[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | DIGITAL UNIX (FORMERLY KNOWN AS DEC OSF/1) |
| Notice: | Welcome to the Digital UNIX Conference |
| Moderator: | SMURF::DENHAM |
|
| Created: | Thu Mar 16 1995 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 10068 |
| Total number of notes: | 35879 |
9175.0. "AS2100A/3.2D/ERACOM/boot hang" by HGTIMA::CSCHAN () Fri Mar 14 1997 02:04
AS2100A system hangs during Bootup through series port in unix 3.2D.
However, It is fine if boot from the graphic port. It also boot fine
if booting genvmunix.
There was no such problem in V3.2B before the upgrade. And there has
no any hardware changing.
Field engineer found that if disable the ERACOM (encaptioned card)
through ECU, it can go through the boot up process.
Any hints?
C.S. Chan
P.S. The note has been crossed post in sable notes conference.
FYR
1. Console print out:
2: System HW configuration:
******************************************************************************
1: Console print out:
Dec 3 14:50:58 mash4 vmunix: PCXAL keyboard, language English (American)
Dec 3 14:50:58 mash4 vmunix:
Dec 3 14:50:58 mash4 vmunix: Alpha boot: available memory from 0x976000 to 0x7f
fe000
Dec 3 14:50:58 mash4 vmunix: Digital UNIX V3.2D-2 (Rev. 41.64); Tue Dec 3 14:4
9:22 HKT 1996
Dec 3 14:50:58 mash4 vmunix: physical memory = 128.00 megabytes.
Dec 3 14:50:58 mash4 vmunix: available memory = 118.53 megabytes.
Dec 3 14:50:58 mash4 vmunix: using 483 buffers containing 3.77 megabytes of mem
ory
Dec 3 14:50:58 mash4 vmunix: Firmware revision: 4.6
Dec 3 14:50:58 mash4 vmunix: PALcode: OSF version 1.45
Dec 3 14:50:58 mash4 vmunix: ibus0 at nexus
Dec 3 14:50:58 mash4 vmunix: AlphaServer 2100A 4/275
Dec 3 14:50:58 mash4 vmunix: cpu 0 EV-45 4mb b-cache
Dec 3 14:50:58 mash4 vmunix: gpc0 at ibus0
Dec 3 14:50:58 mash4 vmunix: pci0 at ibus0 slot 0
Dec 3 14:50:58 mash4 vmunix: eisa0 at pci0
Dec 3 14:50:58 mash4 vmunix: ace0 at eisa0
... Then system hung........
2: System HW configuration:
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Thu Mar 13 14:30:39 1997
OCCURRED ON SYSTEM hgcs12
SYSTEM ID x00020009 CPU TYPE: DEC 2100
SYSTYPE x00000000
MESSAGE PCXAL keyboard, language English
_(American)
Alpha boot: available memory from
_0x1492000 to 0x1fffe000
Digital UNIX V3.2D-2 (Rev. 41.64); Thu
_Mar 13 14:24:20 HKT 1997
physical memory = 512.00 megabytes.
available memory = 491.52 megabytes.
using 1958 buffers containing 15.29
_megabytes of memory
Firmware revision: 4.3
PALcode: OSF version 1.35
ibus0 at nexus
AlphaServer 2100 4/200
cpu 0 EV-4s 1mb b-cache
gpc0 at ibus0
pci0 at ibus0 slot 0
tu0: DECchip 21040-AA: Revision: 2.4
tu0 at pci0 slot 0
tu0: DEC TULIP Ethernet Interface,
_hardware address: 08-00-2B-E7-ED-A9
tu0: console mode: selecting UTP
_(10BaseT) port: no link
psiop0 at pci0 slot 1
Loading SIOP: script 1001100, reg
_81111000, data 408750c0
scsi0 at psiop0 slot 0
rz0 at scsi0 bus 0 target 0 lun 0 (DEC
_ RZ28M (C) DEC 0568)
rz1 at scsi0 bus 0 target 1 lun 0 (DEC
_ RZ28M (C) DEC 0568)
rz2 at scsi0 bus 0 target 2 lun 0 (DEC
_ RZ28M (C) DEC 0568)
rz6 at scsi0 bus 0 target 6 lun 0 (DEC
_ RRD43 (C) DEC 1084)
tz5 at scsi0 bus 0 target 5 lun 0 (DEC
_ TLZ6 (C)DEC 4BQE)
eisa0 at pci0
ace0 at eisa0
ace1 at eisa0
lp0 at eisa0
fdi0 at eisa0
fd0 at fdi0 unit 0
fta0 DEC CRE DEFEA FDDI Module,
_Hardware Revision 2
fta0 at eisa0
fta0: DMA Available.
fta0: DEC CRE DEFEA (PDQ) FDDI
_Interface, Hardware address:
_08-00-2B-B0-93-F1
fta0: Firmware rev: 2.3
vga0 at eisa0
1024x768 (QVision )
dns0 at eisa0
dns0: Digital WAN Device Driver
_Interface
dns1: Digital WAN Device Driver
_Interface
Initializing xcr0. Please wait.
Initializing xcr0. Please wait.
Initializing xcr0. Please wait.
Initializing xcr0. Please wait.
Initializing xcr0. Please wait.
xcr0 at eisa0
re0 at xcr0 unit 0 (unit status =
_OFFLINE, raid level = JBOD)
re1 at xcr0 unit 1 (unit status =
_OFFLINE, raid level = JBOD)
re2 at xcr0 unit 2 (unit status =
_OFFLINE, raid level = JBOD)
tu1: DECchip 21040-AA: Revision: 2.4
tu1 at pci0 slot 7
tu1: DEC TULIP Ethernet Interface,
_hardware address: 00-00-F8-21-93-10
tu1: console mode: selecting AUI
_(10Base5) port
pza0 at pci0 slot 8
pza0 firmware version: DEC P01 A10
_
scsi1 at pza0 slot 0
lvm0: configured.
lvm1: configured.
dli: configured
SuperLAT. Copyright 1993 Meridian
_Technology Corp. All rights
_reserved.
datalink: links=64, macs=6
knbinit: sessions=256, names=64
knbtcp: configured
knbtcpd: configured
knbadm configured
nbeadmin_configure
netbeuid_configure
netbeui_configure
x25_access: configured
x25_ip: configured
x25_relay: configured
x25_wls: configured
wandd_base: configured
wandd_llc2: configured
wandd_lapb: configured
wan_utilities: configured
ctf_base: configured
Node ID is 00-00-f8-21-93-10 (from
_device tu1)
dna_netman: configured
dna_dli: configured
| T.R | Title | User | Personal
Name | Date | Lines
|
|---|