[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference spezko::cluster

Title:	+ OpenVMS Clusters - The best clusters in the world! +
Notice:	This conference is COMPANY CONFIDENTIAL. See #1.3
Moderator:	PROXY::MOORE

Created:	Fri Aug 26 1988
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	5320
Total number of notes:	23384

5316.0. "Mount Verification on MSCP served disks, no errors, why?" by HGOV05::KENNETH () Wed May 28 1997 06:25

Hi,

One of my customer told me that the MSCP served disk always get the following
message whenever accessing it.

%%%%%%%%%%%  OPCOM  28-MAY-1997 08:57:23.47  %%%%%%%%%%%
Device $2$DIA5: (CSDV02) is offline.
Mount verification is in progress.

%%%%%%%%%%%  OPCOM  28-MAY-1997 08:57:23.49  %%%%%%%%%%%
Mount verification has completed for device $2$DIA5: (CSDV02)

The configuration is as below:

		  |-------|			   |---------|
	[RF73]----| VAX A |-----------DSSI---------| VAX B   |
	[RF73]----|-------|                        |---------|
 MSCP serve disks


The message is displayed whenever there is an access from node VAX B, there 
is no message when accessing from node VAX A.   


The systems are running VAX 7610 and 7620 running VMS V5.5-2 for over 3 years
without problems.  There are no configuration changes.  These message
comes repeatly whenever there is an access from VAX B starting yesterday.

I have checked the errorlogs on both nodes, there is no error messages.

Is there anyone seen similar things before?  Any ideas?  What are the 
possible reasons for mount verification?

Thanks for your help in advance.

Kenneth Leung

T.R	Title	User	Personal Name	Date	Lines
5316.1		UTRTSC::jgoras-197-2-3.jgo.dec.com::JurVanDerBurg	Change mode to Panic!	`Wed May 28 1997 07:32`	4
	You may start looking for a shortage of nonpaged pool on both systems. Jur.
5316.2	Plenty of nonpaged pool left.	HGOV05::KENNETH		`Thu May 29 1997 05:10`	8
	Hi Jur., There are plenty nonpaged pool left there on both systems. Is there any other possible causes? I am really run out of ideas. Thanks again for your help. Kenneth Leung
5316.3	Check for connection loss, and latest Kit	VMSSPT::JENKINS	Kevin M Jenkins VMS Support Engineering	`Thu May 29 1997 10:49`	11
	Couple of things... Check the REINIT count of the CDDB for the drives that go into mountverification. Use $ANA/SYS SDA>SHOW DEV $x$DUAxxxx, hit CR till you see the CDDB screen, the count is in the midle. Second, are you running with a later version of the VAXDRIV kit? something like 04 or 05 that has DUDRIVER, if not try it. Kevin
5316.4	Reinit Count = 1	HGOV05::KENNETH		`Thu May 29 1997 23:54`	17
	Hi Kevin, The reinit count is equal to 1. Allocation class 2 CDRP Queue empty DDB address 84A16D00 System ID 00000408 Restart Queue empty CRB address 84A16C80 0000 DAP Count 0 CDDB link 82215B20 Contrl. ID 00000408 Contr. timeout 20 PDT address 821E43A0 01040000 Reinit Count 1 Original UCB 00000000 Response ID 00000000 Wait UCB Count 0 UCB chain 82219A10 MSCP Cmd status FFFFFFFF Is this cause the problem? Regards, Kenneth
5316.5	Also check other node	VMSSPT::JENKINS	Kevin M Jenkins VMS Support Engineering	`Mon Jun 02 1997 09:42`	8
	You will see mountverfication each time the connection is reinited. Since this is the MSCP connection, also check the CDDBs on the other node with the direct connection to see if they are being reinited. If so, you'll need to try and determine what is causing a loss of connection.
5316.6	Only 1 reinit count but several (repeating) mount ver	HGOV05::KENNETH		`Wed Jun 04 1997 04:23`	10
	I only see one Reinit count and zero on the direct connected node. However, there are repeat mountverification messages. Is there any other things that cause the mountverification? Thanks again for your help. Kenneth