[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference rocks::dec_edi

Title:	DEC/EDI
Notice:	DEC/EDI V2.1 - see note 2002
Moderator:	METSYS::BABER

Created:	Wed Jun 06 1990
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	3150
Total number of notes:	13466

3016.0. "Inserting header into unstructured documnet" by GIDDAY::REID (David Reid,CSC,Sydney DTN 730-7233) Sun Feb 16 1997 22:47

Greetings,

A bit of a big ask...

Customer running EDI V2.1 on Vax is sending out documents to a fax gateway which
acknowledges back with a clear text acknowledgement that document has been
recieved. Of course this does not "acknowledge" message to EDI.

A request from the Customer has been made to see if there is a way of
dynamically inserting in the header of the acknowledgement some data that will
allow the cancellation of the sent status...

Any thoughts, suggestions..

Thanks,

David R

T.R Title User Personal
Name Date Lines

3016.1 METSYS::THOMPSON Mon Feb 17 1997 09:57 12

T.R	Title	User	Personal Name	Date	Lines
3016.1		METSYS::THOMPSON		`Mon Feb 17 1997 09:57`	12
	Hi, There's nothing that you could put into the header. However there is some code lurking there that was meant to assist those writing their own CONTRL message systems. I think Marko Einamo has some code that does this. If the customer was able to make the ack look like an EDIFACT CONTRL you may be able to take advantage of that. Mark

Hi,

There's nothing that you could put into the header.

However there is some code lurking there that was meant to assist those
writing their own CONTRL message systems. 

I think Marko Einamo has some code that does this. If the customer was
able to make the ack look like an EDIFACT CONTRL  you may be able to
take advantage of that.

Mark