Conference noted::pwv50ift

    Could someone fix the file protections on the ECO files?
    
    Thanks,
    
    - Dave
    
    Directory SWOPS::USER1:[HYDRA.V50E-V10E-ECO1]
    
    ECO1_COVER_LETTER.TXT;1
                       insufficient privilege or object protection violation
    PWRKV50E_E01050.A;1
                       insufficient privilege or object protection violation
    PWRKV50E_E01050.B;1
                       insufficient privilege or object protection violation
    PWRKV50E_E01050.C;1
                       insufficient privilege or object protection violation
    PWRKV50E_E01050.D;1
                       insufficient privilege or object protection violation
    PWRKV50E_E01050.E;1
                       insufficient privilege or object protection violation
    PWRKV50E_E01050.F;1
                       insufficient privilege or object protection violation
    PWRKV50E_E01050.G;1
                       insufficient privilege or object protection violation
    PWRKV50E_E01050.H;1
                       insufficient privilege or object protection violation
    V10E_ECO1_NETWARE_NOTES.TXT;1
                       insufficient privilege or object protection violation
    V50E_ECO1_LANMAN_NOTES.TXT;1
                       insufficient privilege or object protection violation
    
    Total of 11 files, 0 blocks.
    
    

    re: .-1
    
    Please try again. It should be all set.
    
    
    -Jim
    
    PATHWORKS Server Engineering
    

    I put this in as a reply to 4168 and haven't gotten an answer and so I
    thought I would put it in as a reply here: 
     
================================================================================
Note 4168.14                      V5.0E-ECO1 ?                          14 of 14
CHOWDA::GLICKMAN "writing from Newport,RI"            2 lines  25-MAR-1997 12:01
                        -< How does a customer get it? >-
--------------------------------------------------------------------------------
    Will it be available from DSNlink?  Or how does a customer get it?
    
    Thanks!

    re .3
    
    It usually takes additional time before the kit is available in the
    DSNlink database.  Might want to get on Linda Downing's mailing list
    (ORABX::DOWNING_L) for PATHWORKS ECO announcements.  Linda can give a
    pretty good estimate as to when the kits show up in dsnlink and champ...
    
    Paul

I just checked, it cannot yet be ordered from DSNlink.

I'll add a reply here when I hear that SSB is geared up to accept orders for 
tapes from DSNlink and the US/CSC CHAMP system.

Sometimes the delay between TIMA accessibility and SSB accepting orders is
3 to 4 days. I've seen it take as long as two weeks.  Lately, its been 3 to 4
days.

The kit is too big to be electronically transferred over DSNlink. If a customer
orders it from there, they will be shipped a tape. For that reason, it does not
show up in DSNlink until SSB is ready to ship tapes.

Customers with valid support contracts CAN get it electronically from the
Digital Services Patch Web Page.  It is under the 'Contract-Only' or
'entitlement' section (since it is a complete kit).

For access to 'Contract-Only, customers need a 'key'. DSNlink support will
generate one for the customer.  They 'key' is not active until the day AFTER it
is requested. DSNlink support in the U.S is 800-354-9000, or the customer can
send VMSmail to DSN$DSNLINK, they need to include Full name, voice telephone and
FAX telephone.....or complete the Access agreement which appears at
http://www.service.digital.com/html/patch_entitle.html.
The customer will be faxed the 'key' along with instructions.

-Linda

The article in the ECO-Summary database for PWRKV50E_E01050 will show up in 
DSNlink tomorrow. Customers can use it to order tapes.

US/CSC personnel can now order it via CHAMP to send tapes from SSB.

A question from a customer....

Pathworks V5 (Lanmanager 2.2) Directory Replication Limit (1000 files)

Does someone know how to overcome the Pathworks V5 directory replication limit of 
1000 files in a directory (short of upgrading to Pathworks V6)?

We have a large network with many subnets supporting a single Windows NT 
(lanmanager 3.0) domain. The Subnet containing the Primary Domain controller 
(Windows NT) also contains several Pathworks V5 (Digital Unix V3.2C) servers. 
Some run other critical applications such as ORACLE which would entail a large
(unacceptable) downtime to upgrade to UNIX V4.0 & PATHWORKS V6.

The problem is that when 1000 files is reached in an import directory, file 
replication stops. (Yes 1000 files! including 1 file for each user's customized 
network connections). Replication will not recommence until the export file 
count drops below 1000 files and files are removed from the import directory 
on the server (to fall below the 1000 file limit).

I have found references to many implementations of LANMANAGER 2.2 servers having 
this limit (search Microsoft's Knowledge base on the Web - Q115391, point 20). 
Does anyone know why?

Windows NT and Pathworks V6.0 don't have this problem.

Does anyone have any ideas on how to resolve this problem?

We are currently contemplating turning off netlogon on the PATHWORKS servers 
during logon hours (creating user password update delays of up to one day on 
the PATHWORKS servers).


Any input welcome

Thanks in advance,


Greg Harkness
Sydney CSC

    What Directory Replication? Not on an OpenVMS V5.x server
    
    M

    If by "PATHWORKS v5" you mean PATHWORKS for DIGITAL UNIX v5 (LAN Manager), 
    you might check in ranger::pwosf