| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 7819.1 | (not a response to .0, but inspired by it) | LGP30::FLEISCHER | without vision the people perish (DTN 381-0426 ZKO1-1) | Tue Nov 12 1996 15:05 | 12 |
| 7819.2 | | NABETH::alan | Dr. File System's Home for Wayward Inodes. | Tue Nov 12 1996 15:25 | 8 |
| 7819.3 | Could it be sysinfo? | SWAM1::POIANI_MI | | Tue Nov 12 1996 16:10 | 9 |
| 7819.4 | now perhaps newfs is pulling my leg... | LGP30::FLEISCHER | without vision the people perish (DTN 381-0426 ZKO1-1) | Tue Nov 12 1996 19:39 | 18 |
| 7819.5 | calc for cyl bounds | PRMS00::COLE | | Wed Nov 13 1996 07:01 | 6 |
| 7819.6 | Interface needs improvement | GREGOR::OPP | | Wed Nov 13 1996 07:28 | 20 |
| 7819.7 | Why is the sec/cyl value wrong? | IOSG::MARSHALL | | Wed Nov 13 1996 07:47 | 17 |
| 7819.8 | | UNXA::PARKER | | Wed Nov 13 1996 09:47 | 16 |
| 7819.9 | | UNXA::PARKER | | Wed Nov 13 1996 09:50 | 9 |
| 7819.10 | "How To Minimize # Of Sectors Unallocated On A Filesystem" | LGP30::FLEISCHER | without vision the people perish (DTN 381-0426 ZKO1-1) | Wed Nov 13 1996 10:02 | 83 |
| 7819.11 | cylinder boundary != cylinder group boundary | SMURF::KNIGHT | Fred Knight | Wed Nov 13 1996 13:49 | 27 |
| 7819.12 | OK, "glumps" | LGP30::FLEISCHER | without vision the people perish (DTN 381-0426 ZKO1-1) | Wed Nov 13 1996 15:37 | 16 |
| 7819.13 | GUI looses partition changes after commit | HYDRA::DONSBACH | Jeff Donsbach, Software Partner Engineering, DTN 297-6862 | Wed Nov 13 1996 20:29 | 9 |
| 7819.14 | | SSDEVO::ROLLOW | Dr. File System's Home for Wayward Inodes. | Thu Nov 14 1996 00:47 | 19 |
| 7819.15 | | IOSG::MARSHALL | | Thu Nov 14 1996 06:11 | 15 |
| 7819.16 | ? How to enter internal Digital UNIX QAR? | GREGOR::OPP | | Thu Nov 14 1996 07:18 | 8 |
| 7819.17 | | UNXA::PARKER | | Thu Nov 14 1996 07:22 | 9 |
| 7819.18 | | KITCHE::schott | Eric R. Schott USG Product Management | Thu Nov 14 1996 09:18 | 8 |
| 7819.19 | O.K. no duplicate QARs | GREGOR::OPP | | Thu Nov 14 1996 12:48 | 9 |
| 7819.20 | | UNXA::PARKER | | Thu Nov 14 1996 13:33 | 6 |
| 7819.21 | What type of steel? ;-) | GREGOR::OPP | | Fri Nov 15 1996 08:07 | 4 |
| 7819.22 | | KITCHE::schott | Eric R. Schott USG Product Management | Fri Nov 15 1996 10:10 | 2 |
| 7819.23 | 4.0x partition tool | USPS::FPRUSS | Frank Pruss, 202-232-7347 | Wed Apr 09 1997 22:01 | 26 |
| Well, just started my first clean DIGITAL UNIX install on my DEC 3000
M500 in two years, using 4.0b.
I see you have been busy!
So far trying to repartiion my disk has been the only place that I got
held up. I found I had to set all partitions to filesystem "unused",
"commit", then "close". Then start over, leaving filesystem "unused",
set all the sizes I wanted, "commit" and "close".
Then, if I revisited partiion disks, the tool shows only my A partion
(right size). Using the "Partition Table" button showed the other
partitions as I had specified.
Loading is in progress. Except for this glitch, so far I'd say great
stuff!
I really hope that when this tool is used for a "fresh install" it can
be changed to _never_ complain that it can't newfs a partition.
I'd also like to see it automgically sdjust the "following" partition's
start block when you enter a "too large" size for a partition.
But, when I got past the hiccups, gotta love it!
FJP
|