| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 3765.1 | Can be improved | STOWKS::SLUIS | Hans van Sluis - StorageWorks Engineering Support Europe- DTN 889 9526 | Mon May 26 1997 15:40 | 18 |
| Patrick,
This will work, but you'll get errors .
Change the config into the following :
HSJ50 <-- BN21H-02 --> BA350 with DWZZA-VA <-- BN36B-0B -->
<-- BN21K-xx --> TL894 port 1,2
HSJ50 <-- BN21H-02 --< BA350 with DWZZA-VA <-- BN36B-0B -->
<-- BN21K-xx --> TL894 port 3,4
Also take a look to entry 2988.*
Keep in mind that the TL894 has 4 TZ89-drives, with 5 MB/sec
per drive. So 20 MB/sec per TL894. Can your CI deliver this ?
Hans
|
| 3765.2 | What is the full configuration? | SSDEVO::MARTENS | Bert Martens, CXO Storage Solutions | Tue May 27 1997 23:00 | 12 |
| Did I miss somthing? Are you planning on connecting the Tape library
to more than one controller shelf? Where does that second cable
connect?
If you try and connect the tape library between "2" sets of
controllers, you will get a SCSI ID conflict.
Please indicate what the botton cable is connected to.
Regards,
Bert
|
| 3765.3 | Yes, 2 controller pairs | STOWKS::SLUIS | Hans van Sluis - StorageWorks Engineering Support Europe- DTN 889 9526 | Fri May 30 1997 09:40 | 7 |
| Bert,
Yes, I'm proposing to use 2 controller pairs to drive the TL894.
Of course there will be no connection between those 2 pairs (except from
the CI-interface).
Hans
|