| Title: | DIGITAL UNIX (FORMERLY KNOWN AS DEC OSF/1) |
| Notice: | Welcome to the Digital UNIX Conference |
| Moderator: | SMURF::DENHAM |
| Created: | Thu Mar 16 1995 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 10068 |
| Total number of notes: | 35879 |
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 8512.1 | More info | NETRIX::"[email protected]" | mark | Sun Jan 26 1997 00:03 | 17 |
Please post or email the type of system the physical memory the onconfig
anything else thats using shared memory
the /sys/conf/HOSTNAME file /etc/sysconfigtab and just to be sure
the output of :-
#!/bin/ksh
echo "###############################################################"
echo "#$(/bin/date +"%Y:%m:%d:%T")#on host# $(/usr/bin/uname -a)#"
echo "#"
for i in $( sysconfig -s | cut -d: -f1 )
do
sysconfig -q $i | awk '{
if ( $0 ~ ":" ) print $0
else printf "\t%s\n", $0 }'
done
[Posted by WWW Notes gateway]
| |||||
| 8512.2 | Informix Problem? | TMCUKA::ROWELL | Paul Rowell @BBP | Mon Jan 27 1997 05:36 | 5 |
Please keep us informed about the progress of this - I think I have
seen this in the benchmark I was running last week.
-Paul
| |||||
| 8512.3 | news about problem.... | NETRIX::"[email protected]" | Albertino | Thu Jan 30 1997 09:02 | 229 |
Hi,
There is some info about the config :
=========================================================================ENT
CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Fri Jan 17 09:28:01 1997
OCCURRED ON SYSTEM centaur
SYSTEM ID x00060009 CPU TYPE: DEC 2100
SYSTYPE x00000000
MESSAGE Alpha boot: available memory from
_0xa50000 to 0xfffe000
Digital UNIX V4.0A (Rev. 464);
Wed
_Dec 18 16:39:25 MET 1996
physical memory = 256.00
megabytes.
available memory = 245.67
megabytes.
using 975 buffers containing 7.61
_megabytes of memory
Firmware revision: 4.6
PALcode: OSF version 1.45
ibus0 at nexus
AlphaServer 2000 4/233
cpu 0 EV-45 1mb b-cache
gpc0 at ibus0
pci0 at ibus0 slot 0
psiop0 at pci0 slot 1
Loading SIOP: script 1001000, reg
_81000000, data 405baf38
scsi0 at psiop0 slot 0
rz0 at scsi0 target 0 lun 0
(LID=0)
_(DEC RZ28M (C) DEC 0568)
_(Wide16)
rz1 at scsi0 target 1 lun 0
(LID=1)
_(DEC RZ28M (C) DEC 0568)
rz2 at scsi0 target 2 lun 0
(LID=2)
_(DEC RZ28M (C) DEC 0568)
rz3 at scsi0 target 3 lun 0
(LID=3)
_(DEC RZ29B (C) DEC 0014)
tz5 at scsi0 target 5 lun 0
(LID=4)
_(DEC TLZ09 (C)DEC 0167)
rz6 at scsi0 target 6 lun 0
(LID=5)
_(DEC RRD45 (C) DEC 1645)
eisa0 at pci0
ace0 at eisa0
ace1 at eisa0
lp0 at eisa0
fdi0 at eisa0
fd0 at fdi0 unit 0
qvision0 at eisa0
qvision0: CMPQ Qvision 1024/E
SVGA
tra0 at eisa0
tra0: DEC DW300 Token Ring
Interface,
_Hardware address:
00-00-93-58-AD-AB
tra0: TMS380 Microcode Type: CAF,
_Silicon Rev: 2.0, Microcode
Level:
_2.28
tu0: DECchip 21040-AA: Revision:
2.3
tu0 at pci0 slot 6
tu0: DEC TULIP Ethernet
Interface,
_hardware address:
08-00-2B-E6-92-3B
tu0: console mode: selecting
10BaseT
_(UTP) port: half duplex
kernel console: qvision0
dli: configured
=========================================================================
dlb:
kinfo:
kinfo_streams = 10
strstd:
ldtty:
pts:
nptys = 255
ufs:
inode-hash-size = 512
create-fastlinks = 1
ufs-blkpref-lookbehind = 8
nmount = 128
vfs:
name-cache-size = 1029
name-cache-hash-size = 256
buffer-hash-size = 512
special-vnode-alias-tbl-size = 64
bufcache = 3
path-num-max = 64
sys-v-mode = 0
ucred-max = 256
nvnode = 468
max-vnodes = 10000
min-free-vnodes = 468
vnode-age = 120
namei-cache-valid-time = 1200
max-free-file-structures = 0
max-ufs-mounts = 1000
vnode-deallocation-enable = 1
pipe-maxbuf-size = 65536
pipe-single-write-max = -1
pipe-databuf-size = 8192
pipe-max-bytes-all-pipes = 81920000
noadd-exec-access = 0
vm:
ubc-minpercent = 10
ubc-maxpercent = 100
ubc-borrowpercent = 20
ubc-maxdirtywrites = 5
ubc-nfsloopback = 0
vm-max-wrpgio-kluster = 32768
vm-max-rdpgio-kluster = 16384
vm-cowfaults = 4
vm-mapentries = 200
vm-maxvas = 17179869184
vm-maxwire = 16777216
vm-heappercent = 60
vm-vpagemax = 16384
vm-segmentation = 1
vm-ubcpagesteal = 24
vm-ubcdirtypercent = 10
vm-ubcseqstartpercent = 50
vm-ubcseqpercent = 10
vm-csubmapsize = 1048576
vm-ubcbuffers = 256
vm-syncswapbuffers = 128
vm-asyncswapbuffers = 4
vm-clustermap = 1048576
vm-clustersize = 65536
vm-zone_size = 0
vm-kentry_zone_size = 16777216
vm-syswiredpercent = 80
vm-inswappedmin = 1
vm-page-free-target = 128
vm-page-free-min = 20
vm-page-free-reserved = 10
vm-page-free-optimal = 74
vm-page-prewrite-target = 256
dump-user-pte-pages = 0
kernel-stack-guard-pages = 1
vm-min-kernel-address = 18446744071562067968
contig-malloc-percent = 20
vm-aggressive-swap = 0
new-wire-method = 1
vm-segment-cache-max = 50
vm-page-lock-count = 0
gh-chunks = 0
gh-min-seg-size = 8388608
gh-fail-if-no-mem = 1
cma_dd:
CMA_Option = attribute does not allow this operation
hw_database_debug = 0
cam_disk:
initialized = 1
max_spinups_per_bus = 2
pwrmgmt_poll_period = 30
cam_tape:
initialized = 1
cam:
cam_initialized_flag = 1
cam_printdb_flag = 0
cam_param_1 = 1
number_of_SCSI_buses = 0
num_peripheral_drivers = 2
num_old_peripheral_drivers = 0
eisa:
Module_Config_Name = attribute does not allow this operation
Module_Type = attribute does not allow this operation
EISA_Option = attribute does not allow this operation
EISA_Developer_Debug = 0
Adapt_Config = 0
Confl1 = 0
pci:
Module_Config_Name = attribute does not allow this operation
Module_Type = attribute does not allow this operation
PCI_Option = attribute does not allow this operation
PCI_Developer_Debug = 0
Adapt_Config = 0
Confl1 = 0
ws:
ws_graphics_flag = attribute does not allow this operation
vga:
PCI_Option = attribute does not allow this operation
ISA_Option = attribute does not allow this operation
EISA_Option = attribute does not allow this operation
qvision:
PCI_Option = attribute does not allow this operation
ISA_Option = attribute does not allow this operation
EISA_Option = attribute does not allow this operation
ddr:
subsystem error: Function not implemented
kds:
kds_version = 1
kds_inited = 3
kds_print_flag = 0
kds_num_db = 4
kds_corrupt = 0
kds_bio_read = 2
kds_kio_read = 0
kds_kio_write = 2
lat:
I will post you the config file later
Albertino
[Posted by WWW Notes gateway]
| |||||
| 8512.4 | Solved | EVTAI1::SAMIE_F | francoise [email protected] | Mon Feb 03 1997 04:52 | 19 |
This problem concerns Informix OnLine 7.20.UC4 under D Unix 4.0A and doesn't happen when kernel asynchronous i/o are used Detailed solution onmode -ky # stop instance enlarge rt parameters in sysconfigtab aio-max-num=4096 aio-max-percent=5 or 10 reboot the system unset KAIOOFF # remove from environment oninit # start instance Francoise | |||||