLines
3518.1Just a guess...IROCZ::D_NELSONDave Nelson LKG1-3/A11 226-5358Fri May 02 1997 11:0718
RE: .0
    
>    RI, DCD, SIGND, RX, TX, CTS, RTS and DTR

You have omitted the pinouts, so I can't specify any specific cables.  I'm
pretty sure this would have to be a custom cable.

You _might_ be able to get by using DCD on the modem connected to DSR on the
DECserver.  You'd have to test this to be certain, and it might invalidate
PTT certifications in certain countries.  No guarantees here.

With the signal set you describe, you might be better off using a DS700 or
DS900.

Regards,

Dave