| Title: | Digital Brouters Conference |
| Notice: | New common-code brouter family: RouteAbout, DECswitch 900 |
| Moderator: | MARVIN::HART LL |
| Created: | Mon Jul 17 1995 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 929 |
| Total number of notes: | 3736 |
When viewing info via ISDN config>list all, what is use/meaning
of PS1 detect?
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 756.1 | found it! | CSC32::J_SHUMWAY | Thu Feb 13 1997 13:31 | 13 | |
question:
What does PS1 detect mean when viewing IDSN config> list all?
answer:
Per Network Interface Operations Guide AA-Ql2BD-TE,
Section 5.3.3 Optional ISDN Parameters.
If your ISDN switch supplies Power Source 1 (PS1), you should enable PS1 on
the interface. Enabling PS1 causes the interface to detect when the switch
shuts down and to clear all information about the last call before it
re-establishes the connection. Use the enable ps1 command. If your ISDN switch
does not supply PS1, you should disable PS1 on the interface. Use the disable
ps1 command.
| |||||
| 756.2 | EDWIN::TAC | Fri Feb 14 1997 11:32 | 6 | ||
Ouch...
Ignore it, it doesn't work. The router will always behave as if PS1 is
detected.
I'll see that the documentation gets updated.
| |||||