| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 7011.1 | You probably did not set this station up for booting and configuration | REGENT::WOLF | | Mon Dec 23 1996 11:03 | 13 |
| 7011.2 | Thanks for responding, but that's not it | ADOV01::JARMAN | | Mon Dec 23 1996 18:04 | 13 |
| 7011.3 | I just walked a customer through this yesterday | REGENT::WOLF | | Tue Dec 24 1996 11:02 | 19 |
| 7011.4 | Watch out for bootp in general | SCCAT::HARVEY | Printserver Support- America's Zone | Tue Dec 24 1996 11:52 | 8 |
| 7011.5 | Now there's something we may have done wrong! | ADOV01::JARMAN | | Wed Jan 01 1997 22:19 | 20 |
| 7011.6 | NSIS Consultant | NETRIX::"[email protected]" | Chris Wilson | Thu Jan 09 1997 01:58 | 21 |
| 7011.7 | Some things to check | SCCAT::HARVEY | Printserver Support- America's Zone | Thu Jan 09 1997 11:41 | 29 |
| 7011.8 | Try LPS17 | SHRMSG::HOWARD | Ben | Thu Jan 16 1997 11:04 | 8 |
| 7011.9 | LPS17 still doesn't work - more details | ADOV01::JARMAN | | Mon Jan 27 1997 20:20 | 28 |
| Firstly, a quick apology - it is indeed an LPS17, not LPS17/600.
We have tried to simplify things
The network now has 4 things on it
- a 10BT hub
- the LPS17 - hopefully cofigured as 10.0.0.200
- a pc running NT4 server with the LPS kit installed. This pc is
running IP (NOT DECnet) with the ip address of 10.0.0.201
- a pc running as a sniffer. The summary and detail traces are included
as the next two replies
My interpretation of the traces is that the printer is doing a BOOTP
request, the pc is responding with what looks like good answers, but
the printer never does anything with the response.
Note that as there are no routers in our simplified network, we have
attempted to manually write an arp table entry for the printer into the
pc's arp cache, but it gets overwritten all the time
Can anybody throw any light on this - the only thing we have thought of
is that he printer is relatively old, and has thus far only been
working in a DECnet environment, so maybe the printer itself is at
fault (old firmware or something??)
thanks
Brian Jarman
|
| 7011.10 | Sniffer summary | ADOV01::JARMAN | | Mon Jan 27 1997 20:21 | 157 |
| Sniffer Network Analyzer data from 22-Jan-97 at 16:33:44, file C:\CAPTURE\LPS.ENC, Page 1
SUMMARY Delta T Destination Source Summary
M 1 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
2 9.5170 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
3 2.5025 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
4 2.7857 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
5 2.9236 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
6 6.0097 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
7 6.8110 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
8 5.2085 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
9 2.3068 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
10 0.9986 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
11 2.0033 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
12 4.0065 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
13 2.0033 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
14 10.0163 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
15 2.0032 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
16 3.7060 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
17 6.0097 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
18 12.0195 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
19 2.4251 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
20 2.9837 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
21 6.0098 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
22 0.1946 DECnet387A8D DECnet387A8D Ethertype=0C0D (Unknown)
23 0.0103 DECnet387A8D DECnet387A8D Ethertype=0C0D (Unknown)
24 0.0005 DECnet387A8D DECnet387A8D Ethertype=0C0D (Unknown)
25 0.0002 DECnet387A8D DECnet387A8D Ethertype=0C0D (Unknown)
26 0.0002 DECnet387A8D DECnet387A8D Ethertype=0C0D (Unknown)
27 0.0002 DECnet387A8D DECnet387A8D Ethertype=0C0D (Unknown)
28 0.0002 DECnet387A8D DECnet387A8D Ethertype=0C0D (Unknown)
29 0.0012 DECnet387A8D DECnet387A8D Ethertype=0C0D (Unknown)
30 10.2119 DEC_Console DECnet387A8D MOP RC System ID Receipt=0
31 0.0006 DEC_Pmp/Load DECnet387A8D SNAP ID=DECnet Type=6001 (DEC MOP DL)
32 1.5997 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
33 1.8723 DEC_Pmp/Load DECnet387A8D SNAP ID=DECnet Type=6001 (DEC MOP DL)
34 1.7335 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
35 1.7383 DEC_Pmp/Load DECnet387A8D SNAP ID=DECnet Type=6001 (DEC MOP DL)
36 3.4720 DEC_Pmp/Load DECnet387A8D SNAP ID=DECnet Type=6001 (DEC MOP DL)
37 0.7994 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
38 2.6725 DEC_Pmp/Load DECnet387A8D MOP DL Request Program Device Type=UNKNOWN Program Type=System
39 3.4718 DEC_Pmp/Load DECnet387A8D MOP DL Request Program Device Type=UNKNOWN Program Type=System
40 3.4715 DEC_Pmp/Load DECnet387A8D MOP DL Request Program Device Type=UNKNOWN Program Type=System
41 2.4037 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
42 1.0682 DEC_Pmp/Load DECnet387A8D MOP DL Request Program Device Type=UNKNOWN Program Type=System
43 1.3374 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
44 2.1348 [255.255.255... [0.0.0.0] BOOTP Request
45 0.3929 [255.255.255... [10.0.0.201] BOOTP Reply
46 0.4756 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
47 2.6036 [255.255.255... [0.0.0.0] BOOTP Request
48 0.1090 [255.255.255... [10.0.0.201] BOOTP Reply
49 3.2973 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
Sniffer Network Analyzer data from 22-Jan-97 at 16:33:44, file C:\CAPTURE\LPS.ENC, Page 2
SUMMARY Delta T Destination Source Summary
50 0.0660 [255.255.255... [0.0.0.0] BOOTP Request
51 0.2119 [255.255.255... [10.0.0.201] BOOTP Reply
52 0.1205 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
53 3.0562 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
54 0.0836 [255.255.255... [0.0.0.0] BOOTP Request
55 0.2066 [255.255.255... [10.0.0.201] BOOTP Reply
56 3.2886 DEC_Pmp/Load DECnet387A8D SNAP ID=DECnet Type=6001 (DEC MOP DL)
57 2.5037 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
58 2.7043 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
59 1.7350 DEC_Pmp/Load DECnet387A8D SNAP ID=DECnet Type=6001 (DEC MOP DL)
60 6.9429 DEC_Pmp/Load DECnet387A8D SNAP ID=DECnet Type=6001 (DEC MOP DL)
61 0.6372 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
62 6.3055 DEC_Pmp/Load DECnet387A8D SNAP ID=DECnet Type=6001 (DEC MOP DL)
63 6.9422 DEC_Pmp/Load DECnet387A8D MOP DL Request Program Device Type=UNKNOWN Program Type=System
64 1.5979 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
65 2.9834 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
66 2.3621 DEC_Pmp/Load DECnet387A8D MOP DL Request Program Device Type=UNKNOWN Program Type=System
67 3.6476 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
68 3.2952 DEC_Pmp/Load DECnet387A8D MOP DL Request Program Device Type=UNKNOWN Program Type=System
69 0.0101 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
70 6.0097 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
71 0.9232 DEC_Pmp/Load DECnet387A8D MOP DL Request Program Device Type=UNKNOWN Program Type=System
72 1.7812 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
73 5.1622 [255.255.255... [0.0.0.0] BOOTP Request
74 0.1015 [255.255.255... [10.0.0.201] BOOTP Reply
75 4.0515 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
76 2.7901 [255.255.255... [0.0.0.0] BOOTP Request
77 0.1003 [255.255.255... [10.0.0.201] BOOTP Reply
78 6.8428 [255.255.255... [0.0.0.0] BOOTP Request
79 0.0993 [255.255.255... [10.0.0.201] BOOTP Reply
80 4.8930 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
81 1.9509 [255.255.255... [0.0.0.0] BOOTP Request
82 0.0990 [255.255.255... [10.0.0.201] BOOTP Reply
83 0.9533 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
84 1.0451 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
85 2.9614 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
86 1.9076 DEC_Pmp/Load DECnet387A8D SNAP ID=DECnet Type=6001 (DEC MOP DL)
87 0.0959 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
88 3.3051 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
89 6.0097 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
90 2.7043 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
91 0.0343 DEC_Pmp/Load DECnet387A8D SNAP ID=DECnet Type=6001 (DEC MOP DL)
92 3.9722 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
93 5.3086 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
94 2.8687 DEC_Pmp/Load DECnet387A8D SNAP ID=DECnet Type=6001 (DEC MOP DL)
95 12.1490 DEC_Pmp/Load DECnet387A8D SNAP ID=DECnet Type=6001 (DEC MOP DL)
96 3.8346 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
97 2.9832 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
98 2.2051 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
Sniffer Network Analyzer data from 22-Jan-97 at 16:33:44, file C:\CAPTURE\LPS.ENC, Page 3
SUMMARY Delta T Destination Source Summary
99 3.0033 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
100 0.1231 DEC_Pmp/Load DECnet387A8D MOP DL Request Program Device Type=UNKNOWN Program Type=System
101 5.8866 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
102 6.2620 DEC_Pmp/Load DECnet387A8D MOP DL Request Program Device Type=UNKNOWN Program Type=System
103 0.5490 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
104 5.2084 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
105 6.3919 DEC_Pmp/Load DECnet387A8D MOP DL Request Program Device Type=UNKNOWN Program Type=System
106 12.1489 DEC_Pmp/Load DECnet387A8D MOP DL Request Program Device Type=UNKNOWN Program Type=System
107 0.2913 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
108 3.0034 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
109 2.2050 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
110 3.0034 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
111 3.6461 [255.255.255... [0.0.0.0] BOOTP Request
112 0.1000 [255.255.255... [10.0.0.201] BOOTP Reply
113 2.2636 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
114 6.8110 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
115 2.9747 [255.255.255... [0.0.0.0] BOOTP Request
116 0.0985 [255.255.255... [10.0.0.201] BOOTP Reply
117 2.1353 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
118 9.9164 [255.255.255... [0.0.0.0] BOOTP Request
119 0.1001 [255.255.255... [10.0.0.201] BOOTP Reply
120 8.8157 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
121 3.0032 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
122 0.2309 [255.255.255... [0.0.0.0] BOOTP Request
123 0.1093 [255.255.255... [10.0.0.201] BOOTP Reply
124 5.6696 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
125 6.3996 DEC_Pmp/Load DECnet387A8D SNAP ID=DECnet Type=6001 (DEC MOP DL)
126 5.6198 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
127 15.2063 DEC_Console DECnet387A8D SNAP ID=DECnet Type=6002 (DEC MOP RC)
128 3.4718 DEC_Pmp/Load DECnet387A8D SNAP ID=DECnet Type=6001 (DEC MOP DL)
129 5.3625 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
130 1.4283 [10.0.0.255] [10.0.0.201] SMB C Transaction \MAILSLOT\BROWSE
131 1.5750 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
132 5.0112 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
133 0.9986 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
134 2.0032 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
135 6.0098 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
136 1.9093 DEC_Pmp/Load DECnet387A8D SNAP ID=DECnet Type=6001 (DEC MOP DL)
137 2.0972 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
138 8.0130 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
139 14.1882 DEC_Pmp/Load DECnet387A8D SNAP ID=DECnet Type=6001 (DEC MOP DL)
140 4.0544 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
|
| 7011.11 | Sniffer details on BOOTP frames | ADOV01::JARMAN | | Mon Jan 27 1997 20:23 | 190 |
| Sniffer Network Analyzer data from 22-Jan-97 at 16:33:44, file C:\CAPTURE\LPS.ENC, Page 1
- - - - - - - - - - - - - - - - Frame 44 - - - - - - - - - - - - - - - - -
SUMMARY Delta T Destination Source Summary
44 2.1348 [255.255.255... [0.0.0.0] BOOTP Request
BOOTP: ----- BOOTP Header -----
BOOTP:
BOOTP: Boot record type = 1 (Request)
BOOTP: Hardware address type = 1 10Mb Ethernet
BOOTP: Hardware address length = 6 bytes
BOOTP:
BOOTP: Hops = 0
BOOTP: Transaction id = 2B387A8D
BOOTP: Elapsed boot time = 0 seconds
BOOTP:
BOOTP: Client self-assigned IP address = [0.0.0.0] (Unknown)
BOOTP: Gateway IP address = [0.0.0.0]
BOOTP: Client hardware address = DECnet387A8D
BOOTP:
BOOTP: Host name = ""
BOOTP: Boot file name = ""
BOOTP:
BOOTP: Vendor Information tag = 63825363
BOOTP:
- - - - - - - - - - - - - - - - Frame 45 - - - - - - - - - - - - - - - - -
SUMMARY Delta T Destination Source Summary
45 0.3929 [255.255.255... [10.0.0.201] BOOTP Reply
BOOTP: ----- BOOTP Header -----
BOOTP:
BOOTP: Boot record type = 2 (Reply)
BOOTP: Hardware address type = 1 10Mb Ethernet
BOOTP: Hardware address length = 6 bytes
BOOTP:
BOOTP: Hops = 0
Sniffer Network Analyzer data from 22-Jan-97 at 16:33:44, file C:\CAPTURE\LPS.ENC, Page 19
BOOTP: Transaction id = 2B387A8D
BOOTP: Elapsed boot time = 0 seconds
BOOTP:
BOOTP: Client self-assigned IP address = [0.0.0.0] (Unknown)
BOOTP: Client server-assigned IP address = [10.0.0.200]
BOOTP: Server IP address = [10.0.0.201]
BOOTP: Gateway IP address = [10.0.0.201]
BOOTP: Client hardware address = DECnet387A8D
BOOTP:
BOOTP: Host name = "print-test"
BOOTP: Boot file name = "3"
BOOTP:
BOOTP: Vendor Information tag = 63825363
BOOTP: Unidentified tag 128
BOOTP: Domain Name Server address = [0.4.0.22]
BOOTP: Domain Name Server address = [166.1.4.255]
BOOTP: Domain Name Server address = [255.255.0.3]
BOOTP: Domain Name Server address = [4.10.0.0]
BOOTP: Domain Name Server address = [201.255.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = --- Frame too short
- - - - - - - - - - - - - - - - Frame 46 - - - - - - - - - - - - - - - - -
SUMMARY Delta T Destination Source Summary
46 0.4756 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
ARP: ----- ARP/RARP frame -----
ARP:
ARP: Hardware type = 1 (10Mb Ethernet)
ARP: Protocol type = 0800 (IP)
ARP: Length of hardware address = 6 bytes
ARP: Length of protocol address = 4 bytes
ARP: Opcode 1 (ARP request)
ARP: Sender's hardware address = 004033A0009F
ARP: Sender's protocol address = [10.0.0.201]
ARP: Target hardware address = 000000000000
ARP: Target protocol address = [10.0.0.200]
ARP:
- - - - - - - - - - - - - - - - Frame 47 - - - - - - - - - - - - - - - - -
Sniffer Network Analyzer data from 22-Jan-97 at 16:33:44, file C:\CAPTURE\LPS.ENC, Page 20
SUMMARY Delta T Destination Source Summary
47 2.6036 [255.255.255... [0.0.0.0] BOOTP Request
BOOTP: ----- BOOTP Header -----
BOOTP:
BOOTP: Boot record type = 1 (Request)
BOOTP: Hardware address type = 1 10Mb Ethernet
BOOTP: Hardware address length = 6 bytes
BOOTP:
BOOTP: Hops = 0
BOOTP: Transaction id = 2B387A8D
BOOTP: Elapsed boot time = 0 seconds
BOOTP:
BOOTP: Client self-assigned IP address = [0.0.0.0] (Unknown)
BOOTP: Gateway IP address = [0.0.0.0]
BOOTP: Client hardware address = DECnet387A8D
BOOTP:
BOOTP: Host name = ""
BOOTP: Boot file name = ""
BOOTP:
BOOTP: Vendor Information tag = 63825363
BOOTP:
- - - - - - - - - - - - - - - - Frame 48 - - - - - - - - - - - - - - - - -
SUMMARY Delta T Destination Source Summary
48 0.1090 [255.255.255... [10.0.0.201] BOOTP Reply
BOOTP: ----- BOOTP Header -----
BOOTP:
BOOTP: Boot record type = 2 (Reply)
BOOTP: Hardware address type = 1 10Mb Ethernet
BOOTP: Hardware address length = 6 bytes
BOOTP:
BOOTP: Hops = 0
BOOTP: Transaction id = 2B387A8D
BOOTP: Elapsed boot time = 0 seconds
BOOTP:
BOOTP: Client self-assigned IP address = [0.0.0.0] (Unknown)
BOOTP: Client server-assigned IP address = [10.0.0.200]
BOOTP: Server IP address = [10.0.0.201]
BOOTP: Gateway IP address = [10.0.0.201]
BOOTP: Client hardware address = DECnet387A8D
BOOTP:
BOOTP: Host name = "print-test"
BOOTP: Boot file name = "3"
BOOTP:
BOOTP: Vendor Information tag = 63825363
BOOTP: Unidentified tag 128
BOOTP: Domain Name Server address = [0.4.0.22]
Sniffer Network Analyzer data from 22-Jan-97 at 16:33:44, file C:\CAPTURE\LPS.ENC, Page 21
BOOTP: Domain Name Server address = [166.1.4.255]
BOOTP: Domain Name Server address = [255.255.0.3]
BOOTP: Domain Name Server address = [4.10.0.0]
BOOTP: Domain Name Server address = [201.255.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = [0.0.0.0]
BOOTP: Domain Name Server address = --- Frame too short
- - - - - - - - - - - - - - - - Frame 49 - - - - - - - - - - - - - - - - -
SUMMARY Delta T Destination Source Summary
49 3.2973 Broadcast 004033A0009F ARP C PA=[10.0.0.200] PRO=IP
ARP: ----- ARP/RARP frame -----
ARP:
ARP: Hardware type = 1 (10Mb Ethernet)
ARP: Protocol type = 0800 (IP)
ARP: Length of hardware address = 6 bytes
ARP: Length of protocol address = 4 bytes
ARP: Opcode 1 (ARP request)
ARP: Sender's hardware address = 004033A0009F
ARP: Sender's protocol address = [10.0.0.201]
ARP: Target hardware address = 000000000000
ARP: Target protocol address = [10.0.0.200]
ARP:
|
| 7011.12 | suspect firmware revision | NECSC::HARVEY | Printserver Support- America's Zone | Tue Jan 28 1997 19:18 | 17 |
| Brian,
I have a LPS17 not a LPS17/600 that is booting from my NT 3.51
server. I used ip addresses of 124.0.0.1 for my server and 124.0.0.2
for the LPS17. It boots kust fine everytime.
The only thing was that I am running the latest firmware for the
printer which is 2.1 version. To find what version your printer has
just power it up and after the ethernet hardware address is displayed
there will be 3 set of numbers displayed on the second line. The first
number is the key firmware version.
I would suspect your LPS13 is using the old firmware that will not
allow it to boot from a NT server. The part number for the roms are
23-251E8-00 for E19/ROM#0 and 23-252E8-00 for E24/ROM#1.
Renis
|
| 7011.13 | THANK YOU!!!!! | ADOV01::JARMAN | | Wed Jan 29 1997 18:04 | 9 |
| YES!!!
The numbers it displays are 1.0 1.0 1.0 - I guess this means V1
firmware
I will chase up new ROMS
thanks VERY MUCH
Brian
|
| 7011.14 | New part numbers for the ROMS | NECSC::HARVEY | Printserver Support- America's Zone | Wed Jan 29 1997 19:02 | 8 |
| Brian,
Glad that was it.
Oh I looked up the rom part niumbers and the 2.1 version part numbers
are 23-272E8-00 and 23-273E8-00.
Renis
|
| 7011.15 | Correct firmware => life is wonderful! | ADOV01::JARMAN | | Mon Feb 10 1997 20:55 | 6 |
| Just to close this out - MCS have upgraded the ROMs and it now works
just like we expected it should
thanks to all those who contributed
Brian
|
| 7011.16 | | REGENT::WOLF | | Mon Feb 17 1997 11:00 | 20 |
| Nice going Renis!!!!
Just to fill in the blanks, here is why the latest firmware is
required (and here is why it is crucial and reporting an outage to
INCLUDE the firmware and software version numbers in the outage along
with the correct product model number).
Because of architectural limitations of the operating systems, the
Novell, WNT and W95 kits perform the primary bootstrap differently
then do the U*IX kits as follows:
The printer broadcasts a bootp request
****The boot host responds with a bootp reply that is broadcast***
In version below V2.1 on the LPS17 and below 3.8 on the LPS20/32
the printer DOES NOT LOOK FOR A BROADCAST reply. This is why your
printer failed to boot.
I am glad Renis was able to get you up and running..
jeff
|
| 7011.17 | What about the driver problem | SHRMSG::HOWARD | Ben | Thu Feb 20 1997 16:20 | 3 |
| Any idea why the LPS17/600 driver won't boot it?
Ben
|
| 7011.18 | Its differences in booting methods | NECSC::HARVEY | Printserver Support- America's Zone | Thu Feb 20 1997 17:32 | 13 |
| Ben,
Based on Jeffs earlier reply the old 1.0 firmware would have booted
from a plain unix platform. However the NT and Netware environments use
a different method for responding to the printers boopt requests. The
supported firmware 2.1 version supports this new booting method.
This would be the same for the LPS17s big brothers, the TurboLPS20
and LPS32 printers. To boot from the above platfoms the supported
firmware is 3.8 version. The part number to get the upgraded firmware
is LPS2X-FW.
Renis
|
| 7011.19 | lps2x-fw can't be ordered | CSCMA::SMITH | | Tue Feb 25 1997 12:44 | 5 |
| lps2x-fw should be the correct firmware number, but it can't be ordered
for some reason (I wish I knew). You must get it from field service
(23-276E8-00, 23-277E8-00), this is for the lps32, lps20 turbos.
sharon
|