| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 2698.1 | Probably not easily fixed | STAR::DZIEDZIC | Tony Dziedzic - DTN 381-2438 | Wed Sep 18 1996 09:40 | 177 |
| 2698.2 | maybe not the same problem, but... | EEMELI::BACKSTROM | bwk,pjp;SwTools;pg2;lines23-24 | Wed Sep 18 1996 15:59 | 4 |
| 2698.3 | | FRSBEE::BROOKS | Natural Born Hackers | Wed Sep 18 1996 16:22 | 9 |
| 2698.4 | | TARKIN::LIN | Bill Lin | Wed Sep 18 1996 16:39 | 8 |
| 2698.5 | | WHOS01::BOWERS | Dave Bowers @WHO | Wed Sep 18 1996 16:51 | 4 |
| 2698.6 | | STAR::DZIEDZIC | Tony Dziedzic - DTN 381-2438 | Thu Sep 19 1996 08:20 | 25 |
| 2698.7 | | AIAG::SEGER | This space intentionally left blank | Thu Sep 19 1996 08:46 | 6 |
| 2698.8 | Not good. | NETCAD::J_ADAMSKI | | Thu Sep 19 1996 12:31 | 7 |
| 2698.9 | | AIAG::SEGER | This space intentionally left blank | Thu Sep 19 1996 18:01 | 6 |
| 2698.10 | | STAR::DZIEDZIC | Tony Dziedzic - DTN 381-2438 | Thu Sep 19 1996 18:58 | 16 |
| 2698.11 | I, too, burned a VRC-16 | ODIXIE::GARABO | physically ph-f-f-f-t in Orlando | Thu Sep 19 1996 22:27 | 19 |
| 2698.12 | Re: My VRC16 died | QUABBI::"[email protected]" | Farrell T. Woods - Base OS Networking | Mon Sep 23 1996 15:31 | 36 |
| 2698.13 | | FBEDEV::KYZIVAT | Paul Kyzivat | Mon Sep 23 1996 16:13 | 15 |
| 2698.14 | Mine OKIE DOKIE too! Always in 800 x 600 mode. | JULIET::yosmte::HARRIS_MA | Sales Executive II | Mon Sep 23 1996 18:56 | 8 |
| 2698.15 | could the problem be in my video board? | AIAG::SEGER | This space intentionally left blank | Mon Sep 30 1996 14:16 | 12 |
| 2698.16 | Monitor going.... | SPIKED::SWEENEY | Tom Sweeney in LKG | Wed Oct 09 1996 13:16 | 13 |
| 2698.17 | | NCMAIL::SMITHB | | Sun Feb 02 1997 09:53 | 2 |
| Randomly my VRC16 will go blank for less than a second, and then come right
back. Any ideas?
|
| 2698.18 | | TUXEDO::WRAY | John Wray, Distributed Processing Engineering | Mon Feb 03 1997 14:22 | 14 |
| Mine was like that for a while. Now every so often it goes blank and
stays that way, even through a power-cycle. I've found a spot on one
side near the back where a sharp knock will restore the picture. I
borrowed another VRC16 from work, and it has exactly the same symptoms
(even the same place to hit to get the picture back). I've heard this
same problem from other VRC16 owners, so it seems to be a very common
failure mode. I'd start saving for a new monitor :-(
What resolution are you running at? Based on limited testing,
1024x768(NI) or higher seems to trigger the problem far more than
1024x768(I) or lower. Also I believe it's heat-related - usually the
problem only occurs after a reasonably long period of use.
John
|
| 2698.19 | | NCMAIL::SMITHB | | Mon Feb 03 1997 15:17 | 7 |
| I am running 640*480 pixels with adapter S3 and an unknown monitor type. This
is from a vanilla W95 install. The monitor goes blank within 5 minutes of
power up, and then is fine after that, at least that is what I have noticed
over the last few days...
Thanks,
Brad.
|
| 2698.20 | Me too | CADSYS::GROSS | The bug stops here | Mon Feb 03 1997 16:38 | 5 |
| I had a monitor that acted like that. It got progressively worse over
time and had to be replaced.
Dave
|
| 2698.21 | Me three... | CSC32::MARZULLA | | Wed Feb 05 1997 12:29 | 9 |
|
I had the same problem with my VRC16-CA but fortunately for me it was
still under DEC contract. The replacement one I got when the original
was swapped out worked OK for a year or so. Now it is very blurry and
needs to be tossed. I tried adjusting the focus which made it somewhat
better but it is still pretty bad.
Steve
|