| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 4422.1 | should work | FORBIN::WILKINSON | | Fri May 16 1997 15:03 | 7 |
| It should work. Are you using V.1.5 or later?
You do need to give the EA an in band IP address for it to work. That
address is in addition to the MAM IP address.
Hugh
|
| 4422.2 | chez moi ca marche pas.. | PRSSOS::PEYRACHE | Jean-Yves Peyrache Country Support Group France | Mon May 19 1997 05:41 | 12 |
|
Hugh,
i gave an IP address for the HUB in Band and an IP address
for the EA, i can access the EA alone via Multichassis or ping
but i can't access the in band address of the HUB.
if i replace the EA by another module like 90FS i can access
the hub via in band address hosted by 90FS
any comments will be appreciated,did you test this config before ?
JYP
|
| 4422.3 | must use at least V1.5 | NETCAD::FLOWERS | High Performance Networking; Dan | Mon May 19 1997 13:45 | 14 |
| > if i replace the EA by another module like 90FS i can access
> the hub via in band address hosted by 90FS
Try replacing the EA with a VNswitch EE, EX, or EF (if you have one of
these) and let us know.
> any comments will be appreciated,did you test this config before ?
For the EE/EX/EF, yes, and it definitely worked. I'm not so sure if the EA
was tested in this config.
What version of EA are you using?
Dan
|
| 4422.4 | different addresses? | FORBIN::WILKINSON | | Mon May 19 1997 17:00 | 12 |
| re: .2
Jean-Yves,
Did you give the Hub in Band and the EA in Band different IP address?
I am not sure if it matters, but is the Hub IP address in the same
subnet and the EA IP address, as defined by the EA in Band
subnet mask?
Hugh
|
| 4422.5 | different subnet | PRSSOS::PEYRACHE | Jean-Yves Peyrache Country Support Group France | Mon May 26 1997 02:51 | 8 |
|
Thanks all for your reply
there are in differents subnet address, i'll try in same subnet
difficult to ask customer to buy EX,EE,EF only for ip services..
JYP
|