| Title: | Windows NT For Alpha AXP |
| Moderator: | TARKIN::LIN EIBER |
| Created: | Mon Sep 27 1993 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 1058 |
| Total number of notes: | 4567 |
Hello,
My alphastation 200 will not see my de205 network card.
I have the card setup with the default setting (irq5) etc.
I have run the arc setup nicaxp.exe from the floppy I got
at http://www.service.digital.com:8031/
I boot to NT V4.0 and run winmsd and don't see the device
or any device for that matter on IRQ5. I also can boot this
machine with digital unix and see both network cards fine.
Is there some step that I missed.
Thanks
Ray Glauner
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 999.1 | TARKIN::LIN | Bill Lin | Wed Jan 29 1997 23:44 | 11 | |
re: CSC32::GLAUNER
Ray,
Did you load an Alpha NT driver for the DE205? I don't think the card
uses the IRQ resource until the driver is actually loaded. Under i386,
there is no DE205 driver bundled with the NT O.S. and I presume the
situation is the same for Alpha NT, so you need to load drivers from
that which is supplied by the NIC group.
/Bill
| |||||
| 999.2 | no better de205 nt | CSC32::GLAUNER | Thu Jan 30 1997 15:38 | 7 | |
Thanks Bill
I put in the de 205 driver off or digital support page, it even
had a program to put the device in the ARC, it still did not
make a difference, I rebooted unix and the netcard is still in there
so I know it is connected find any other ideas?
Ray
| |||||
| 999.3 | Proper ECU? | MPOS01::nqsrv201.nqo.dec.com::Cerling | Call on the Calvary | Thu Jan 30 1997 15:49 | 5 |
Did you run the NT ECU? There is a separate ECU for UNIX/VMS and NT. tgc | |||||