[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

4413.0. "except vo=0c,sr=2708,pc=006029d0 failed" by KERNEL::SMITH_P () Wed May 14 1997 16:38

    
    I have a customer with a locked hub900 console port. The unit is
    running v5.0, all network modules are running but he has this in the
    lcd:
    
    vo=0c, sr=2708, pc=006029d0 failed
    
    Is this likely to be a problem with the mam?
    
    Thanks
    Paul.
T.RTitleUserPersonal
Name		DateLines
4413.1NETCAD::MILLBRANDTanswer mamWed May 14 1997 21:4924
Hi -

It's an address exception (there's no memory to access at 6029D0)
at IPL 7.  This is most likely a MAM firmware error.  Could also be
a firmware crash caused by a module with bent pins or other problem.

Please give us lots more information:

	- What version of MCM are you running?  (**Must be at least
	  V6.0 of MCM to operate with MAM V5.0.)

	- When MAM resets, does it get through self-test to where
	  the LCD says "Starting Main Firmware"?  Does it get 
	  through decompression to "Initializing..."?

	- What is the complete contents of the Error Log?  

	- What is the name and version level of each module in the hub?

	- What is your LAN Interconnect configuration?

	- Is a user doing anything specific when it crashes?

   Dotsie
4413.2NETCAD::DOODYMichael DoodyThu May 15 1997 11:044
    I suspect that the "Failed" means that it failed diagnostics and 
    it means a bad MAM board.
    
    -Mike