[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference irocz::common_brouters

Title:	Digital Brouters Conference
Notice:	New common-code brouter family: RouteAbout, DECswitch 900
Moderator:	MARVIN::HARTLL

Created:	Mon Jul 17 1995
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	929
Total number of notes:	3736

881.0. "VNbus-connect" by BERN02::DEY (Walter Dey, Berne Switzerland) Wed Apr 30 1997 13:02

    VNbus-Autoconnect disabled
    on VNswitch-xx, we do "enable int 0" and connect to the VNbus
    
    q1: what happens if you take the module out of the DEChub and then
    	put it in again. Should it connect automatically to the VNbus
    	or do I have to do a "enable int 0" (resp. use MCM)
    
    q2: with VNbus-Autoconnect enable
    	do I connect to the VNbus that covers slot 1-4 resp. 5-8 ?

T.R Title User Personal
Name Date Lines

881.1 a1 & a2 FORBIN::WILKINSON Wed Apr 30 1997 17:29 11

T.R	Title	User	Personal Name	Date	Lines
881.1	a1 & a2	FORBIN::WILKINSON		`Wed Apr 30 1997 17:29`	11
	q1: If auto-connect is disabled, you can only connect the VNbus using MCM. If auto healing is enabled, the VNbus will re-connect on re-insertion. q2: With auto connect enabled, always connect to the full width VNbus. You may want to double check this in the hub_mgmt conference. But the effect is that all the modules can talk to one another -- there is no partitioning between slots 1-4 and 5-8. Hugh

    q1:  If auto-connect is disabled, you can only connect the VNbus
         using MCM.  If auto healing is enabled, the VNbus will
         re-connect on re-insertion.
    q2:  With auto connect enabled, always connect to the full width
         VNbus.  You may want to double check this in the hub_mgmt
         conference.  But the effect is that all the modules can
         talk to one another -- there is no partitioning between
         slots 1-4 and 5-8.
    
    Hugh