[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | DIGITAL UNIX (FORMERLY KNOWN AS DEC OSF/1) |
| Notice: | Welcome to the Digital UNIX Conference |
| Moderator: | SMURF::DENHAM |
|
| Created: | Thu Mar 16 1995 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 10068 |
| Total number of notes: | 35879 |
Shutdown -r hangs during reboot when it jumps to the bootstrap code.
Any ideas?
AlphaServer 1000A 4/266
Firmware
SRM Console: V4.6-224
ARC Console: 4.49
PALcode: VMS PALcode V5.56-4, OSF PALcode X1.45-9
Serial Rom: V2.8
Processor
DECchip (tm) 21064A-2 266MHz
Memory
1024 Meg of System Memory
Bank 0 = 256 Mbytes(64 MB Per Simm) Starting at 0x00000000
Bank 1 = 256 Mbytes(64 MB Per Simm) Starting at 0x10000000
Bank 2 = 256 Mbytes(64 MB Per Simm) Starting at 0x20000000
Bank 3 = 256 Mbytes(64 MB Per Simm) Starting at 0x30000000
Slot Option Hose 0, Bus 0, PCI
7 Intel 82375EB Bridge to Bus 1, EISA
8 DECchip 21050-AA Bridge to Bus 2, PCI
11 DECchip 21040-AA ewa0.0.0.11.0 00-00-F8-22-2B-B3
13 DEC PCI FDDI fwa0.0.0.13.0 08-00-2B-B9-12-9B
Slot Option Hose 0, Bus 1, EISA
Slot Option Hose 0, Bus 2, PCI
0 QLogic ISP1020 pka0.7.0.2000.0 SCSI Bus ID 7
dka0.0.0.2000.0 RZ28M
dka100.1.0.2000.0 RZ28M
dka500.5.0.2000.0 RRD45
3 Mylex DAC960 dra.0.0.2003.0
dra0.0.0.2003.0 5 Member RAID 5
>>>sho me memory
1024 Meg of System Memory
Bank 0 = 256 Mbytes(64 MB Per Simm) Starting at 0x00000000
Bank 1 = 256 Mbytes(64 MB Per Simm) Starting at 0x10000000
Bank 2 = 256 Mbytes(64 MB Per Simm) Starting at 0x20000000
Bank 3 = 256 Mbytes(64 MB Per Simm) Starting at 0x30000000
>>>show *
auto_action HALT
boot_dev dka0.0.0.2000.0
boot_file
boot_osflags A
boot_reset ON
bootdef_dev dka0.0.0.2000.0
booted_dev
booted_file
booted_osflags
bus_probe_algorithm new
char_set 0
com1_baud 9600
com1_flow SOFTWARE
com1_modem OFF
com2_baud 9600
com2_flow SOFTWARE
com2_modem OFF
console serial
controlp ON
d_bell off
d_cleanup on
d_complete off
d_eop off
d_group field
d_harderr halt
d_loghard on
d_logsoft off
d_oper off
d_passes 1
d_quick off
d_report full
d_runtime 0
d_softerr halt
d_startup off
d_status off
d_trace off
dump_dev
enable_audit ON
era0_mode 0
ewa0_arp_tries 3
ewa0_bootp_file
ewa0_bootp_server
ewa0_bootp_tries 3
ewa0_def_ginetaddr 0.0.0.0
ewa0_def_inetaddr 0.0.0.0
ewa0_def_inetfile
ewa0_def_sinetaddr 0.0.0.0
ewa0_def_subnetmask 0.0.0.0
ewa0_ginetaddr 0.0.0.0
ewa0_inet_init bootp
ewa0_inetaddr 0.0.0.0
ewa0_inetfile
ewa0_loop_count 2
ewa0_loop_inc 1
ewa0_loop_patt ffffffff
ewa0_loop_size 10
ewa0_lp_msg_node 1
ewa0_mode Twisted-Pair
ewa0_protocols MOP
ewa0_sinetaddr 0.0.0.0
ewa0_tftp_tries 3
exdep_data 0
exdep_location 43
exdep_size 1
exdep_space eport:61
exdep_type 0
fwa0_arp_tries 3
fwa0_bootp_file
fwa0_bootp_server
fwa0_bootp_tries 3
fwa0_def_ginetaddr 0.0.0.0
fwa0_def_inetaddr 0.0.0.0
fwa0_def_inetfile
fwa0_def_sinetaddr 0.0.0.0
fwa0_def_subnetmask 0.0.0.0
fwa0_ginetaddr 0.0.0.0
fwa0_inet_init bootp
fwa0_inetaddr 0.0.0.0
fwa0_inetfile
fwa0_loop_count 3e8
fwa0_loop_inc a
fwa0_loop_patt ffffffff
fwa0_loop_size 2e
fwa0_lp_msg_node 1
fwa0_protocols MOP
fwa0_sinetaddr 0.0.0.0
fwa0_tftp_tries 3
i 000007c1
kbd_hardware_type PCXAL
language 36
language_name English(American)
license MU
netdev ewa0
os_type UNIX
pal VMS PALcode V5.56-4, OSF PALcode X1.45-9
pci_parity off
pka0_host_id 7
pka0_soft_term on
rcm_answer
rcm_dialout
rcm_init
scsi_poll ON
sys_serial_num
tga_sync_green 8
tt_allow_login 1
tty_dev 0
version V4.6-224 Aug 15 1996 11:08:12
>>>sho dev
dka0.0.0.2000.0 DKA0 RZ28M 0568
dka100.1.0.2000.0 DKA100 RZ28M 0616
dka500.5.0.2000.0 DKA500 RRD45 1645
dra0.0.0.2003.0 DRA0 5 Member RAID 5
dva0.0.0.1000.0 DVA0
ewa0.0.0.11.0 EWA0 00-00-F8-22-2B-B3
fwa0.0.0.13.0 FWA0 08-00-2B-B9-12-9B
pka0.7.0.2000.0 PKA0 SCSI Bus ID 7 2.10
>>>
>>>
>>>
>>>
**********************************
Unauthorized Access is PROHIBITED.
**********************************
Digital UNIX Version V4.0 (hokum.phs.com) console
login: rootPassword:
Last login: Thu Feb 13 20:32:29 on console
Digital UNIX V4.0A (Rev. 464); Wed Feb 5 14:46:10 PST 1997
The installation software has successfully installed your system.
There are logfiles that contain a record of your installation.
These are:
/var/adm/smlogs/install.cdf - configuration description file
/var/adm/smlogs/install.log - general log file
/var/adm/smlogs/install.FS.log - file system creation logs
/var/adm/smlogs/setld.log - log for the setld(8) utility
/var/adm/smlogs/fverify.log - verification log file
[ROOT-Hokum]/usr/root>dfFilesystem 1024-blocks Used Available
Capacity Mounted on
root_domain#root 81920 51745 24440 68% /
usr_domain#usr 1449032 1019498 411352 72% /usr
opt_domain#opt 8220672 1029231 6251592 15% /opt
/proc 0 0 0 100% /proc
[ROOT-Hokum]/usr/root>shutdown -r nowShutdown at 20:49 (in 0 minutes) [pid
514]
*** FINAL System shutdown message from [email protected] ***
System going down IMMEDIATELY
...
System shutdown time has arrived
[ROOT-Hokum]/usr/root>syncing disks... done
rebooting.... (transferring to monitor)
CP - SAVE_TERM routine to be called
CP - SAVE_TERM exited with hlt_req = 1, r0 = 00000000.00000000
halted CPU 0
halt code = 5
HALT instruction executed
PC = fffffc00004470a0
CPU 0 booting
(boot dka0.0.0.2000.0 -flags A)
block 0 of dka0.0.0.2000.0 is a valid boot block
reading 32 blocks from dka0.0.0.2000.0
bootstrap code read in
base = 1ce000, image_start = 0, image_bytes = 4000
initializing HWRPB at 2000
initializing page table at 1c0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
^
|_____________ Box hangs here. Power cycle or depressing the
reset switch, frees the hang condition by
performing an init on the machine.
ff.fe.fd.fc.fb.fa.f9.f8.f7.f6.f5.ef.df.ee.f4.
probing hose 0, PCI
probing PCI-to-EISA bridge, bus 1
probing PCI-to-PCI bridge, bus 2
bus 2, slot 0 -- pka -- QLogic ISP1020
bus 2, slot 3 -- dra -- Mylex DAC960
bus 0, slot 11 -- ewa -- DECchip 21040-AA
bus 0, slot 13 -- fwa -- DEC PCI FDDI
ed.ec.eb.....ea.e9.e8.e7.e6.e5.e4.e3.e2.e1.e0.
V4.6-224, built on Aug 15 1996 at 11:08:12
>>>
>>>b
(boot dka0.0.0.2000.0 -flags A)
block 0 of dka0.0.0.2000.0 is a valid boot block
reading 32 blocks from dka0.0.0.2000.0
bootstrap code read in
base = 1ce000, image_start = 0, image_bytes = 4000
initializing HWRPB at 2000
initializing page table at 1c0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Digital UNIX boot - Mon Aug 19 21:02:26 EDT 1996
Loading vmunix ...
Loading at fffffc0000230000
Current PAL Revision <0x1000400010538>
Switching to OSF PALcode Succeeded
New PAL Revision <0x100090002012d>
Sizes:
text = 3301728
data = 488688
bss = 682880
Starting at 0xfffffc0000445640
Alpha boot: available memory from 0x16f4000 to 0x3fffe000
Digital UNIX V4.0A (Rev. 464); Wed Feb 5 14:46:10 PST 1997
physical memory = 1024.00 megabytes.
available memory = 1001.20 megabytes.
using 3925 buffers containing 30.66 megabytes of memory
AlphaServer 1000A 4/266
Firmware revision: 4.6
PALcode: OSF version 1.45
pci0 at nexus
eisa0 at pci0
ace0 at eisa0
ace1 at eisa0
lp0 at eisa0
fdi0 at eisa0
fd0 at fdi0 unit 0
cirrus0 at eisa0
cirrus0: Cirrus Logic CL-GD5428 (SVGA) 512 Kbytes
pci2000 at pci0 slot 8
isp0 at pci2000 slot 0
isp0: QLOGIC ISP1020A
isp0: Firmware revision 2.10 (loaded by console)
scsi0 at isp0 slot 0
rz0 at scsi0 target 0 lun 0 (LID=0) (DEC RZ28M (C) DEC 0568) (Wide16)
rz1 at scsi0 target 1 lun 0 (LID=1) (DEC RZ28M (C) DEC 0616)
rz5 at scsi0 target 5 lun 0 (LID=2) (DEC RRD45 (C) DEC 1645)
Initializing xcr0. Please wait....
xcr0 at pci2000 slot 3
re0 at xcr0 unit 0 (unit status = ONLINE, raid level = 5)
tu0: DECchip 21040-AA: Revision: 2.4
tu0 at pci0 slot 11
tu0: DEC TULIP Ethernet Interface, hardware address: 00-00-F8-22-2B-B3
tu0: console mode: selecting 10BaseT (UTP) port: half duplex: no link
fta0 DEC DEFPA FDDI Module, Hardware Revision 0
fta0 at pci0 slot 13
fta0: DMA Available.
fta0: DEC DEFPA (PDQ) FDDI Interface, Hardware address: 08-00-2B-B9-12-9B
fta0: Firmware rev: 2.46
gpc0 at eisa0
kernel console: ace0
dli: configured
ADVFS: using 9345 buffers containing 73.00 megabytes of memory
vm_swap_init: warning /sbin/swapdefault swap device not found
vm_swap_init: swap is set to lazy (over commitment) mode
starting LSM
/sbin/vol-reconfig: /tmp/sh220: cannot create
Checking local filesystems
/sbin/ufs_fsck -p
Mounting / (root)
user_cfg_pt: reconfigured
Mounting local filesystems
exec: /sbin/mount_advfs -F 81920 root_domain#root /
root_domain#root on / type advfs (rw)
exec: /sbin/mount_advfs -F 16384 usr_domain#usr /usr
usr_domain#usr on /usr type advfs (rw)
exec: /sbin/mount_advfs -F 16384 opt_domain#opt /opt
opt_domain#opt on /opt type advfs (rw)
/proc on /proc type procfs (rw)
Feb 13 21:00:15 update: started
The system is coming up. Please wait...
Checking for crash dumps
Initializing paging space
swapon: added /dev/rz0b as swap device.
Mounting Memory filesystems
Streams autopushes configured
Configuring network
hostname: hokum.phs.com
fta0: Link Unavailable.
Loading LMF licenses
fta0: Link Available.
System error logger started
Binary error logger started
add net default: gateway 149.111.61.1
rwho daemon started
Setting kernel timezone variable
Setting the current time and date with ntpdate
Thu Feb 13 21:00:25 PST 1997
Ntpdate succeeded.
ONC portmap service started
NFS IO service started
Mounting NFS filesystems
Preserving editor files
security configuration set to default (BASE).
Successful SIA initialization
Clearing temporary files
Unlocking ptys
4 aliases, longest (root) 29 bytes, 82 bytes total
SMTP Mail Service started
Network Time Service started
Extensible SNMP master agent started
Base O/S sub-agent started
Using snmp service entry port 161.
Internet services provided.
Cron service started
LSM vold not started
! *** cron started *** pid = 444 Thu Feb 13 21:00:30 1997
Printer service started
The system is ready.
**********************************
Unauthorized Access is PROHIBITED.
**********************************
Digital UNIX Version V4.0 (hokum.phs.com) console
login:
******************************************************************************
Starting Desktop Login on display :0...** Wait for the Desktop Login screen
before logging
in.***************************************************************************
**
**********************************
Unauthorized Access is PROHIBITED.
**********************************
Digital UNIX Version V4.0 (hokum.phs.com) console
login: rootPassword:
Last login: Thu Feb 13 20:49:32 on console
Digital UNIX V4.0A (Rev. 464); Wed Feb 5 14:46:10 PST 1997
The installation software has successfully installed your system.
There are logfiles that contain a record of your installation.
These are:
/var/adm/smlogs/install.cdf - configuration description file
/var/adm/smlogs/install.log - general log file
/var/adm/smlogs/install.FS.log - file system creation logs
/var/adm/smlogs/setld.log - log for the setld(8) utility
/var/adm/smlogs/fverify.log - verification log file
********* NOTE, Customer can issue an shutdown -h and system *********
********* will shutdown without an incident. *********
[ROOT-Hokum]/usr/root>shutdown -h nowShutdown at 21:01 (in 0 minutes) [pid
513]
*** FINAL System shutdown message from [email protected] ***
System going down IMMEDIATELY
...
System shutdown time has arrived
[ROOT-Hokum]/usr/root>syncing disks... done
CPU 0: Halting... (transferring to monitor)
CP - SAVE_TERM routine to be called
CP - SAVE_TERM exited with hlt_req = 1, r0 = 00000000.00000000
halted CPU 0
halt code = 5
HALT instruction executed
PC = fffffc00004470a0
>>>
[Posted by WWW Notes gateway]
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 8932.1 | | COL01::LINNARTZ | | Mon Feb 24 1997 14:56 | 6 |
| even the halting point looks strange, have you tried it with setting
autoaction to BOOT.
I would also take a look at wrksys::mikasa if this is a know'n
feature in the firmware rev you're using.
Pity
|
| 8932.2 | yup | NETRIX::"[email protected]" | Brian | Tue Feb 25 1997 12:05 | 5 |
| It acts the same with autoaction = boot. I can't
find any recent documented issue like this one.
Thanks for the reply
[Posted by WWW Notes gateway]
|