| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 2456.1 | go to 1.5 hsof code | SSDEVO::PHERSON | | Thu Oct 13 1994 21:01 | 12 |
| 2456.2 | 1.5 on the way! | NCMAIL::NAGYP | Do more with less,faster.... | Fri Oct 14 1994 05:03 | 7 |
| 2456.3 | tz877 how to rev firmware ck on unix | KYOSS1::LUIZZA | | Wed Mar 12 1997 20:05 | 18 |
|
I have a customer tz877 that has had the tz87-ax replaced 3 times that
I know of. I'm guessing that the new units have been coming in with the
latest firmware but can't tell how to find out what actually it is in
the unit. It is on a A8400 system off the KTFIA port and I'm not able
to get DEC unix system down often. Any way from software to be able to
tell what rev the loader is at?
The last unit tz87-ax was swapped out because it ripped the leader out
of a cart and swallowed it into the tz87-ax. it would not come out of a
loading condition even after multiple resets.
While I'm in here is there any recomended cleaning on the cart loader
assy rollers/gears ect? just figured that after time something must get
worn or slick on the front loader section of the unit.
/Irv
|
| 2456.4 | | NABETH::alan | Dr. File System's Home for Wayward Inodes. | Wed Mar 12 1997 22:00 | 68 |
| # scu -f special-file show device
where special-file is the name of the special file corresponding
to the tape or medium changer. On some versions you may need
to feed scu(8) the bus, target and LUN number instead of using
-f.
Using my TZ885 as example:
# scu -f /dev/rmt3h show device
Inquiry Information:
SCSI Bus ID: 2
SCSI Target ID: 3
SCSI Target LUN: 0
Peripheral Device Type: 0x1 (Sequential Access)
Peripheral Qualifier: 0 (Peripheral Device Connected)
Device Type Modifier: 0
Removable Media: Yes
ANSI Version: 2 (Complies to ANSI X3.131-1994, SCSI-2)
ECMA Version: 0
ISO Version: 0
Response Data Format: 2 (SCSI-2)
Terminate I/O Process: 0
Asynchronous Notification: 0
Additional Length: 51
Soft Reset Support: No
Command Queuing Support: No
Target Transfer Disable: No
Linked Command Support: Yes
Synchronous Data Transfers: Yes
Support for 16 Bit Transfers: No
Support for 32 Bit Transfers: No
Relative Addressing Support: No
Vendor Identification: DEC
Product Identification: TZ885 (C) DEC
Firmware Revision Level: CC1E
# scu -f /dev/mc19b show device
Inquiry Information:
SCSI Bus ID: 2
SCSI Target ID: 3
SCSI Target LUN: 1
Peripheral Device Type: 0x8 (Changer)
Peripheral Qualifier: 0 (Peripheral Device Connected)
Device Type Modifier: 0
Removable Media: Yes
ANSI Version: 2 (Complies to ANSI X3.131-1994, SCSI-2)
ECMA Version: 0
ISO Version: 0
Response Data Format: 2 (SCSI-2)
Terminate I/O Process: 0
Asynchronous Notification: 0
Additional Length: 51
Soft Reset Support: No
Command Queuing Support: No
Target Transfer Disable: No
Linked Command Support: Yes
Synchronous Data Transfers: Yes
Support for 16 Bit Transfers: No
Support for 32 Bit Transfers: No
Relative Addressing Support: No
Vendor Identification: DEC
Product Identification: TZ Media Changer
Firmware Revision Level: CC1E
|
| 2456.5 | Thanks for answer # one on to the others... | KYOSS1::LUIZZA | | Thu Mar 13 1997 00:38 | 7 |
|
Thanks for the reply on how to find out what it is. If someone would
like to add on some replies to the other questions in my note I would
appreciate it also.
/Irv
|