| Title: | Digital PostScript printers and their associated software |
| Moderator: | REGENT::LASKO HER |
| Created: | Wed Jan 24 1990 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 7230 |
| Total number of notes: | 31971 |
Hi, First of all, I don�t really now if this conference is the best for it. I�ve a Rapidprint 200 connected to a LG01 by the serial port.Every morning when the LG01 is powered on, the queue associated to it goes to stall.So, it�s necessary power off and on both, the printer and the rapidprint 200 in order to put the printer available. I have detected that when the user send the first job to the printer, the rapidprint loose two values: Connected node: (Normally here is the hostname) Protocol:none (Normally here is the type of the protocol, LAT) Until two rapidprints has been changed without changes. The serial cable, the adapter and the I/O serial interface of the LG01 has been changed also. The configuration is: Rapidprint 200 with firmware version 1.1.8 LG01 with serial port H8575-A with BN24H-03 cable Alphaserver 2100 with O.S: OpenVMS 6.2 Protocols used:MOP and LAT Thanks in advance Fernando Roldan [email protected] [Posted by WWW Notes gateway]
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 7192.1 | Need more info and an IPMT case | FUNYET::ANDERSON | OpenVMS pays the bills | Wed May 07 1997 16:25 | 17 |
> First of all, I don�t really now if this conference is the best for it. Considering the RapidPrint 200 is connected to an LG01 printer, this conference is probably not the place, but since there's no RapidPrint conference, maybe it *is* the place. The way to get action on this problem is to submit an IPMT case. You may want to consider these questions. � Does this behavior happen every time the printer is powered off? � Does this behavior happen only when the printer is powered off? � How are you noticing the RapidPrint loses the Node and Protocol values? � Does the problem always go away when both the printer and RapidPrint are powered on together? Paul | |||||
| 7192.2 | SANITY::LEMONS | And we thank you for your support. | Thu May 08 1997 17:13 | 4 | |
You might try cross-posting this in the TERMINAL_SERVERS notes file.
I've asked questions on the RapidPrint there in the past.
tl
| |||||