| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 2731.1 | | TARKIN::LIN | Bill Lin | Fri Jan 10 1997 21:10 | 8 |
| 2731.2 | SW that supports the tape drive | POMPY::LESLIE | andy ��� leslie, DTN 847 6586 | Mon Jan 13 1997 09:17 | 1 |
| 2731.3 | cbw95 was a freebie | WOTVAX::wazock.lzo.dec.com::taylor_m | | Wed Jan 15 1997 11:13 | 11 |
| 2731.4 | Arcada 1.1 Available and Works with TLZ06 | SUBSYS::KEELER | Gary N. Keeler 237-6982 | Wed Mar 05 1997 11:12 | 14 |
|
The Arcada software has been purchased by Seagate.
If you go to Seagate web page you will find version 1.1 of the Arcada
software disguised as Seagate 1.1. This apparently is free as I downloaded
it last week. I actually haven't installed this version but version 1.0
works nicely with the TLZ06 as well as the Colorado TRACKER Parrell Port
drive and many others.
http://www.smg.seagatesoftware.com/interim.htm
Regards,
Gary
|
| 2731.5 | Its an upgrade | WOTVAX::16.194.208.3::warder.reo.dec.com::sharkeya | Who am I now ? | Wed Mar 05 1997 13:32 | 4 |
| It says its an upgrade only.
Alan [who deleted his v1 'cause it didn't work]
|
| 2731.6 | Verion 2.0 Upgade available for $29 | SUBSYS::KEELER | Gary N. Keeler 297-2455 | Wed Mar 05 1997 16:36 | 12 |
| RE: .-1
Yes, I just discovered that too. If you have Version 1.0 you can get the
latest update from Seagate. I just ordered it for $29 plus MA tax. This
version is even better. You can not only backup to TLZ's and QIC's but also
to IOMEGA JAZ and ZIP drives.
TAke a look at the Upgrade page on the seagate web page I pointed to.
Regards,
Gary
|
| 2731.7 | just click your heels together,,, | SUBSYS::VIDIOT::PATENAUDE | Ask your boss for ARRAY's... | Thu Mar 06 1997 16:06 | 10 |
|
If your TLZ06 has a minimum of revision 4AX firmware on it you can
change it's indentity to an Archive Phyton by the flick of the sswitch
in the back of the tlz.If forget the sswitch number but the lable on
the drive shows it as "reserved". You have to power cycle the drive
after flicking. Almost all software packages know what a Python is, not
all know what a tlz06 is, hence the switch.
roger.
|
| 2731.8 | firmware updates - where? | NOKNOK::LANDRY | | Thu Mar 13 1997 12:02 | 3 |
| Is there anyway to get firmware updates for the tlz06? How do I tell
what revision I have now?
thanks, dave
|
| 2731.9 | | CSC32::J_KALINOWSKI | Forget NAM?....NEVER! | Thu Mar 13 1997 12:13 | 14 |
|
From the taskbar.....Run Regedit
Hkey_local_machine
Hardware
devicemap
scsi
scsi port #
scsi bus #
target ID #
Logical Unit ID #
Now look for the 4 digit hex code at the end of the identifier
field. Thats the current rev.
-john
|
| 2731.10 | check with your local field service folk... | SUBSYS::VIDIOT::PATENAUDE | Ask your boss for ARRAY's... | Thu Mar 13 1997 13:14 | 1 |
| they get field blitz's when new code tapes are available through SSB.
|
| 2731.11 | | LEFTY::CWILLIAMS | CD or not CD, that's the question | Thu Mar 13 1997 13:46 | 4 |
| 4BQD or 4BQE are the latest revs for the TLZ06...
Chris
|
| 2731.12 | anyone seen this? | SUBSYS::MSOUCY | MentalmETALMike | Fri Mar 14 1997 12:07 | 7 |
|
Anyone have trouble with their system after updating to V1.1? I had
worse graphics performance after doing an update from 1.0 to 1.1 with
their 2Mb patch.....I'll go back to 1.0 thank you, but then again I am
building a P133 tonight so maybe I'll try it again....
|