Conference turris::digital_unix

8667.0. "Can�t build genvmunix after upgrade from DUNIX 32C to 32G" by NETRIX::"[email protected]" (Farah Salem) Fri Jan 31 1997 07:32

Hi,

I've made a DUNIX upgrade 32C -> 32G on AlphaServer 2100 (Sable).
I can successfully build a new vmunix.
Trying to build the generic kernel I get the  following Error Messages:

*** WARNING ***
An error has occurred during system configuration.  A partial listing
of the error log file (./errs) follows:

faa_interrupt_level_lockinfo
faa_adapter_states
faa_halt_reasons
faa_comp_status
faa_unsol_station_events
faa_unsol_link_events
faa_unsol_phy_events
volspec.o compressed: branch relocation out-of-range, bad object file
produced,
can't branch from 0xfffffc00006f8ba4 to 0xfffffc00002dc08c
volspec.o compressed: branch relocation out-of-range, bad object file
produced,
can't branch from 0xfffffc00006f8e88 to 0xfffffc00002dbffc
vol.o compressed: branch relocation out-of-range, bad object file produced,
can'
t branch from 0xfffffc00007046c8 to 0xfffffc00002dd99c
vol.o compressed: branch relocation out-of-range, bad object file produced,
can'
t branch from 0xfffffc000070482c to 0xfffffc00002da91c
vol.o compressed: branch relocation out-of-range, bad object file produced,
can'
t branch from 0xfffffc0000704830 to 0xfffffc00002daf4c
volblog.o compressed: branch relocation out-of-range, bad object file
produced,
can't branch from 0xfffffc000070533c to 0xfffffc00002dd99c
volblog.o compressed: branch relocation out-of-range, bad object file
produced,
can't branch from 0xfffffc000070543c to 0xfffffc00002da91c
volblog.o compressed: branch relocation out-of-range, bad object file
produced,
can't branch from 0xfffffc0000705440 to 0xfffffc00002daf4c
*** Exit 1 (ignored)
chmod 755 a.out
chmod: a.out: No such file or directory
*** Exit 4
Stop.




I�ve de- and reinstalled OSFBINCOM350, OSFBINCOM375, OSFLSMBINCOM350 and
OSFLSMBINCOM375

The Problem remain the same.
Any Suggestions



Thanks

Farah 

[Posted by WWW Notes gateway]

Was there a problem with the genvmunix on the V3.2G kit?


	-- Farrell

[Posted by WWW Notes gateway]

I believe (hope) the genvmunix in the 32G kit is OK.

I just want to be sure, that I can build the genvmunix on demand.
Is this not an indication for a  correct  UNIX installation?


Farah

[Posted by WWW Notes gateway]

I believe (hope) the genvmunix in the 32G kit is OK.

I just want to be sure, that I can build the genvmunix on demand.
Is this not an indication for a  correct  UNIX installation?


Farah

[Posted by WWW Notes gateway]