Conference cookie::sls

2264.0. "Sls seems to shut itself down??" by NIOPS1::THIBODEAU () Fri May 30 1997 10:38

    The following is a part of my TAPMGRDBXEQ.LOG
    Sls seems to be shutting itself down every so often. The RQ and opcom
    process is out there but no DB. Version is 2.7
    
%SLS-I-CONNECTED, connected to node DSSR2 at 30-MAY-1997 02:57:42.47
%SLS-I-CONNECTED, connected to node BPOV04 at 30-MAY-1997 02:57:50.14
%SLS-I-CONNECTED, connected to node MMONRO at 30-MAY-1997 02:57:57.92
%SLS-I-CONNECTED, connected to node HEPBRN at 30-MAY-1997 02:58:01.07
%SLS-I-CONNECTED, connected to node NICON1 at 30-MAY-1997 02:58:02.07
%SLS-I-CONNECTED, connected to node NRVANA at 30-MAY-1997 02:58:07.96
%SLS-I-CONNECTED, connected to node BCVAXA at 30-MAY-1997 02:58:09.04
%SLS-I-CONNECTED, connected to node OLMEC at 30-MAY-1997 02:58:17.65
%SLS-I-CONNECTED, connected to node TENVAX at 30-MAY-1997 02:58:50.95
%SLS-I-CONNECTED, connected to node CSSDEV at 30-MAY-1997 02:58:56.02
%SLS-I-CONNECTED, connected to node STORE4 at 30-MAY-1997 03:00:01.46
%SLS-I-CONNECTED, connected to node AVANT at 30-MAY-1997 03:16:23.63
%SLS-I-CONNECTED, connected to node EDMUND at 30-MAY-1997 03:27:37.82
%SLS-I-CONNECTED, connected to node HARRY at 30-MAY-1997 04:38:59.08
%SLS-I-CONNECTED, connected to node JFRSON at 30-MAY-1997 04:42:12.58
%SLS-I-CONNECTED, connected to node KNICK at 30-MAY-1997 06:45:42.12
%SLS-S-SHUTDONE, SLS shutdown complete
$!
$!  Tell operator TAPMGRDB has stopped
$!
$STOPPED:
$ STATUS = $STATUS
$ SET NOON
$ MSG := 
$ IF .NOT. STATUS THEN MSG = " - %SYSTEM-S-NORMAL, normal successful completion"
$ REQUEST/TO=(TAPES) -
	"TAPMGRDB has stopped - restart SLS"
$ IF STATUS THEN DELETE/LOG DSA4:[SLS$FILES].TRC;*/SINCE="29-MAY-1997 09:35:05.06"
%DELETE-W-SEARCHFAIL, error searching for DSA4:[SLS$FILES].TRC;*
-RMS-E-FNF, file not found
$ DEASSIGN/TABLE=LNM$SLS$TABLE TAPMGRDB_PROCID
$ EXIT STATUS + 0 * F$VERIFY (V)
  SLS          job terminated at 30-MAY-1997 10:23:07.84

  Accounting information:
  Buffered I/O count:          118380         Peak working set size:    1069
  Direct I/O count:             30042         Peak page file size:      7232
  Page faults:                   2360         Mounted volumes:             0
  Charged CPU time:           0 00:07:36.35   Elapsed time:     1 00:48:06.93

	Hi 

may be it's your problem:

Do you use DECNET/OSI 6.3 on  client nodes.
When  client shutting down running DECnet/OSI 6.3, OSI 6.3 sends "shutdown
message" which stops SLS on phase IV server.

This has been corrected with OSI 6.3 ECO6

  Henri

  Re .0,.1
    
  >  Do you use DECNET/OSI 6.3 on  client nodes.
  >  When  client shutting down running DECnet/OSI 6.3, OSI 6.3 sends
  >  "shutdown message" which stops SLS on phase IV server.
  >
  >  This has been corrected with OSI 6.3 ECO6
    
    This problem is described in SLS conference 1990.5 and 
    HELP::DECNET-OSI_FOR_VMS entry 2106.25.  
    The shutdown on the server happens every time SLS is stopped on an SLS 
    client (or shutdown on the client).
    
    Bart