Conference bulova::decwindows

5797.0. "Error Code 132" by SANITY::LAPRADE (Sandy LaPrade) Thu Mar 06 1997 09:45

    Below is a Window manager log from a new Bret (AS 500) that we added 
    last night.
    Out of the eight that we added, four received this error message and
    windows will not start.  We tried swapping the graphics boards and put
    GYA where GYB was and vice versa.  Still receive the same error.  It shows
    GYB0 as being offline.  Could 4 of these system all have bad graphics
    boards?  
    
    Versions of software Currently running:
    OpenVMS  6.2-1H3
    Open3D   3.5
    Motif    1.2-3
    
    - Sandy
    
    
    
 6-MAR-1997 09:18:16.1 Hello, this is the X server
This is the DECwindows X11 display server for OpenVMS AXP T6.2-950505
		compiled on May  5 1995 at 04:29:36
Main address = 00032388
Activating extension image DECW$SVEXT_Adobe_DPS_Extension,
extension name: Adobe-DPS-Extension, entry address 002D82A8
Activating extension image DECW$SVEXT_Xie,
extension name: Xie, entry address 0045A690
Activating extension image DECW$SVEXT_DEC_XTRAP,
extension name: DEC-XTRAP, entry address 0052C560
Activating extension image DECW$SVEXT_Multi_Buffering,
extension name: Multi-Buffering, entry address 0056E0E0
Activating extension image DECW$SVEXT_X3D_PEX,
extension name: X3D-PEX, entry address 00622290
Activating extension image DECW$SVEXT_glx,
extension name: glx, entry address 006E4190
Activating extension image DECW$SVEXT_decstereo,
extension name: decstereo, entry address 00776058
DECW$TRANSPORT_COMMON image base address: 7F512000
DECW$TRANSPORT_LOCAL image base address: 007BA000
DECW$TRANSPORT_DECNET image base address: 007FC000
%DECW-I-ATTACHED, transport DECNET attached to its network
DECW$TRANSPORT_TCPIP image base address: 008EA000
%DECW-W-ATT_FAIL, failed to attach transport TCPIP
-SYSTEM-F-NOLOGNAM, no logical name match
DECWINDOWS DigitalEquipmentCorp. AXP, Release 6.2
Shareable Image DDX GY, InitOutput loaded at 0092FDB0

ffbvmsScreenInit: Init FFB screen number 0
Screen 0  sfb+/TGA  revision # 2070872098    8 bits/pixel   2039232 bytes VRAM
Shareable Image DDX GY, InitOutput loaded at 0092FDB0

ffbvmsScreenInit: Init FFB screen number 1
ffbvmsInitDevice: Can't get DVI, status: 132
%SYSTEM-F-DEVOFFLINE, device is not in configuration or not available

Unrecoverable server internal error (error code = 132) found, terminating all connections.
Mapped Images...
 
  START       END        LENGTH    IMAGE NAME
  -----       ---        ------    ----------
   10000      301ff      201ff    DECW$SERVER_MAIN
   32000     1a3bff     171bff    DECW$SERVER_DIX
  1a4000     1e41ff      401ff    DECW$SECURITY_VMS
7f4d2000   7f533fff      61fff    DECW$TRANSPORT_COMMON
82c109a0   82c1e4d0       db30    SYS$BASE_IMAGE
7f352000   7f3b3fff      61fff    DECC$SHR
7f0c2000   7f223fff     161fff    DPML$SHR
7f042000   7f073fff      31fff    LIBOTS
7f082000   7f0b3fff      31fff    CMA$TIS_SHR
7efe2000   7f033fff      51fff    LIBRTL
82c02af8   82c040e8       15f0    SYS$PUBLIC_VECTORS
  2d8000     4593ff     1813ff    DECW$SVEXT_ADOBE_DPS_EXTENSION
  45a000     52b3ff      d13ff    DECW$SVEXT_XIE
  52c000     56c3ff      403ff    DECW$SVEXT_DEC_XTRAP
  56e000     5be3ff      503ff    DECW$SVEXT_MULTI_BUFFERING
  5c0000     6205ff      605ff    DECW$SERVER_DEC_3DLIB
  622000     6e31ff      c11ff    DECW$SVEXT_X3D_PEX
  6e4000     7749ff      909ff    DECW$SVEXT_GLX
  776000     7b63ff      403ff    DECW$SVEXT_DECSTEREO
  7ba000     7fa3ff      403ff    DECW$TRANSPORT_LOCAL
  7fc000     8ccdff      d0dff    DECW$TRANSPORT_DECNET
  8ce000     8cf3ff       13ff    DECC$MSG
  8d0000     8d69ff       69ff    SHRIMGMSG
  8d8000     8e81ff      101ff    DECW$TRANSPORTMSG
  8ea000     92a3ff      403ff    DECW$TRANSPORT_TCPIP
  92c000     cbe7ff     3927ff    DECW$SERVER_DDX_GY_WMB

Exception Call stack dump follows: 
 
     PC     IMAGE+offset of call 
     --     -------------------- 
  9c52fc     DECW$SERVER_DDX_GY_WMB + 992fc 
  9c4058     DECW$SERVER_DDX_GY_WMB + 98058 
   b3764     DECW$SERVER_DIX + 81764 
  9c3ccc     DECW$SERVER_DDX_GY_WMB + 97ccc 
   faa8c     DECW$SERVER_DIX + c8a8c 
   b26dc     DECW$SERVER_DIX + 806dc 
 
********** marking the end of call stack dump **********
********************************************************

	This sounds like a sysgen parameter problem. You need to get the
	Open3D installation guide and verify the sysgen parameters are
	set properly. It sounds like the 2nd device did not go "online" 
	because of a resource problem. About the only thing that will
	prevent it from coming online is a failure to get the resources
	necessary to map the device.

	Send me mail if you need further help.

Dave Partridge
Open3D Software Engineering