[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference ssag::ask_ssag

Title:Ask the Storage Architecture Group
Notice:Check out our web page at http://www-starch.shr.dec.com
Moderator:SSAG::TERZAN
Created:Wed Oct 15 1986
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:6756
Total number of notes:25276

6678.0. "Alternative 17-00442-19 for H7600" by JOBURG::HARRIS () Mon May 12 1997 01:33

17-00442-19            10A 250V        108 IN       IEC 320 C13,C14

I am looking for an alternative for the above part. 
This is a power cord used in a SA900 - From the power controller to the SA73.

My use will be for BA356's from the Power controller in the SA900./Rackmount
AS1000.   -H9C10-CH Cabinet with  H7600-DB EIA POWER DISRIBUTION

At a cost of $99.00 it is far too much.

The part number listed for 220volt in the AS1000 rackmount SOC is not 
available? ( -BN20Q-4E Power cords)


Any help will be greatly apprciated.
Regards Ivan
T.RTitleUserPersonal
Name		DateLines
6678.1HOUNDD::BASSETTBillMon May 12 1997 14:2939
    Ivan,
    
     Where did you get that description?  APPIX shows the following:
    
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    12-May-97/16:18:54                 A P P I X
    
                  PART DISPLAY
    
    PART IDENTIFIER: 17-00442-19. B01                DATE ADDED: 6-JUN-1985
    DESC: PWR CORD,TERM        9' LG   15A                          T HJ E
    PRICE BOOK DESCRIPTION: POWER CORD, TERM 9' LG 15A
    STD/ACTUAL: 1    MAKE/BUY: B1     UNIT OF MEAS: EA     PART TYPE: RAW
                                      XREF:                BOARD:  A01
    --------------------------- MAJOR SUPPLIER -----------------------------
    :  PRODUCT LINE: 190   STOCKROOM:  793 (PK )      BOM ID: PK           :
    ---------------------------- FAILURE RATE ------------------------------
    :   BENIGN:      .00194  FIXED:      .00233   STATUS: APPROVED         :
    --STANDARD COST & EFFECTIVE DATE---MAYNARD LIST PRICE & EFFECTIVE DATE--
    : $       4.590000    1-APR-1995      $       5.00        2-NOV-1992   :
    ------------------------------------------------------------------------
    CALC CODE: 0   INSERTABILITY:  NA  FCC STATUS:      VOLTAGE CODE:
              HP                           G            CE INDCR    :
                                                    A      CE LABEL VAR:
    BOM  AVAILABLE: No BOMS on APPIX
    
    *************************************************************************
    
    
     Since I used to work with the SA900, I've seen this cable before.  As
    you might have noticed in the APPIX display, it's rated at 15 Amps, not
    10A as your line said.  It's a pretty hefty cord for a cabinet, but you
    need it for the leakage currents from the older drive and enclosures.
    
     Also note that the APPIX cost is $4.59 Transfer and $5.00 MLP.  $99
    sounds like one of the SDI cables used in the SA900.  
    
    			OK?
    				Bill
6678.217-01699-03 Base note Part incorrect.JOBURG::HARRISTue May 13 1997 02:2615
    Hello Bill,
    
    AAAHHH I made a mistake...
    
       17-01699-03
    
       DESC: CABLE ASSY,TRIAX 93 OHM 16 COND                         
       PRICE BOOK DESCRIPTION: CABLE ASSY, TRIAX
       --STANDARD COST & EFFECTIVE DATE---MAYNARD LIST PRICE & EFFECTIVE
       : $      99.360000    1-JUL-1994      $     273.00        4-MAR-1996  
    
    Regards Ivan
6678.3HOUNDD::BASSETTBillTue May 13 1997 10:218
    yep, that's the SDI cable for an SA7x in an SA900.  (Don't worry about
    the mistake - you haven't gone over your quota for the month!)  :-)
    
    But don't you love it?  Both a $4 part and a $99 part are both 
    17-class cables!
    
    			Later,
    				Bill
6678.4noooooooooooooooooooooooooJOBURG::HARRISWed May 14 1997 02:222
    aaaaaaaaaaaaaaaaaaaaaHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH