Title: | DECstation PC Conference |
Notice: | register note 2, see notes 3 & 4 |
Moderator: | TARKIN::LIN IND |
Created: | Tue Jan 10 1989 |
Last Modified: | Fri Jun 06 1997 |
Last Successful Update: | Fri Jun 06 1997 |
Number of topics: | 7470 |
Total number of notes: | 34994 |
Hi everybody..... We have a situation where a number of Prioris ZX6xxx and HX6xxx Servers are experiencing problems while shutting down. These servers have mylex pci raid controllers and are newly installed machines. Basically what happens during shutdown is all the icons disappear and the NT logo remains in the background. The mouse still works, but all disk activity stops. If the engineer on site stops the mylex monitor utility, then system shutsdown ok. This problem does not arise with NT3.51. We have tried the most recent mylex utility/driver kit v1.05, but to no avail. Has anybody else seen this or heard of this ? It definately sounds like a typical driver problem, but before I pursue it I was just wondering if any other poor soul has come across this. All the best Steve Kaniowski Region Support Australia [Posted by WWW Notes gateway]
T.R | Title | User | Personal Name | Date | Lines |
---|---|---|---|---|---|
7417.1 | check the driver. | PCBUOA::WHITEC | Parrot_Trooper | Fri Apr 18 1997 08:27 | 13 |
the driver for the mylex that ships with NT needs to be replaced if not already with the one in the 1.05 kit. I don't have a system handy to verify the revision of the new driver, but I 'think' it is 4.05k?? The k designates the newer driver. I believe the file is larger than the older one as well.....somewhere around 11 k vs the 9k or so, for the one that ships with NT4.0...... Go to the WINNT/system32/drivers and check the properties of the DAC960NT.sys file...... if it is not the version with k on the end, replace it. chet | |||||
7417.2 | This should be in tech tips. | SNOFS1::16.153.96.192::powellronald | Australia! | Mon Apr 21 1997 20:46 | 3 |
This would be a good candidate for the prioris tech tips. Ron. |