Conference ssag::ask_ssag

6573.0. "68-pin female terminator internal to Prioris?" by OTOOA::JPOND () Fri Apr 11 1997 11:05

Hi there,
I crossposted this from the Prioris conference. I was wondering if anyone 
knew what part number the 68-pin female internal SCSI terminator would be.

Any help appreciated,
Jim

               <<< GVPROD::PRD18:[NOTES$LIBRARY]PRIORIS.NOTE;1 >>>
                                  -< Prioris >-
================================================================================
Note 260.0       68-pin female SCSI internal Prioris terminator?      No replies
58632::JPOND                                         21 lines  11-APR-1997 18:00
--------------------------------------------------------------------------------
    Hi there,
    
    I'm looking for the part number for the 68-pin female terminator that
    you use inside a Prioris ZX box to terminate the SCSI string if you
    pull the cable off the internal shelf (because the shelf has the
    terminator by default). I am attaching the top of the shelf to a Mylex
    so I need to terminate the original string which is still cabled to the
    internal SCSI.
    
    The reason I have this issue is that this system was ordered with a
    SWIKX-CB (three-channel StorageWorks version of the Mylex) instead of a
    FR-PCTAR-BE (PCBU version of the Mylex, same module exactly as the
    SWIKX-CB, but comes with internal cabling for the Prioris, including
    the terminator I am looking for).
    
    I also need the incremental cable, the one that attaches from the
    internal Mylex 68-pin connector to the top of the shelf. Fortunately, I
    have already located that one:  17-04143-01.
    
    Any pointers would be appreciated,
    Jim

     Terminator, SCSI 68 Position                12-41768-02
        Terminator, SCSI 68 Position Single Ended
          Active Internal                           12-45538-01
    
    
    Remember the top one needxs to be -03 for a 'split bus configuration'.
    
    chet

    Thanks for the pointer. I discovered the parts are actually not part of
    the Mylex kit(s), but instead come with the Prioris accessories box,
    which I just happened to throw out my mistake! Luckily, the customer
    had not yet put the cardboard in the trash.
    
    Thanks anyway,
    Jim