[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference turris::digital_unix

Title:DIGITAL UNIX(FORMERLY KNOWN AS DEC OSF/1)
Notice:Welcome to the Digital UNIX Conference
Moderator:SMURF::DENHAM
Created:Thu Mar 16 1995
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:10068
Total number of notes:35879

9542.0. "kernel build under 4.0b" by NNTPD::"[email protected]" (Steve Typhair) Thu Apr 17 1997 20:42

Hi

For some reason I'm running into a problem with a current install on a 
4100 system.  It continually fails on the kernel build after either a 
base or full subset install...?

I bring it up to multi-user mode with the original kernel and try a 
doconfig with the same results, it does mention ace_regbase is undefined.

Anyone else see this problem?

Cheers
Steve
 
[Posted by WWW Notes gateway]
T.RTitleUserPersonal
Name		DateLines
9542.1Re-run ECURHETT::PARKERFri Apr 18 1997 09:0214
    
    Hi, Steve. 
    
    I'm pretty sure you need to re-run the ECU in order to fix
    this. It's a little different on a 4100 too - I've got some
    specifics but I can't get to the notes right now - NFS server
    is down. 
    
    I'll try to place them here later...
    
    Hth,
    
    Lee
9542.2SMURF::PETERTrigidly defined areas of doubt and uncertaintyFri Apr 18 1997 09:3112
    You also want to make sure that ace is include in your config 
    file in /sys/conf/XXX  where XXX is the system name.  It should
    look like this:
    
    controller      ace0       at eisa0     slot  8 vector    aceintr 
    controller      ace1       at eisa0     slot  9 vector    aceintr 
    
    though I suppose things like slot numbers may vary.  We ran into
    this problem when setting up our rawhide.
    
    PeterT